Order no.: PCE-CM 3
The PCE-CM 3 clamp on tester is used for quick and easy AC measurements. For current measurement, the PCE-CM 3 clamp on tester is plugged over the live conductor. The clamp on tester PCE-CM 3 is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
Manufacturer: PCE Instruments
US$ 68.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CM 3
The PCE-CM 3 current clamp is used for quick and easy AC measurements. For current measurement, the PCE-CM 3 current clamp is plugged over the live conductor. The current clamp PCE-CM 3 is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
Manufacturer: PCE Instruments
US$ 68.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CM 3
The PCE-CM 3 digital multimeter is used for quick and easy AC measurements. For current measurement, the PCE-CM 3 digital multimeter is plugged over the live conductor. The digital multimeter PCE-CM 3 is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
Manufacturer: PCE Instruments
US$ 68.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CBA 10

The Electrical Tester PCE-CBA 10 can be used as a car battery tester. To test the battery, the electrical tester can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.

- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

Manufacturer: PCE Instruments
US$ 68.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CM 3
The PCE-CM 3 HVAC meter is used for quick and easy AC measurements. For current measurement, the PCE-CM 3 HVAC meter is plugged over the live conductor. The HVAC meter PCE-CM 3 is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
Manufacturer: PCE Instruments
US$ 68.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MM 800

The PCE-MM 800 Inspection Camera is designed to display simple magnifications on a computer screen. For this purpose, the PCE-MM 800 inspection camera is connected to a screen. This allows a large presentation visible by several people. 


- 200 ... 1600-times magnification
- Bright LED lighting
- Maximum display: 1600 x 1200 pixels
- USB interface
- Digital zoom

 

Manufacturer: PCE Instruments
US$ 68.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MM 800

The PCE-MM 800 microscope is designed to display simple magnifications on a computer screen. For this purpose, the PCE-MM 800 microscope is connected to a screen. This allows a large presentation visible by several people. 


- 200 ... 1600-times magnification
- Bright LED lighting
- Maximum display: 1600 x 1200 pixels
- USB interface
- Digital zoom

 

Manufacturer: PCE Instruments
US$ 68.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CBA 10

The voltmeter PCE-CBA 10 can be used as a car battery tester. To test the battery, the voltmeter can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.

- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

Manufacturer: PCE Instruments
US$ 68.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-670
Digital thermometer PCE-670 for non-contact measurement of surface temperature. The PCE-670 digital thermometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
Manufacturer: PCE Instruments
US$ 67.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-670
HVAC meter PCE-670 for non-contact measurement of surface temperature. The PCE-670 HVAC meter has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
Manufacturer: PCE Instruments
US$ 67.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-670
Infrared thermometer PCE-670 for non-contact measurement of surface temperature. The PCE-670 infrared thermometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
Manufacturer: PCE Instruments
US$ 67.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-670
Pyrometer PCE-670 for non-contact measurement of surface temperature. The PCE-670 pyrometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
Manufacturer: PCE Instruments
US$ 67.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-670
Temperature meter PCE-670 for non-contact measurement of surface temperature. The PCE-670 temperature meter has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
Manufacturer: PCE Instruments
US$ 67.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-670
Thermometer PCE-670 for non-contact measurement of surface temperature. The PCE-670 thermometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
Manufacturer: PCE Instruments
US$ 67.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer