Dissolved Oxygen Meter PCE-PHD 1-O2
US$ 620.00
ex. VAT, ex. delivery costs

The Dissolved Oxygen Meter is a true all-rounder for checking the water quality. The portable oxygen meter is used to control the water parameters pH (optional), temperature (optional), conductivity (optional), salinity (optional) and oxygen.


- Oxygen: 0 ... 20 mg / l
- Real-time data logger
- SD card memory (16 GB max.)
- Manual or automatic temperature compensation
- BNC connector
- Suitable for laboratory and on-site measurement
- Electrode for oxygen included

Environmental Meter PCE-HPT 1
US$ 620.00
ex. VAT, ex. delivery costs

The environmental meter with microprocessor is a high precision 1-channel temperature gauge. The environmental meter with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.


- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2 % r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values

Environmental Tester PCE-HPT 1
US$ 620.00
ex. VAT, ex. delivery costs

The environmental tester with microprocessor is a high precision 1-channel temperature gauge. The environmental tester with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.


- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2 % r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values

Food Thermometer PCE-HPT 1
US$ 620.00
ex. VAT, ex. delivery costs
The microprocessor Food Thermometer is a highly accurate 1-channel temperature measuring device. The microprocessor Food Thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

- Measuring range: -100 ... +400 °C / -148 ... 752 °F
- Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 ... 82.4 °F) device only
- Resolution: 0.01 °C / 0.018 °F
- PT-100 sensor
Handheld Tachometer PCE-DSX 20 with Trigger Input
US$ 620.00
ex. VAT, ex. delivery costs
The handheld tachometer PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This handheld tachometer  has a small design and has a low weight. Thus, the handheld tachometer can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
HVAC Meter PCE-HPT 1
US$ 620.00
ex. VAT, ex. delivery costs

The HVAC Meter with microprocessor is a high precision 1-channel temperature gauge. The HVAC Meter with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.


- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2 % r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values

HVAC Meter PCE-P50-ICA Differential Pressure Incl. ISO Calibration Certificate
US$ 620.00
ex. VAT, ex. delivery costs
ISO Calibration
The HVAC Meter PCE-P50-ICA Differential Pressure with highest accuracy and best performance. With this HVAC meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The HVAC meter is ideal for use in industry, in service and in the laboratory.

- Range: ± 6900mbar / ± 100 psi
- Resolution: 4mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
- Incl. ISO calibration certificate
Pressure Gauge PCE-P50-ICA Incl. ISO Calibration Certificate
US$ 620.00
ex. VAT, ex. delivery costs
ISO Calibration
The pressure gauge PCE-P50-ICA with highest accuracy and best performance. With this pressure gauge you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure gauge is ideal for use in industry, in service and in the laboratory.

- Range: ± 6900mbar / ± 100 psi
- Resolution: 4mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
- Incl. ISO calibration certificate
Pressure Meter PCE-P50-ICA Incl. ISO Calibration Certificate
US$ 620.00
ex. VAT, ex. delivery costs
ISO Calibration
The pressure meter PCE-P50-ICA with highest accuracy and best performance. With this pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure meter is ideal for use in industry, in service and in the laboratory.

- Range: ± 6900mbar / ± 100 psi
- Resolution: 4mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
- Incl. ISO calibration certificate
Probe Thermometer PCE-HPT 1
US$ 620.00
ex. VAT, ex. delivery costs

The probe thermometer with microprocessor is a high precision 1-channel temperature gauge. The probe thermometer with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision. Each probe thermometer comes manufacturer calibrated and can be certified according to the ISO standards as an option.

 

- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2% r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values

Stroboscope PCE-DSX 20 with Trigger Input
US$ 620.00
ex. VAT, ex. delivery costs
The stroboscope PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This stroboscope has a small design and has a low weight. Thus, the stroboscope can be conveniently used even in measurements in hard to reach places.


Flash frequency: 50 ... 35000 FPM
- Accuracy: ±(0.05% of measured value + 2 Dgt)
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- with trigger input
Tachometer PCE-DSX 20 with Trigger Input
US$ 620.00
ex. VAT, ex. delivery costs
The tachometer PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This tachometer has a small design and has a low weight. Thus, the tachometer can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
Temperature Data Logger PCE-HPT 1
US$ 620.00
ex. VAT, ex. delivery costs

The Data Logger with microprocessor is a high precision 1-channel temperature gauge. The Data Logger with microprocessor is ideal for use with various Pt100 sensors. These temperature logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.


- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2% r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values

Temperature Data Logger PCE-HPT 1
US$ 620.00
ex. VAT, ex. delivery costs

The Temperature Data Logger with microprocessor is a high precision 1-channel temperature gauge. The Temperature Data Logger with microprocessor is ideal for use with various Pt100 sensors. These temperature logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.


- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2% r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values

Temperature Meter PCE-HPT 1
US$ 620.00
ex. VAT, ex. delivery costs
The Temperature Meter is a highly accurate 1-channel temperature measuring device. The Temperature Meter is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

- Measuring range: -100 ... +400 °C / -148 ... 752 °F
- Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 ... 82.4 °F) device only
- Resolution: 0.01 °C / 0.018 °F
- PT-100 sensor
Thermometer PCE-HPT 1
US$ 620.00
ex. VAT, ex. delivery costs
The microprocessor thermometer is a highly accurate 1-channel temperature measuring device. The microprocessor thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

- Measuring range: -100 ... +400 °C / -148 ... 752 °F
- Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 ... 82.4 °F) device only
- Resolution: 0.01 °C / 0.018 °F
- PT-100 sensor
Vibration Meter Stroboscope PCE-DSX 20-US with Trigger Input
US$ 620.00
ex. VAT, ex. delivery costs
The vibration meter stroboscope is mostly used for speed or vibration measurement or for motion observations. This vibration meter stroboscope has a small design and has a low weight. Thus, the vibration meter stroboscope can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
Air Humidity Meter PCE-VA 20-ICA incl. ISO Calibration Certificate
US$ 619.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-VA 20 is a versatile air humidity meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This air humidity meter device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate