Air Velocity Meter PCE-WSAC 50-320
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration
The Air Velocity Meter PCE-WSAC 50-320 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Air Velocity Meter PCE-WSAC 50-910
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

A strong wind is not esssential to use the PCE-WSAC 50-910 air velocity meter, as it has a measuring range of 0 to 110 mph. In addition to the actual wind speed, this versatile air velocity meter can display the average wind speed over the last two minutes and five minutes. The air velocity meter is suitable for numerous wind detection applications in outdoor industries, e.g. on construction sites.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 4...20 mA
- incl. ISO calibration certificate

Air Velocity Meter PCE-WSAC 50-920
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-WSAC 50-920 air velocity meter shows the speed of the wind and also the average figure over the prior two minutes and five minutes. The smallest wind motion is detected by this accurate air velocity meter. The timber industry, the mining industry, and the construction industry are some examples of applicable wind monitoring application areas for the air velocity meter.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 0...10 V
- incl. ISO calibration certificate

Anemometer PCE-WSAC 50-110
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration
The Anemometer PCE-WSAC 50-110 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Supply voltage: 230 V AC
- Input signal: 4 ... 20 mA
- 2 types of alarms
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Anemometer PCE-WSAC 50-120
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration
The Anemometer PCE-WSAC 50-120 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Anemometer PCE-WSAC 50-210
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration
The Anemometer PCE-WSAC 50-210 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Anemometer PCE-WSAC 50-220
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration
The Anemometer PCE-WSAC 50-220 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Anemometer PCE-WSAC 50-310
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration
The Anemometer PCE-WSAC 50-310 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Anemometer PCE-WSAC 50-320
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration
The Anemometer PCE-WSAC 50-320 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate
Anemometer PCE-WSAC 50-910
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

A strong wind is not esssential to use the PCE-WSAC 50-910 anemometer, as it has a measuring range of 0 to 110 mph. In addition to the actual wind speed, this versatile anemometer can display the average wind speed over the last two minutes and five minutes. The anemometer is suitable for numerous wind detection applications in outdoor industries, e.g. on construction sites.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 4...20 mA
- incl. ISO calibration certificate

Anemometer PCE-WSAC 50-920
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-WSAC 50-920 anemometer shows the speed of the wind and also the average figure over the prior two minutes and five minutes. The smallest wind motion is detected by this accurate anemometer. The timber industry, the mining industry, and the construction industry are some examples of applicable wind monitoring application areas for the anemometer.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 0...10 V
- incl. ISO calibration certificate

Climate Meter Alarm Controller PCE-WSAC 50
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-WSAC 50 is a climate meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This climate meter alarm controller allows measurement of the slightest of wind movements. The climate meter alarm controller is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

Decibel Meter PCE-SLT-24V
US$ 561.00
ex. VAT, ex. delivery costs
The decibel meter PCE-SLT-24V consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the transducer is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (discos, folk festivals, kart tracks ...).

- Measuring range: 30 ... 130 dB in three ranges
- Power supply: 24V DC
- Resolution: 0.1 dB
- Analog output signal 4 ... 20-mA
- Includes digital indicator with IP 65 rating
Environmental Meter Alarm Controller PCE-WSAC 50
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-WSAC 50 is an environmental meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This environmental meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

Environmental Meter PCE-PH20M
US$ 561.00
ex. VAT, ex. delivery costs
The environmental meter is a simple portable pH meter for food, e.g. meat. The practical display makes the pH value on the environmental meter easy to read. A recalibration always guarantees optimum accuracy and is very easy to perform using the optionally available calibration kits.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Probe designed for Food, Meat etc.
Environmental Tester Alarm Controller PCE-WSAC 50
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-WSAC 50 is an environmental tester alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This environmental tester alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

Environmental Tester PCE-PH20M
US$ 561.00
ex. VAT, ex. delivery costs
The environmental tester is a simple portable pH meter for food, e.g. meat. The practical display makes the pH value on the environmental tester easy to read. A recalibration always guarantees optimum accuracy and is very easy to perform using the optionally available calibration kits.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Probe designed for Food, Meat etc.
Food / Hygiene Meter PCE-PH20M
US$ 561.00
ex. VAT, ex. delivery costs
The Food  / Hygiene Meter PCE-PH20M is a simple portable pH meter for food, e.g. meat. The practical display makes the pH value on the pH meter easy to read. A recalibration always guarantees optimum accuracy and is very easy to perform using the optionally available calibration kits.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Designed for Food, Meat etc.