Query results | PCE Instruments

US$ 2,442.00

ex. VAT, ex. delivery costs

This Spectrophotometer is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The Spectrophotometer simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The color meter is delivered manufacturer calibrated, but can optionally be certified to ISO standards.

- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

Surface Testing - Colorimeter PCE-CSM 4

US$ 2,442.00

ex. VAT, ex. delivery costs

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement.

- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Stable performance
- Measurement of different colors
- Application for many surfaces
- Simple user interface
- Software included

Torque Meter PCE-DFG N 10TW-ICA incl. ISO Calibration Certificate

US$ 2,442.00

ex. VAT, ex. delivery costs

The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 10 Nm / 7.38 ft-lb
- Resolution: 0.005 Nm / 0.00369 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

Torque Meter PCE-DFG N 50TW-ICA incl. ISO Calibration Certificate

US$ 2,442.00

ex. VAT, ex. delivery costs

The torque meter consists of a hand-held measuring device and an external torque transducer. The torque meter is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 50 Nm / 36.88 ft-lb
- Resolution: 0.01 Nm / 0.00738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

Torque Meter PCE-DFG N 5TW-ICA incl. ISO Calibration Certificate

US$ 2,442.00

ex. VAT, ex. delivery costs

- Measurement range: 5 Nm / 3.69 ft-lb
- Resolution: 0.001 Nm / 0.000738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

Electrical Tester PCE-IT 150

US$ 2,441.00

ex. VAT, ex. delivery costs

The electrical tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the electrical tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Insulation Tester PCE-IT 150

US$ 2,441.00

ex. VAT, ex. delivery costs

The insulation tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the insulation tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Isolation Meter PCE-IT 150

US$ 2,441.00

ex. VAT, ex. delivery costs

The isolation meter is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the isolation meter.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

PAT Tester PCE-IT 150

US$ 2,441.00

ex. VAT, ex. delivery costs

The PAT tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the PAT tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Photovoltaic Meter PCE-IT 150

US$ 2,441.00

ex. VAT, ex. delivery costs

The photovoltaic meter is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the photovoltaic meter.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Automotive Tester / Borescope PCE-VE 350HR3

US$ 2,435.00

ex. VAT, ex. delivery costs

The automotive tester PCE-VE 350HR3 is a two-way articulating videoscope, industrial endoscope, borescope or inspection camera for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.

- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Diameter: Ø 6 mm / 0.24"
- 2-way camera
- Memory: 8 GB SD memory card (incl.)
- Cable length: 3 m / 9ft 10"

Car Measuring Device PCE-VE 350HR3

US$ 2,435.00

ex. VAT, ex. delivery costs

PCE-VE 350HR3 is a two-way articulating car measuring device for engine and turbine inspection, and for the non-destructive inspection (NDI) of other hard-to-reach places. The waterproof camera head of this type of car measuring device features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.

Condition Monitoring - Inspection Camera PCE-VE 350HR3

US$ 2,435.00

ex. VAT, ex. delivery costs

PCE-VE 350HR3 is a two-way articulating inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.

HVAC Meter PCE-VE 350HR3

US$ 2,435.00

ex. VAT, ex. delivery costs

The HVAC meter PCE-VE 350HR3 is a two-way articulating videoscope, industrial endoscope, borescope or inspection camera for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.

Industrial Borescope PCE-VE 350HR3

US$ 2,435.00

ex. VAT, ex. delivery costs

PCE-VE 350HR3 is a two-way articulating industrial borescope for engine and turbine inspection, and for the non-destructive inspection (NDI) of other hard-to-reach places. The waterproof camera head of this type of industrial borescope features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.

Inspection Camera PCE-VE 350HR3

US$ 2,435.00

ex. VAT, ex. delivery costs

NDT Test Instruments PCE-VE 350HR3

US$ 2,435.00

ex. VAT, ex. delivery costs

Snake Camera PCE-VE 350HR3

US$ 2,435.00

ex. VAT, ex. delivery costs

PCE-VE 350HR3 is a two-way articulating inspection snake camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.