Three-Phase Power Meter PCE-360
US$ 2,211.00
ex. VAT, ex. delivery costs

This device is a Three-Phase Power Meter / 3-Phase Power Analyzer with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 

Color Matching PCE-CIC 10-US
US$ 2,202.00
ex. VAT, ex. delivery costs

A Color Matching is used wherever products must have the same color properties during production. A Color Matching contributes to quality control. The Color Matching is a simulation instrument which is capable of displaying certain situations in order to analyze color characteristics of individual samples by means of different light types.


- Color assessment under different light types
- With hour counter
- Short warm-up time
- According to ASTM D1729, ISO3664, DIN, ANSI, BSI

 

Automotive Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Car Measuring Device PCE-CT 100N-ICA incl. ISO Calibration Certificate
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The car measuring device works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the car measuring device are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Coating Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
IoT Sensor PCE-CT 100N-ICA incl. ISO Calibration Certificate
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The IoT sensor works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the IoT sensor are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Material Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The material thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the material thickness meter are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
NDT Test Instruments PCE-CT 100N-ICA incl. ISO Calibration Certificate
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
NDT Tester - Surface Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The coating thickness NDT Tester - surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the NDT tester are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Paint Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The paint thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the paint thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Paint Thickness Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Surface Testing - Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Cert.
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The surface testing - coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate
US$ 2,196.00
ex. VAT, ex. delivery costs
ISO Calibration
The coating thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness meter are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Universal Testing Machine PCE-HTS 50
US$ 2,196.00
ex. VAT, ex. delivery costs
The motorized tension-compression Universal Testing Machine is a motorized test station with a force range of up to 500 N. With the help of the horizontal Universal Testing Machine, it is possible to to carry out tension-compression tests.

- Force range: 500 N / 50 kg / 110 lb
- Distance display resolution: 0.02 mm
- Resolution: 1 mm/min
- Tensile and compression testing
- Travel: 270 mm / 10.6"
Electrical Tester PCE-MO 3001
US$ 2,192.00
ex. VAT, ex. delivery costs

Electrical Tester in a robust case with a resolution of up to 1 μΩ.


- Four-wire method
- Six selectable measuring ranges
- Large LCD display
- Max. Current is 1 A
- Safety: EN 61010-1


Microohm-Meter PCE-MO 3001
US$ 2,192.00
ex. VAT, ex. delivery costs

Microohm-Meter in a robust case with a resolution of up to 1 μΩ.


- Four-wire method
- Six selectable measuring ranges
- Large LCD display
- Max. current is 1 A
- Safety: EN 61010-1 

 

Clamp-on Ultrasonic Flow Meter PCE-TDS 100H-ICA incl. ISO Calibration Certificate
US$ 2,190.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-TDS 100H-ICA is a portable handheld clamp-on Clamp-on Ultrasonic Flow Meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. ISO Calibration Certificate