Query results | PCE Instruments

Crane Scales PCE-DDM 3-ICA Incl. ISO Calibration

US$ 2,064.00

ex. VAT, ex. delivery costs

The crane scales are ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the crane scales. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Force Gage PCE-DDM 3-ICA Incl. ISO Calibration

US$ 2,064.00

ex. VAT, ex. delivery costs

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Force Gauge PCE-DDM 3-ICA Incl. ISO Calibration

US$ 2,064.00

ex. VAT, ex. delivery costs

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Hanging Scales PCE-DDM 3-ICA Incl. ISO Calibration

US$ 2,064.00

ex. VAT, ex. delivery costs

The PCE-DDM 3 Hanging Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 3 Hanging Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Comes with remote control indicator
- Incl. ISO calibration certificate

Suspended Scale PCE-DDM 3-ICA Incl. ISO Calibration

US$ 2,064.00

ex. VAT, ex. delivery costs

The suspended scale is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the suspended scale. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs

- Resolution: 1 kg / 10 N

- Minimum load: 10 kg

- Supplied with remote control indicator

- Incl. ISO calibration certificate

Tension Dynamometer PCE-DDM 3-ICA Incl. ISO Calibration

US$ 2,064.00

ex. VAT, ex. delivery costs

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Weighing Hook PCE-DDM 3-ICA Incl. ISO Calibration

US$ 2,064.00

ex. VAT, ex. delivery costs

The PCE-DDM 3 Weighing Hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 3 Weighing Hook is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

HVAC Meter PCE-TDS 75

US$ 2,059.00

ex. VAT, ex. delivery costs

The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output

Portable Ultrasonic Flow Meter PCE-TDS 75

US$ 2,059.00

ex. VAT, ex. delivery costs

The Portable Ultrasonic Flow Meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the Portable Ultrasonic Flow Meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output

Ultrasonic Flow Meter PCE-TDS 75

US$ 2,059.00

ex. VAT, ex. delivery costs

The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output

Ultrasonic Flow Meter PCE-TDS 75

US$ 2,059.00

ex. VAT, ex. delivery costs

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1%
(of the measured value)
- Pipe size: DN 25 ... 1200 mm
- Interface: RS232 & RS485
- Relay output

Ultrasonic Flow Tester PCE-TDS 75

US$ 2,059.00

ex. VAT, ex. delivery costs

The ultrasonic flow tester is a fixed installation meter. The flow rate of liquids in pipes can be determined with this ultrasonic flow tester. The sensors from the ultrasonic flow tester can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output

Environmental Meter Kit PCE-PVA 100-SPM 1-KIT

US$ 2,046.00

ex. VAT, ex. delivery costs

The environmental meter kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental meter PCE-PVA 100
- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer

Environmental meter PCE-SPM 1
- Measuring range: 0 ... 2000 W/m²
- Resolution: 1 W/m²
- Accuracy: ± 10 W/m² or ± 5%
- Data memory: 32,000 measured values
- Application, e.g .: photovoltaic systems

Environmental Tester Kit PCE-PVA 100-SPM 1-KIT

US$ 2,046.00

ex. VAT, ex. delivery costs

The environmental tester kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental tester PCE-PVA 100
- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer

Environmental tester PCE-SPM 1
- Measuring range: 0 ... 2000 W/m²
- Resolution: 1 W/m²
- Accuracy: ± 10 W/m² or ± 5%
- Data memory: 32,000 measured values
- Application, e.g .: photovoltaic systems

Photovoltaic Meter Kit PCE-PVA 100-SPM 1-KIT

US$ 2,046.00

ex. VAT, ex. delivery costs

The photovoltaic meter kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Photovoltaic meter PCE-PVA 100
- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer

Solar measuring device PCE-SPM 1
- Measuring range: 0 ... 2000 W/m²
- Resolution: 1 W/m²
- Accuracy: ± 10 W/m² or ± 5%
- Data memory: 32,000 measured values
- Application, e.g .: photovoltaic systems

Radiation Detector Kit PCE-PVA 100-SPM 1-KIT

US$ 2,046.00

ex. VAT, ex. delivery costs

The radiation detector kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Radiation detector PCE-PVA 100
- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer

Radiation detector PCE-SPM 1
- Measuring range: 0 ... 2000 W/m²
- Resolution: 1 W/m²
- Accuracy: ± 10 W/m² or ± 5%
- Data memory: 32,000 measured values
- Application, e.g .: photovoltaic systems

Radioactivity Meter Kit PCE-PVA 100-SPM 1-KIT

US$ 2,046.00

ex. VAT, ex. delivery costs

The radioactivity meter kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental meter PCE-PVA 100
- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer

Environmental meter PCE-SPM 1
- Measuring range: 0 ... 2000 W/m²
- Resolution: 1 W/m²
- Accuracy: ± 10 W/m² or ± 5%
- Data memory: 32,000 measured values
- Application, e.g .: photovoltaic systems

Solar Measuring Device Kit PCE-PVA 100-SPM 1-KIT

US$ 2,046.00

ex. VAT, ex. delivery costs

The solar measuring device kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Solar measuring device PCE-PVA 100
- Measuring range: 0 ... 12 A DC
- Three different test functions
- PC interface for data transfer

Solar measuring device PCE-SPM 1
- Measuring range: 0 ... 2000 W/m²
- Resolution: 1 W/m²
- Accuracy: ± 10 W/m² or ± 5%
- Data memory: 32,000 measured values
- Application, e.g .: photovoltaic systems