Industrial Measurement Products and Solutions
Order no.: PCE-WV A
The Air Flow Meter was developed to measure the wind direction in the industrial environment. This Air Flow Meter can be connected to data loggers, process control systems, displays. A 4 ... 20 mA signal is available as an output signal on the Air Flow Meter.
 
- Measuring range:  0 ... 360 °
- Output:  4 ... 20 mA 
- Measurement from: 0.8 m / s
Manufacturer: PCE Instruments
US$ 186.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WV A
The Electronic Weather Vane was developed to measure the wind direction in the industrial environment. This Electronic Weather Vane can be connected to data loggers, process control systems, displays. A 4 ... 20 mA signal is available as an output signal on the Electronic Weather Vane.
 
- Measuring range:  0 ... 360 ° 
- Output:  4 ... 20 mA 
- Measurement from: 0.8 m / s
Manufacturer: PCE Instruments
US$ 186.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WV A
The Environmental Wind Direction Meter was developed to measure the wind direction in the industrial environment. This Environmental Wind Direction Meter can be connected to data loggers, process control systems, displays. A 4 ... 20 mA signal is available as an output signal on the Environmental Wind Direction Meter.
 
- Measuring range:  0 ... 360 °
- Output:  4 ... 20 mA 
- Measurement from: 0.8 m / s
Manufacturer: PCE Instruments
US$ 186.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WV A
The Environmental Wind Direction Tester was developed to measure the wind direction in the industrial environment. This Environmental Wind Direction Tester can be connected to data loggers, process control systems, displays. A 4 ... 20 mA signal is available as an output signal on the Environmental Wind Direction Tester.

- Measuring range:  0 ... 360 °
- Output:  4 ... 20 mA 
- Measurement from: 0.8 m / s
Manufacturer: PCE Instruments
US$ 186.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WV A
The weather station was developed to measure the wind direction in the industrial environment. This weather station can be connected to data loggers, process control systems, displays. A 4 ... 20 mA signal is available as an output signal on the weather station .
 
- Measuring range:  0 ... 360 °
- Output:  4 ... 20 mA 
- Measurement from: 0.8 m / s
Manufacturer: PCE Instruments
US$ 186.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WV A
The Wind Direction Meter was developed to measure the wind direction in the industrial environment. This Wind Direction Meter can be connected to data loggers, process control systems, displays. A 4 ... 20 mA signal is available as an output signal on the wind measuring device.
 
- Measuring range:  0 ... 360 ° 
- Output:  4 ... 20 mA 
- Measurement from: 0.8 m / s
Manufacturer: PCE Instruments
US$ 186.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WV A
The Wind Measurement Device was developed to measure the wind direction in the industrial environment. This Wind Measurement Device can be connected to data loggers, process control systems, displays. A 4 ... 20 mA signal is available as an output signal on the wind measuring device.
 
- Measuring range:  0 ... 360 ° 
- Output:  4 ... 20 mA 
- Measurement from: 0.8 m / s
Manufacturer: PCE Instruments
US$ 186.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CM 40
The flexible clamp meter PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible clamp meter PCE-CM 40 can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PCM 1

PCE-PCM 1 is a multipurpose clamp meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PCM 1

PCE-PCM 1 is a multipurpose clamp-on tester or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PH 30
The conductivity meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable conductivity meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CM 40
The flexible current clamp PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible current clamp PCE-CM 40 can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PCM 1

PCE-PCM 1 is a multipurpose current clamp or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CM 40
The flexible digital multimeter PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible digital multimeter PCE-CM 40 can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PCM 1

PCE-PCM 1 is a multipurpose digital multimeter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-127/4
DIN flow cup meters are viscosity meters to determine the viscosity of liquids. The flow cup meters are often used in industry and research laboratories.

- Capacity: 100 ml
- Ø nozzle: 4 mm (± 0.02 mm)
- Material: anodized aluminum
- Standard: DIN 53211
Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-127/4
DIN flow cup viscometers are viscosity meters to determine the viscosity of liquids. The flow cup viscometers are often used in industry and research laboratories.

- Capacity: 100 ml
- Ø nozzle: 4 mm (± 0.02 mm)
- Material: anodized aluminum
- Standard: DIN 53211
Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PCM 1

PCE-PCM 1 is a multipurpose electrical tester or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PH 22-ICA

The environmental meter is used for fast and accurate detection of pH and temperature. Due to the practical double display, both values ​​can be read simultaneously on the environmental meter.


- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PH 30
The environmental meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
US$ 185.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer