Water Analysis Meter PCE-PH 28L-ICA incl. ISO Calibration Certificate
US$ 402.00
ex. VAT, ex. delivery costs
ISO Calibration
The water analysis meter is equipped with a flat electrode membrane which is installed in a shaft. So with the water analysis meter you can measure samples of viscous media in test tubes. This feature makes it possible to use very small volumes of liquids in beakers or test tubes. As a result, the water analysis meter can be used not only in the field but also in the laboratory.

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F  
- Flat pH electrode with long shaft
- Automatic temperature compensation
- For small sample quantities
- incl. ISO Calibration Certificate
Dissolved Oxygen Meter Gasman-O2 "Oxygen"
US$ 400.64
ex. VAT, ex. delivery costs

The Dissolved Oxygen Meter is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NO2 (Oxygen)
- Dust and water resistant - IP 65/67
- 0... 25% v/v

Absolute Moisture Meter for Soil PCE-SMM 1
US$ 396.00
ex. VAT, ex. delivery costs

PCE-SMM 1 is an absolute moisture meter for soil ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications. This portable handheld moisture meter or analyzer measures soil moisture or humidity quickly, easily and accurately.


- Moisture measurement range: 0 ... 50 %
- Resolution: 0.1 %
- Accuracy: ±5 % +5 digits
- 250 mm / 9.84" long probe

 

Accelerometer Data Logger PCE-VDL 24I 3-Axis
US$ 396.00
ex. VAT, ex. delivery costs
For this data logger PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- Evaluation software
- 32 GB SD memory card
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Accelerometer PCE-VDL 24I 3-Axis
US$ 396.00
ex. VAT, ex. delivery costs
For this accelerometer PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Condition Monitoring Vibration Meter PCE-VDL 24I 3-Axis
US$ 396.00
ex. VAT, ex. delivery costs
For this vibration meter PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Damp Meter for Soil PCE-SMM 1
US$ 396.00
ex. VAT, ex. delivery costs

PCE-SMM 1 is a damp meter for soil ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications. This portable handheld moisture meter or analyzer measures soil moisture or humidity quickly, easily and accurately.


- Moisture measurement range: 0 ... 50 %
- Resolution: 0.1 %
- Accuracy: ±5 % +5 digits
- 250 mm / 9.84" long probe

 

Force Gage PCE-FM 200
US$ 396.00
ex. VAT, ex. delivery costs
The force gage PCE-FM 200 is a handheld device that measures up to 200 N. The force gage can determine the units N, kg and lb. The force gage is supplied with various adapters that have different shapes. The force gage can measure both tensile and compressive forces.

- Measuring range: 2 ... 200 N / 0.2 ... 20  kg / 0.4 ... 45 lbs
- Measurement accuracy: ±0.5%
- Units: N, KG, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
Force Gauge PCE-FM 200
US$ 396.00
ex. VAT, ex. delivery costs
The force gauge PCE-FM 200 is a handheld device that measures up to 200 N. The force gauge can determine the units N, kg and lb. The force gauge is supplied with various adapters that have different shapes. The force gauge can measure both tensile and compressive forces.


- Measuring range: 2 ... 200 N / 0.2 ... 20  kg / 0.4 ... 45 lbs
- Measurement accuracy: ±0.5%
- Units: N, KG, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
Humidity Detector PCE-SMM 1
US$ 396.00
ex. VAT, ex. delivery costs

PCE-SMM 1 is a soil humidity detector ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications. This portable handheld humidity detector measures soil moisture or humidity quickly, easily and accurately.


- Moisture measurement range: 0 ... 50 %
- Resolution: 0.1 %
- Accuracy: ±5 % +5 digits
- 250 mm / 9.84" long probe

 

Shock Data Logger PCE-VDL 24I 3-Axis
US$ 396.00
ex. VAT, ex. delivery costs
For this shock data logger PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Soil Moisture Analyzer PCE-SMM 1
US$ 396.00
ex. VAT, ex. delivery costs

PCE-SMM 1 is a soil moisture analyzer ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications. This portable handheld moisture analyzer or meter measures soil moisture or humidity quickly, easily and accurately.


- Moisture measurement range: 0 ... 50 %
- Resolution: 0.1 %
- Accuracy: ±5 % +5 digits
- 250 mm / 9.84" long probe

 

Soil Moisture Meter PCE-SMM 1
US$ 396.00
ex. VAT, ex. delivery costs

PCE-SMM 1 is a soil moisture meter ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications. This portable handheld moisture meter or analyzer measures soil moisture or humidity quickly, easily and accurately.


- Moisture measurement range: 0 ... 50 %
- Resolution: 0.1 %
- Accuracy: ±5 % +5 digits
- 250 mm / 9.84" long probe

 

Surface Testing - Coating Thickness Gauge PCE-CT 26
US$ 396.00
ex. VAT, ex. delivery costs

The PCE-CT26 coating thickness gauge or meter is used for quickly detecting the coating thickness of paint on magnetic metals, such as iron in the automotive sector. One typical use is in detecting damage to car bodies to establish if the car has been in an accident and the resulting value of the car in the used car market.

- Measurement range: 0 ... 2000 µm / 0 ... 79 mils
- Resolution: 0.1 µm (0 to 99.9 µm) / 1 µm ( >100 µm)
- Accuracy: ±1 to 3% or 2.5 µm
- Display: 4 digit LCD, 10 mm in height

Tension Dynamometer PCE-FM 200
US$ 396.00
ex. VAT, ex. delivery costs
The tension dynamometer PCE-FM 200 is a handheld device that measures up to 200 N. The tension dynamometer can determine the units N, kg and lb. The tension dynamometer is supplied with various adapters that have different shapes. The tension dynamometer can measure both tensile and compressive forces.

- Measuring range: 2 ... 200 N / 0.2 ... 20  kg / 0.4 ... 45 lbs
- Measurement accuracy: ±0.5%
- Units: N, KG, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
Thickness Gauge PCE-CT 26
US$ 396.00
ex. VAT, ex. delivery costs

The PCE-CT 26 thickness gauge is used for quickly detecting the coating thickness of paint on magnetic metals, such as iron in the automotive sector. One typical use is in detecting damage to car bodies to establish if the car has been in an accident and the resulting value of the car in the used car market.

- Measurement range: 0 ... 2000 µm / 0 ... 79 mils
- Resolution: 0.1 µm (0 to 99.9 µm) / 1 µm ( >100 µm)
- Accuracy: ± 1 to 3% or 2.5 µm
- Display: 4 digit LCD, 10 mm in height

Vibration Analyzer PCE-VDL 24I 3-Axis
US$ 396.00
ex. VAT, ex. delivery costs
For this vibration analyzer PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Vibration Meter PCE-VDL 24I 3-Axis
US$ 396.00
ex. VAT, ex. delivery costs
For this vibration meter PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- 32 GB SD memory card
- Evaluation software