Metal Hardness Durometer with ISO Certificate PCE-950-ICA
US$ 1,973.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-950-ICA is a handheld metal hardness durometer used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: 2% / Repeatability: 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
- Includes ISO calibration certificate

Metal Hardness Tester with ISO Certificate PCE-950-ICA
US$ 1,973.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-950-ICA is a handheld metal hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: 2% / Repeatability: 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
- Includes ISO calibration certificate

Metal Hardness Tester with ISO Certificate PCE-950-ICA
US$ 1,973.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-950-ICA is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: 2% / Repeatability: 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
- Includes ISO calibration certificate

NDT Test Instruments PCE-950-ICA icl. ISO Certificate
US$ 1,973.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-950-ICA is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.

- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS 
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: 2% / Repeatability: 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
- Includes ISO calibration certificate

Vibration Meter PCE-VM 25
US$ 1,968.00
ex. VAT, ex. delivery costs

The PCE-VM 25 Vibration Meter is designed for engine monitoring to assure a smooth operation of machines. Due to its simple application, the Vibration Meter can be used for the measurement of a large range of parameters including acceleration, velocity and displacement.


- Vibration velocity 10 Hz ... 10 kHz, displacement to 60 mm
- True RMS, Max Hold, peak value
- OLED display
- Measurement memory
- VMID measuring point function

 

Vibration Meter PCE-VM 25
US$ 1,968.00
ex. VAT, ex. delivery costs

The PCE-VM 25 Vibration Meter is designed for engine monitoring to assure a smooth operation of machines. Due to its simple application, the Vibration Meter can be used for the measurement of a large range of parameters including acceleration, velocity and displacement.


- Vibration velocity 10 Hz ... 10 kHz, displacement to 60 mm
- True RMS, Max Hold, peak value
- OLED display
- Measurement memory
- VMID measuring point function

 

Concrete Hardness Tester PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The concrete hardness tester is an analog measuring device to determine concrete strength. The measuring method of the concrete hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete hardness tester. The resulting rebound enables the concrete hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Concrete Rebound Test Hammer PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The concrete rebound test hammer is an analog measuring device to determine concrete strength. The measuring method of the concrete rebound test hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete rebound test hammer. The resulting rebound enables the concrete rebound test hammer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Durometer PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The durometer is an analog measuring device to determine concrete strength. The measuring method of the concrete durometer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the durometer. The resulting rebound enables the durometer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Material Tester PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The material tester is an analog measuring device to determine concrete strength. The measuring method of the material tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the material tester. The resulting rebound enables the material tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
NDT Tester - Hardness Tester PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The NDT tester - hardness tester is an analog measuring device to determine concrete strength. The measuring method of the NDT tester - hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the NDT tester - hardness tester. The resulting rebound enables the NDT tester - hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Roll Hardness Tester PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The roll hardness tester is an analog measuring device to determine concrete strength. The measuring method of the roll hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the roll hardness tester. The resulting rebound enables the roll hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Surface Testing - Concrete Hammer PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs
The surface testing - concrete hammer is an analog measuring device to determine concrete strength. The measuring method of the surface testing - concrete hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the surface testing - concrete hammer. The resulting rebound enables the surface testing - concrete hammer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Automotive Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The automotive tester is a versatile measuring device. This is made possible by the various optional sensors on the automotive tester. Thanks to the surface temperature sensor, the automotive tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Coating Thickness Gauge PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The coating thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the coating thickness gauge. Thanks to the surface temperature sensor, the coating thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Condition Monitoring Surface Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The condition monitoring surface tester is a versatile measuring device. This is made possible by the various optional sensors on the condition monitoring surface tester. Thanks to the surface temperature sensor, the condition monitoring surface tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Material Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The material tester is a versatile measuring device. This is made possible by the various optional sensors on the material tester. Thanks to the surface temperature sensor, the material tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
NDT Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The NDT tester is a versatile measuring device. This is made possible by the various optional sensors on the NDT tester. Thanks to the surface temperature sensor, the NDT tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)