Industrial Measurement Products and Solutions
Order no.: HFX205

This Air Quality Meter is designed to detect formaldehyde in air. The Air Quality Meter shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The formaldehyde Air Quality Meter runs with help of an electromechanical sensor and is designed to determine the current permitted limit.


- Measuring range: 0 … 10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

 

Manufacturer: HAL TECHNOLOGY, LLC
US$ 1,229.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: HFX205

This Formaldehyde Meter HFX205 is designed to detect formaldehyde in air. The Formaldehyde Meter HFX205 shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Formaldehyde Meter HFX205 runs with help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Range Formaldehyde: 0…10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer 

Manufacturer: HAL TECHNOLOGY, LLC
US$ 1,229.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: HFX205

This Gas Leak Detector is designed to detect formaldehyde in air. The Gas Leak Detector shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The formaldehyde Gas Leak Detector runs with help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Measuring range: 0…10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer 

 

Manufacturer: HAL TECHNOLOGY, LLC
US$ 1,229.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 11

The Material Tester PCE-RT 11 is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device.


- Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
- Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range

- Robust Piezoelectric sensor
- Accuracy: ± 15% and Repeatability < 6%
- Built-in rechargeable li-ion battery

 

Manufacturer: PCE Instruments
US$ 1,229.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 11

Profilometer PCE-RT 11 is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device.


- Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
- Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
- Robust Piezoelectric sensor
- Accuracy: ± 15% and Repeatability < 6%
- Built-in rechargeable li-ion battery
Manufacturer: PCE Instruments
US$ 1,229.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 11

The Roughness Tester PCE-RT-11 is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device. The small roughness tester is especially designed for fast measuring of roughness.


- Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
- Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
- Robust Piezoelectric sensor
- Accuracy: ± 15% and Repeatability < 6%
- Built-in rechargeable li-ion battery
Manufacturer: PCE Instruments
US$ 1,229.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RT 11

The Surface Tester PCE-RT-11 is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device. The small roughness tester is especially designed for fast measuring of roughness. The roughness (obsolete: throatiness) is a term of surface physics that describes unevenness of surface height.

- Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
- Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
- Robust Piezoelectric sensor
- Accuracy: ± 15% and Repeatability < 6%
- Built-in rechargeable li-ion battery

Manufacturer: PCE Instruments
US$ 1,229.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 0.5K
The dynamometer PCE-DFG NF 0.5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs
- Resolution: 0.05 N / 0.01 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 1K
The dynamometer PCE-DFG NF 1K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 1 kN / 1,000 N / 225 lbs
- Resolution: 0.1 N / 0.02 lbs
- Accuracy: ±0.5 % of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 2K
The dynamometer PCE-DFG NF 2K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 2 kN / 2,000 N / 450 lbs
- Resolution: 0.2 N / 0.04 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 5K
The dynamometer PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs
- Resolution: 0.5 N / 0.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 0.5K
The force gauge PCE-DFG NF 0.5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs
- Resolution: 0.05 N / 0.01 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 1K

The force gauge PCE-DFG NF 1K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation. 


- Measuring range: 0 ... 1 kN / 1,000 N / 225 lbs
- Resolution: 0.1 N / 0.02 lbs
- Accuracy: ±0.5 % of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 2K
The force gauge PCE-DFG NF 2K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 2 kN / 2,000 N / 450 lbs
- Resolution: 0.2 N / 0.04 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG NF 5K
The force gauge PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs
- Resolution: 0.5 N / 0.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 1,217.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PBM 100
The digital microscope impresses with its diverse application options in teaching and laboratory operations. Due to the technical equipment and high reliability, the digital microscope is particularly well suited to be used in advanced teaching facilities as well as in laboratories.

- Eyepieces: WF 10x wide field eyepieces
- Magnification: 4x, 10x, 40x, 100x
- 4 lenses up to 100x magnification
- LC Display 800 x 600 pixels
- Video output
Manufacturer: PCE Instruments
US$ 1,216.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PBM 100
The inspection camera impresses with its diverse application options in teaching and laboratory operations. Due to the technical equipment and high reliability, the inspection camera is particularly well suited to be used in advanced teaching facilities as well as in laboratories.

- Eyepieces: WF 10x wide field eyepieces
- Magnification: 4x, 10x, 40x, 100x
- 4 lenses up to 100x magnification
- LC Display 800 x 600 pixels
- Video output
Manufacturer: PCE Instruments
US$ 1,216.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SGM 60-ICA

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,211.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SGM 60-ICA

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,211.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SGM 60-ICA
The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,211.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer