The air quality meter has a temperature measuring range of -20 ... 60 °C and a humidity measuring range of 0 ... 99.9% RH. The readings from the air quality meter can be read directly on the 2.3" color display.
Temperature measurement - Measuring range: -20 ... 60 °C / -4 ... 140 °F Humidity measurement - Measuring range: 0 ... 99.9% RH - Data memory for 12800 measuring points - For mounting on the wall - WiFi interface
The air quality meter has a temperature measuring range of -20 ... 60 °C and a humidity measuring range of 0 ... 99.9% RH. The readings from the air quality meter can be read directly on the 2.3" color display.
Temperature measurement - Measuring range: -20 ... 60 °C / -4 ... 140 °F Humidity measurement - Measuring range: 0 ... 99.9% RH - Data memory for 12800 measuring points - For mounting on the wall - WiFi interface - incl. ISO Calibration Certificate
PCE-MPC 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).
- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- 2" full-color LCD with user-friendly graphics
- Integrated data logger with adjustable sampling time
- Internal memory stores up to 5000 date-and-time-stamped data sets
The air quality monitoring particle counter PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the particle collector are 0.3, 2.5 and 10 μm.
- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets
PCE-MPC 10 is a portable handheld air quality particle counting meter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).
- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- 2" full-color LCD with user-friendly graphics
- Integrated data logger with adjustable sampling time
- Internal memory stores up to 5000 date-and-time-stamped data sets
PCE-PCO 1 is a handheld particle-counting air quality meter or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 hygienic dust measuring device:
- Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm - Offers a robust, 80 MB internal memory - Features a large, full-color LCD display with backlight - Includes a built-in camera for image and video recording - Contains sensors for measuring air temperature, dew point and relative humidity - Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)
PCE-PCO 2 is a portable handheld air quality particle counting meter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature, dew point and relative humidity.
- PM channels:PM 2.5, PM 10, including mass concentration mode (µg/m³)
- Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- Built-in camera for image and video recording - Free software download on PCE Software web page
PCE-RCM 10 is a portable handheld air quality particle counting meter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).
The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air quality particle counting is done by an internal pump.
- Real-time measurement from 0.3 μm ... 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement - Real-time display of clean room class ISO 14644-1
The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air quality particle counting is performed by an internal pump.
The air quality station is used for indicative testing of environmental parameters.
The air quality station enables the measurement of CO2, fine dust, temperature and relative humidity.
The bright display of the air quality station provides information about these parameters.
- Fine dust, CO2, formaldehyde, humidity, temperature
The air quality station is used to measure air quality. The air quality meter measures carbon dioxide, temperature and humidity. The CO2 sensor of the air quality station is disconnected from the main unit with a connection cable.
- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% RH
- Measuring range: 0 ... 50 °C / 32 ... 122 °F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
The Air Quality Station is used to measure air quality. The Air Quality Station measures carbon dioxide, temperature and humidity. The CO2 sensor from the Air Quality Station is disconnected from the main unit with a connection cable.
- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
- incl. ISO Calibration Certificate (only for CO2)
The Air Quality Station is an ideal measuring device for monitoring the air quality at workplaces. The health and Air Quality Station is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.
Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
The air quality station is an ideal measuring device for monitoring the air quality at workplaces. The health and environmental air quality station is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.
Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate
The Air Quality Station is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The Air Quality Station is equipped with various sensors.
The air quality station is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The air quality station is equipped with various sensors.
The air quality station is a multi-function meter for measuring the air quality. This Air Quality Station measures synchronously the CO2 concentration, the air temperature and the humidity.
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
