Zum Hauptinhalt springen

HVAC Meter / HVACR Tester PCE-PDA 1L-ICA

HVAC Meter / HVACR Tester PCE-PDA 1L-ICA incl. ISO-Calibration Certificate

Order no.: PCE-PDA 1L-ICA
GTIN (EAN): 4250348700070
979,90 €
price ex. (VAT / delivery)
:
4250348700070
PCE-PDA 1L-ICA
Delivery time:5-7 working days

Description

 PCE-PDA 1L HVAC Meter / HVACR Tester for relative and differential pressure / Pitot tube adaptable to HVAC Meter / HVACR Tester / MAX MIN function / Data logger

The differential HVAC Meter / HVACR Tester of the PCE-PDA series is a reliable differential HVAC Meter / HVACR Tester for pressure measurement of gases in the range of ± 200 Pa, ± 2 kPa, and 20 kPa, depending on the model. The differential HVAC Meter / HVACR Tester has many different pressure measuring functions. This gives the user more than 16 units. Furthermore, the differential HVAC Meter / HVACR Tester measures, in addition to the differential pressure, the temperature, flow velocity, and volume flow. In addition, the maximum and minimum differential pressure can be displayed in the two-part graphic display. The resolution of the differential pressure can optionally be switched. The differential HVAC Meter / HVACR Tester incorporates a high-precision mode that increases the resolution tenfold.

The PCE-PDA differential HVAC Meter / HVACR Tester has a data logger function. This makes it possible to carry out a leak test on pressure lines in addition to the continuous storage of the measured values. In the data logger mode, it is possible to set the differential HVAC Meter / HVACR Tester to a duration during which the data is stored at a previously selected interval. In the leakage measurement mode, the user must specify the measurement duration and the differential pressure level. After the measurement, the differential HVAC Meter / HVACR Tester then displays the deviation from the set point. In addition to these two functions, the differential HVAC Meter / HVACR Tester, with optional Pitot tubes, can determine the flow velocity or volume flow in pipes.


Highlights

- Graphic display with lighting
- Min and Max value memory
- Data logger and leak test
- Quick coupling connection
- Temperature measurement, flow measurement
- High precision measuring mode
- Simple operation (voice-controlled)
- units switchable (Pa, kPa, hPa, ...)
- incl. ISO-Calibration Certificate

Specification

Differential pressure 
Measuring range  -2 ... +2 kPa
Resolution  0,1 Pa
Accuracy  ±0.5 % FS
  
Temperature 
Measuring range  0 ... 50 °C
Resolution  0,1 °C
Accuracy  ±1 °C
  
General technical data 
Measuring functions  MIN, MAX, HOLD, ALARM, Average value
Units  kPa, MPa, Pa, PSF, psi, Torr, inHg, mmHg, inH₂O, cmH₂O, mmH₂O, kg/cm², ATM, bar, mbar, hPa
Connections  5 mm nipple for quick connector
Display type  LCD graphic display with backlight
Display size  3 Inch
Display refresh rate  5 x per second
Measuring rate  10 Hz
Storage medium  Internal memory
Storage capacity  1024 Values
Storage interval from  1 s
Storage interval to  255 h
Interface  Micro-USB
Current consumption meter  50 mA DC
Measured medium  non-explosive gases, Air
Operating time  100 h
Automatic power-off  255 min
Housing  ABS (acrylonitrile-butadiene-styrene copolymers)
Overpressure  10 kPa
Menu language  English, German, English (GB), Czech
Protection class (device)  IP41
Power supply  5 V, 500 mA
Connector type  Device-europlug
(Rechargeable) battery  2 x 1,2 V AA - rechargeable battery , Nickel-metal hydride battery
Capacity  2000 mAh
Operating conditions  0 ... 50 °C , 0 ... 90 % RH
Storage conditions  10 ... 55 °C , 0 ... 80 % RH
Dimensions ( L x W x H )  170 x 100 x 30 mm
Weight  230 g

Delivery Scope

1 x HVAC Meter / HVACR Tester PCE-PDA 1L-ICA
2 x 1.2V AA NiMh batteries
1 x USB power adapter
1 x Micro USB cable
1 x User manual
1 x ISO-Calibration Certificate