The belt tension meter is an optical measuring instrument for determining the belt tension force. This belt tension meter consists of a display unit and a sensor on a gooseneck cable. The belt tension meter measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm

The force gauge / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm

The swimming pool pH meter kit is a very easy to use measuring device for determining the pH value in various liquids. With the help of the BNC connection of the pH meter, various pH electrodes can also be connected to the pH meter. The turbidity meter is a handy meter with a large display that meets all the requirements for on-site turbidity measurement.

- Measuring range: 0.00 ... 14.00 pH
- Measurement accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
- Resolution: 0.01 pH
- Exchangeable electrode through BNC connection
- Device kit for outdoor swimming pools
- Incl. turbidity meter PCE-TUM 20
- Measuring range: 0.00 to 50.0 NTU and 50 to 1000 NTU
- Resolution: 0.01 and 1 NTU

- Pipe sizes: DN 15 ... 100 / 20 ... 108 mm / 0.6 ... 3.9 / 0.7 ... 4.2"

- Important! If you order the sensor at a later date, we require the PCE-TDS 200 hand-held unit,
   in order to match the sensor to the hand-held unit!

The pressure transmitter PCE-DMU 40 can be used for relative and absolute pressure measurements. The pressure transmitter can be used for gases, water as well as fuels and oils.

 

- max. 600 Bar
- Media: gases, water as well as fuels and oil
- Output: 4 ... 20 mA / 0 ... 10 V (selectable)
- Pressure type: Absolute or Relative (selectable)
- Membrane: stainless steel
- Accuracy: 0.1 % / 0.25 % FSO

The robust checkweighing scale is a real all-rounder. The stand of the checkweighing scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate

The robust checkweighing scale is a real all-rounder. The stand of the checkweighing scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

 

- Weighing range: 15/30 kg
- Readability: 2/5 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate

 

The robust counting scales is a real all-rounder. The stand of the counting scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate

The robust counting scales is a real all-rounder. The stand of the counting scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 15/30 kg
- Readability: 2/5 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate

The robust industrial scales is a real all-rounder. The stand of the industrial scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate

The robust industrial scales is a real all-rounder. The stand of the industrial scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

 

- Weighing range: 15/30 kg
- Readability: 2/5 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate

 

The robust inventory scales is a real all-rounder. The stand of the inventory scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate

The robust inventory scales is a real all-rounder. The stand of the inventory scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

 

- Weighing range: 15/30 kg
- Readability: 2/5 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate

 

The robust LAB scale is a real all-rounder. The stand of the LAB scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate

The robust LAB scale is a real all-rounder. The stand of the LAB scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 15/30 kg
- Readability: 2/5 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Incl. ISO calibration certificate