PCE-VDL MNT optional magnetic mounting plate for PCE-VDL 16I and PCE-VDL 24I logger

The temperature indicator is used for the signal processing of  4…20 mA. The temperature indicator offers a wide field of application due to the fact that its signal can be freely scaled. The temperature indicator has a 5-digit LED display to allow the user to directly read current measured values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The power indicator is used for the signal processing of 4 .. 20 mA. The power indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The digital panel meter is used for processing signals coming from temperature sensors. Depending on your specific needs, the panel meter can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the panel meter is freely scalable, which increases its application possibilities.

• IP65 protected front
• For thermocouples and resistance thermometers
• Configuration via software
• 5-digit LED display

The frequency indicator is used for the signal processing of 4 .. 20 mA. The frequency indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The panel indicator is used for the signal processing of 4 .. 20 mA. The panel indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The pressure indicator is used for the signal processing of 4 .. 20 mA. The pressure indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The voltage indicator is used for the signal processing of 4 .. 20 mA. The voltage indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The process indicator is used for the signal processing of 4 .. 20 mA. The process indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The frequency indicator is used to display AC parameters. The frequency indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this frequency indicator.

• Power supply:   230V, 110V, 24V, 20 … 40V AC/DC,   85 … 253 V AC/DC (selectable)
• Input signal:   1 … 100V, 2.5 … 250V, 4 … 400V,   20 … 500 Hz, 1 A, 5 A (selectable)
• Display: 4 digits, red
• Digit height: 20 mm / 0.78"

The digital temperature indicator is used for processing signals coming from temperature sensors. Depending on your specific needs, the temperature indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the temperature indicator is freely scalable, which increases its application possibilities.

• IP65 protected front
• For thermocouples and resistance thermometers
• Configuration via software
• 5-digit LED display

The voltage indicator is used to display AC parameters. The voltage indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this voltage indicator.

• Power supply:   230V, 110V, 24V, 20 … 40V AC/DC,   85 … 253 V AC/DC (selectable)
• Input signal:   1 … 100V, 2.5 … 250V, 4 … 400V,   20 … 500 Hz, 1 A, 5 A (selectable)
• Display: 4 digits, red
• Digit height: 20 mm / 0.78"

The panel meter is used for the signal processing of 4 .. 20 mA. The panel meter has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The PCE-HT 71N Hygrometer detects air temperature and humidity and stores readings in its internal memory. The Hygrometer has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

• Measurement range: 0 … 100% RH / -35 … 70°C / -31 … 176°F
• Accuracy: ± 3% RH (20 … 80%) and  ± 5% / ± 1°C (1.8°F)
• Resolution: 0.5% RH / 0.1°C (0.18°F)
• Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

• magnification: 400 ... 800x
• USB-C interface
• resolution: image: JPG 2 MP / video: 720 pixels
• 6 adjustable LEDs
• image and video recording
• 22 menu languages