• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This accelerometer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

• Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Colored graphic display
• Incl. ISO calibration certificate

 The condition monitoring vibration meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This condition monitoring vibration meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

• Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Colored graphic display
• Incl. ISO calibration certificate

The HVAC meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This HVAC meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

• Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Colored graphic display
• Incl. ISO calibration certificate

The vibration analyzer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration analyzer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

• Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Colored graphic display
• Incl. ISO calibration certificate

The 1-Phase-Power Meter PCE-GPA 62 (Graphic Power Quality Analyzer) with network analyzer / power and energy meter with data logger. The one-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

The Xgard-1-CO is a single-gas Carbon Monoxide Meter used to warn for gases (Carbon Monoxide, CO, 0 … 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Carbon Monoxide, CO, 0 … 250 ppm)
• Additional display and alarm station
• ATEX or UL approval

Three-Phase Clamp Meter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

Clamp on Tester with network Analyzer / Clamp on Tester with data logger. The Clamp on Tester (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50? of the harmonic waveform. As all test instruments, the Clamp on Tester is delivered manufacturer calibrated (ISO certification is available optional).

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

The Three-Phase Current Clamp (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

The Xgard-1-CO is a single-gas gas detector used to warn for gases (Carbon Monoxide, CO, 0 … 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Carbon Monoxide, CO, 0 … 250 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 … 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Hydrogen sulfide, H₂S, 0 … 25 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-CO is a single-gas Gas Leak Detector used to warn for gases (Carbon Monoxide, CO, 0 … 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Carbon Monoxide, CO, 0 … 250 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 … 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Hydrogen sulfide, H₂S, 0 … 25 ppm)
• Additional display and alarm station
• ATEX or UL approval

HVAC Meter with network Analyzer / Clamp on Tester with data logger.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

Multimeter / TRMS Multimeter with network analyzer / power and energy meter with data logger.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

This Portable Power Analyzer is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The Portable Power Analyzer clamp is equipped with data logger. The test instrument is delivered manufacurer calibrated (ISO or certification as an option).

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

This power analyzer is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The power analyzer clamp is equipped with data logger. The test instrument is delivered manufacurer calibrated (ISO or certification as an option).

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

The power data logger (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

The Power Meter PCE-GPA 62 (Graphic Power Quality Analyzer) with network analyzer / power and energy meter with data logger. The one-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records