Products for 'Analisador de potência PCE PA 6500 R11 '

Condition Monitoring Thermometer PCE-894

724,90 €

Price excl. VAT &. delivery

The condition monitoring thermometer with double laser has a temperature range of -50 … 1850°C / -58 … 3362°F. The condition monitoring thermometer has an optical resolution of 50: 1 and enables a precise, non-contact temperature measurement of very small areas.

Temperature range from -50 … 1850°C / -58 … 3362°F
Adjustable emissivity
Short response time of 150 ms
With thermocouple input
Bluetooth interface

Condition Monitoring Sound Meter PCE-ISM 10ILEQ

691,90 €

Price excl. VAT &. delivery

Our Condition Monitoring Sound Meter is specially designed to precisely detect and measure short, pulse-like noises such as explosions, blows or bangs. The Condition Monitoring Sound Meter records sound levels within a range from 20 to 130 dB, with three manual measurement ranges available.

measurement range: 20 ... 130 dB
resolution: 0.1 dB
accuracy: ±1.5 dB
measurement functions: HOLD, MAX, LEQ
time weighting: F, S and I
frequency weighting: A, C and Z
frequency range: 20 ... 8000 Hz
standards: IEC 61672-1 (class II)

Condition Monitoring Stroboscope PCE-LES 308

679,90 €

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz. The Condition Monitoring Stroboscope is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Condition Monitoring 3-Axis Vibration Meter PCE-VM 10

769,90 €

Price excl. VAT &. delivery

The Condition Monitoring 3-Axis Vibration Meter enables fast and precise measurement of acceleration, vibration displacement and vibration velocity in three directions (X, Y, Z) or for a single axis. The ISO 2954 Condition Monitoring 3-Axis Vibration Meter is used to detect unbalance, misalignment and mechanical faults in rotating machinery and is ideal for quality control, commissioning and predictive maintenance on site.

3-axis sensor
Frequency range: 10 Hz ... 10 kHz
Acceleration: 0.1 ... 400 m/s²
Resolution: 0.1 m/s²
Velocity: 0.01 ... 400 mm/s
Resolution: 0.01 mm/s
Displacement: 0.001 ... 4 mm
Resolution: 0.001 mm
Accuracy: 5% v.Mw. +2 digits
Three display options

Condition Monitoring Data Logging Device PCE-NDL 10

744,90 €

Price excl. VAT &. delivery

The condition monitoring data logging device is used to determine volume. The condition monitoring data logging device is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the condition monitoring data logging device. In addition, the condition monitoring data logging device has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

Condition Monitoring PCE-BTM 1000-ICA incl. ISO-Calibration Certificate

698,90 €

Price excl. VAT &. delivery

The Condition Monitoring is used to precisely check the tension of belts in machines and systems, thereby ensuring optimum power transmission. This Condition Monitoring measures the vibration frequency of the belt and immediately calculates the belt tension, which is displayed directly in newtons.

Measurement of the vibration frequency of the belt
Measuring range: 10 ... 680 Hz
Accuracy: ± 1 Hz (< 100 Hz) / ± 1 % (≥ 100 Hz)
Length of gooseneck sensor 115 mm
Max. belt width: 999.9 mm
Max. belt mass: 999.9 g/m
Acoustic measurement
incl. ISO-Calibration Certificate

Condition Monitoring PCE-ISM 5-ICA incl. ISO-Calibration Certificate

698,90 €

Price excl. VAT &. delivery

Our Condition Monitoring is a versatile device that measures and evaluates the sound level time-dependently. The Condition Monitoring records and visualises sound levels within a range from 20 to 130 dB in three manual measurement ranges with a resolution of 0.1 dB.

measurement range: 20 ... 130 dB
accuracy: ±1.5 dB
time weighting: F, S and I
frequency range: 20 ... 8000 Hz
frequency weighting: A, C and Z
measuring function: HOLD
battery and mains operation
standards: IEC 61672-1 (Class II)
incl. ISO-Calibration Certificate

Condition Monitoring Industrial Borescope PCE-VE 200-S3

644,90 €

Price excl. VAT &. delivery

The PCE-VE 200-S3 is a condition monitoring industrial borescope, a borescope camera or engine borescope for the non-destructive evaluation (NDE) of engines, machines and more. This condition monitoring industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head of this kind of borescope features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.

3.7 mm / 0.14 in diameter
3 m / 9.8 ft cable length
1600 x 1200 pixels JPEG image / 640 x 480 pixels AVI video

Condition Monitoring Ultrasonic Material Thickness Meter PCE-TG 150A-ICA incl. ISO calibration certificate

729,90 €

Price excl. VAT &. delivery

The Condition Monitoring Ultrasonic Material Thickness Meter can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the Condition Monitoring Ultrasonic Material Thickness Meter.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Condition Monitoring Stroboscope PCE-LES 103UV-365-CTA-KIT

649,90 €

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our UV Condition Monitoring Stroboscope. The UV Condition Monitoring Stroboscope is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 202 μW/cm² at a distance of 30 cm. The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz. And it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.

3 UVA high-performance LEDs
light colour: 365 ... 370 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
incl. crack detection agent 2-component paint spray

Condition Monitoring Belt Tension Meter PCE-BTM 2000L-ICA incl. ISO Cal. Cert.

729,90 €

Price excl. VAT &. delivery

The Condition Monitoring Belt Tension Meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The Condition Monitoring Belt Tension Meter measures the tension of the belt in a stationary state.

Measures the oscillation frequency of the belt
Measuring range: 10 … 900 Hz
Accuracy: ± (1% of rdg. + 4 digits)
Resolution: <100 Hz: 0.1 Hz >100 Hz: 1 Hz
Memory for 750 measured values
Length of gooseneck sensor 25 cm / 9,8 in
incl. ISO Calibration Certificate

Condition Monitoring PCE-TG 150A F25-ICA incl. ISO-Calibration Certificate

739,90 €

Price excl. VAT &. delivery

The Condition Monitoring can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to save the corresponding sound velocity in the Condition Monitoring.

Measurement range: 1.20 ... 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Rd. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 ... 60 °C
Thickness measurement of cast materials
incl. ISO-Calibration Certificate

Condition Monitoring Belt Tension Meter PCE-BTM 2000A-ICA incl. ISO Cal. Cert.

699,90 €

Price excl. VAT &. delivery

The Condition Monitoring Belt Tension Meter is an optical measuring instrument for determining the belt tension force. This Condition Monitoring Belt Tension Meter consists of a display unit and a sensor on a gooseneck cable. The Condition Monitoring Belt Tension Meter measures the tension of the belt in a stationary state.

Measures the oscillation frequency of the belt
Measuring range: 10 … 900 Hz
Accuracy: ± (1% of rdg. + 4 digits)
Resolution: <100 Hz: 0.1 Hz >100 Hz: 1 Hz
Memory for 750 measured values
Length of gooseneck sensor 16 cm
incl. ISO Calibration Certificate

Condition Monitoring Material Thickness Meter PCE-TG 150 F2.5-ICA Certificate

715,90 €

Price excl. VAT &. delivery

The condition monitoring material thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the condition monitoring material thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

Condition Monitoring Stroboscope PCE-LES 108-ICA incl. ISO-Calibration Certificate

699,90 €

Price excl. VAT &. delivery

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
incl. ISO-Calibration Certificate

Condition Monitoring Stroboscope PCE-LES 108UV-365-ICA incl. ISO-Calibration Certificate

729,90 €

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 365 ... 370 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
incl. ISO-Calibration Certificate

Condition Monitoring Stroboscope PCE-LES 108UV-385-ICA incl. ISO-Calibration Certificate

705,90 €

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
incl. ISO-Calibration Certificate

Condition Monitoring Sound Level Meter PCE-SLT-ICA incl. ISO Calibration Cert.

674,90 €

Price excl. VAT &. delivery

The Condition Monitoring Sound Level Meter consists of a measuring microphone with handle and a wall bracket with 1.5 m / 4.9 ft cable, a noise transmitter and a digital display. The main field of application of the noise measuring device is the continuous noise measurement and noise monitoring of factory buildings, production areas and major events such as night clubs, music festivals or karting tracks.

Range : 30 … 130dB (A)
Resolution: 0.1dB
Accuracy: ± 1.5dB
Alarm relay: 5A / 240VAC
Supply: 250V / 50Hz
Handle and wall mount
Analogue output signal
Incl. ISO calibration certificate

Condition Monitoring Stroboscope PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate

665,90 €

Price excl. VAT &. delivery

Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm.

3 UVA high-performance LEDs
light colour: 365 ... 370 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate