Zum Hauptinhalt springen
Air Quality Station PCE-RCM 11
356,90 €
Price excl. VAT &. delivery
The Air Quality Station PCE-RCM 11 serves as an indicative test of environmental parameters. The Air Quality Station PCE-RCM 11 enables the measurement of fine dust, temperature and relative humidity. The bright display of the Air Quality Station provides information about the already mentioned parameters. 

  • Fine dust, formaldehyde, humidity, temperature, TVOC
  • Particle size channels : PM 2.5 / PM 10
  • Measuring range TVOC: 0.00 … 9.99 mg / m³ (volatile organic compounds)
  • Measuring range temperature: -20 … 70°C / -4 … 158°F
  • Measuring range humidity: 0 … 100% RH
  • Measuring range formaldehyde: 0.00 … 5.00 mg / m³
  • Interface: USB
  • For indicative measurements
Air Quality Station PCE-CMM 10-ICA incl. ISO Calibration Certificate
361,90 €
Price excl. VAT &. delivery

The Air Quality Station is a multi-function meter for measuring the air quality. This Air Quality Station measures synchronously the CO2 concentration, the air temperature and the humidity.

  • Measuring range CO2: 400 … 5000 ppm
  • Measuring range temperature: -10.0 … 50.0°C / 14 … 122°F
  • Measuring range humidity: 0 … 99% rh
  • Battery operation
  • Limit exceeded
  • Beep
  • incl. ISO Calibration Certificate (for CO2 only)

Voltmeter PCE-ITM 20
384,90 €
Price excl. VAT &. delivery
This voltmeter combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this voltmeter is also equipped with a frequency and capacitance measurement.
  • Automatic range selection
  • Capacitance measurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000 V, CAT IV 600 V
  • Frequency measurement
Voltmeter PCE-ITM 20
384,90 €
Price excl. VAT &. delivery
This Voltmeter PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this Voltmeter PCE-ITM 20 is also equipped with a frequency and capacitance measurement.
  • Automatic range selection
  • Capacitancemeasurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000V, CAT IV 600V
  • Frequency measurement
Photometer PCE-CP 20
349,90 €
Price excl. VAT &. delivery
The multi-parameter photometer PCE-CP 20 is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

  • Bluetooth connection with app
  • 503 nm / 570 nm / 620 nm LED
  • Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)Parameters:
  • Alkalinity
  • Chlorine free
  • Chlorine total
  • Cyanuric acid
  • pH
  • Total hardness
  • Calcium hardness
Photovoltaic Tester PCE-ITM 20
384,90 €
Price excl. VAT &. delivery
This digital Photovoltaic Tester combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this digital Photovoltaic Tester is also equipped with a frequency and capacitance measurement.

  • Automatic range selection
  • Capacitance measurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000V, CAT IV 600V
  • Frequency measurement
Digital Multimeter PCE-ITM 20
384,90 €
Price excl. VAT &. delivery
This digital multimeter PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this digital multimeter PCE-ITM 20 is also equipped with a frequency and capacitance measurement.
  • Automatic range selection
  • Capacitancemeasurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000V, CAT IV 600V
  • Frequency measurement
Isolation Meter PCE-ITM 20
384,90 €
Price excl. VAT &. delivery
This isolation meter PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this isolation meter PCE-ITM 20 is also equipped with a frequency and capacitance measurement.
  • Automatic range selection
  • Capacitance measurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000 V, CAT IV 600 V
  • Frequency measurement
Photovoltaic Meter PCE-ITM 20
384,90 €
Price excl. VAT &. delivery
This digital Photovoltaic Meter PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this digital Photovoltaic Meter PCE-ITM 20 is also equipped with a frequency and capacitance measurement.
  • Automatic range selection
  • Capacitance measurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000V, CAT IV 600V
  • Frequency measurement
Insulation Tester PCE-ITM 20
384,90 €
Price excl. VAT &. delivery
This Insulation Tester PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this insulation tester PCE-ITM 20 is also equipped with a frequency and capacitance measurement.
  • Automatic range selection
  • Capacitance measurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000V, CAT IV 600V
  • Frequency measurement
PAT Tester PCE-ITM 20
384,90 €
Price excl. VAT &. delivery
This PAT Tester combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this PAT Tester is also equipped with a frequency and capacitance measurement.
  • Automatic range selection
  • Capacitance measurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000V, CAT IV 600V
  • Frequency measurement
Electrical Tester PCE-ITM 20
384,90 €
Price excl. VAT &. delivery
This digital electrical tester PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this digital electrical tester PCE-ITM 20 is also equipped with a frequency and capacitance measurement.
  • Automatic range selection
  • Capacitance measurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000V, CAT IV 600V
  • Frequency measurement
Water Analysis Meter PCE-CP 20
349,90 €
Price excl. VAT &. delivery
The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter water analysis meter. With this multi-parameter water analysis meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

  • Adjustable units: mg / l, ppm
  • Bluetooth connection with app
  • 503 nm / 570 nm / 620 nm LED
  • Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
  • Up to 7 selectable parameters
Water Hardness Tester PCE-CP 20
349,90 €
Price excl. VAT &. delivery
The multi-parameter water hardness tester is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter water hardness tester. With this multi-parameter water hardness tester, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

  • Bluetooth connection with app
  • 503 nm / 570 nm / 620 nm LED
  • Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)Parameters:
  • Alkalinity
  • Chlorine free
  • Chlorine total
  • Cyanuric acid
  • pH
  • Total hardness
  • Calcium hardness
IoT Sensor PCE-CP 20
349,90 €
Price excl. VAT &. delivery
The multi-parameter IoT sensor is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter IoT sensor. With this multi-parameter IoT sensor, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

  • Bluetooth connection with app
  • 503 nm / 570 nm / 620 nm LED
  • Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)Parameters:
  • Alkalinity
  • Chlorine free
  • Chlorine total
  • Cyanuric acid
  • pH
  • Total hardness
  • Calcium hardness
pH Meter PCE-CP 20
349,90 €
Price excl. VAT &. delivery
The multi-parameter pH meter is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter pH meter. With this multi-parameter pH meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

  • Bluetooth connection with app
  • 503 nm / 570 nm / 620 nm LED
  • Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)Parameters:
  • Alkalinity
  • Chlorine free
  • Chlorine total
  • Cyanuric acid
  • pH
  • Total hardness
  • Calcium hardness
Cable Locator PCE-CLT 20-ICA incl. ISO calibration certificate
359,90 €
Price excl. VAT &. delivery
The cable fault meter represents a powerful and versatile measuring instrument specifically designed for the precise measurement of electrical cables and conductors. With an impressive measurement range from 0.1 meters to an astonishing 30 kilometers, this device can measure and display cable lengths. Since the cable fault meter determines length based on conductor resistance, it can also measure resistance from 0.1 mΩ to 1999.9 Ω. 

  • Cable Length: 0.1 m … 30 km
  • Standard Cable Types: Selectable from 0.15 … 240 mm²
  • Units in meters, kilometers, and feet
  • 8 memory slots for custom cable types
  • Copper and aluminum cables
  • Resistance: 0.1 mΩ … 1999.9 Ω
  • incl. ISO calibration certificate
Electrical Tester PCE-CLT 20-ICA incl. ISO calibration certificate
359,90 €
Price excl. VAT &. delivery
The electrical tester represents a powerful and versatile measuring instrument specifically designed for the precise measurement of electrical cables and conductors. With an impressive measurement range from 0.1 meters to an astonishing 30 kilometers, this device can measure and display cable lengths. Since the electrical tester determines length based on conductor resistance, it can also measure resistance from 0.1 mΩ to 1999.9 Ω. 

  • Cable Length: 0.1 m … 30 km
  • Standard Cable Types: Selectable from 0.15 … 240 mm²
  • Units in meters, kilometers, and feet
  • 8 memory slots for custom cable types
  • Copper and aluminum cables
  • Resistance: 0.1 mΩ … 1999.9 Ω
  • incl. ISO calibration certificate
Milliohmmeter PCE-CLT 20-ICA incl. ISO calibration certificate
359,90 €
Price excl. VAT &. delivery
The Milliohmmeter represents a powerful and versatile measuring instrument specifically designed for the precise measurement of electrical cables and conductors. With an impressive measurement range from 0.1 meters to an astonishing 30 kilometers, this device can measure and display cable lengths. Since the Milliohmmeter determines length based on conductor resistance, it can also measure resistance from 0.1 mΩ to 1999.9 Ω. 

  • Cable Length: 0.1 m … 30 km
  • Standard Cable Types: Selectable from 0.15 … 240 mm²
  • Units in meters, kilometers, and feet
  • 8 memory slots for custom cable types
  • Copper and aluminum cables
  • Resistance: 0.1 mΩ … 1999.9 Ω
  • incl. ISO calibration certificate
Cable Fault Meter PCE-CLT 20-ICA incl. ISO calibration certificate
359,90 €
Price excl. VAT &. delivery
The cable fault meter represents a powerful and versatile measuring instrument specifically designed for the precise measurement of electrical cables and conductors. With an impressive measurement range from 0.1 meters to an astonishing 30 kilometers, this device can measure and display cable lengths. Since the cable fault meter determines length based on conductor resistance, it can also measure resistance from 0.1 mΩ to 1999.9 Ω. 

  • Cable Length: 0.1 m … 30 km
  • Standard Cable Types: Selectable from 0.15 … 240 mm²
  • Units in meters, kilometers, and feet
  • 8 memory slots for custom cable types
  • Copper and aluminum cables
  • Resistance: 0.1 mΩ … 1999.9 Ω
  • incl. ISO calibration certificate
UV Meter / UV Tester PCE-CLT 20-ICA incl. ISO-Calibration Certificate
359,90 €
Price excl. VAT &. delivery
The UV Meter / UV Tester represents a powerful and versatile measuring instrument specifically designed for the precise measurement of electrical cables and conductors. With an impressive measurement range from 0.1 meters to an astonishing 30 kilometers, this device can measure and display cable lengths. Since the UV Meter / UV Tester determines length based on conductor resistance, it can also measure resistance from 0.1 mΩ to 1999.9 Ω.

  • Cable Length: 0.1 m … 30 km
  • Standard Cable Types: Selectable from 0.15 … 240 mm²
  • Units in meters, kilometers, and feet
  • 8 memory slots for custom cable types
  • Copper and aluminum cables
  • Resistance: 0.1 mΩ … 1999.9 Ω
  • incl. ISO-Calibration Certificate
Electric Vehicle EVSE Tester PCE-EVSE 310+
394,90 €
Price excl. VAT &. delivery
The electric vehicle EVSE tester is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

  • PE pre-test
  • Proximity-Pilot PP / Control-Pilot CP
  • Simulation CP error "E" / PE error
  • Mains socket for measuring purposes
  • Safety measuring sockets
  • incl. type 2 plug and adapter to type 1
Anemometer PCE-EM 890
329,90 €
Price excl. VAT &. delivery
The anemometer PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this anemometer is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
  • Humidity / temperature
  • UV
  • Air pressure
  • Volume flow
  • Dew point
  • Wet bulb temperature
  • Windchill
  • Heat stress index
  • Height above sea level
  • External temperature over Pt1000
Air Velocity Meter PCE-EM 890
329,90 €
Price excl. VAT &. delivery
The air velocity meter PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this air velocity meter is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
  • Humidity / temperature
  • UV
  • Air pressure
  • Volume flow
  • Dew point
  • Wet bulb temperature
  • Windchill
  • Heat stress index
  • Height above sea level
  • External temperature over Pt1000
Electric Vehicle EVSE Tester PCE-EVSE 310
339,90 €
Price excl. VAT &. delivery
The electric vehicle EVSE tester is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

  • PE pre-test
  • Proximity Pilot PP / Control Pilot CP
  • Simulation CP fault "E" / PE fault
  • Mains socket for measuring purposes
  • Safety measuring sockets
  • Optional adapter to type 1
Environmental Tester PCE-PH20P
349,90 €
Price excl. VAT &. delivery

Measurement of pH in cosmetics with an environmental tester is a priority test that should be carried out not only to ensure the conformity of the pH of the product with the pH of the skin, but also to ensure good quality, suitable viscosity, colour, scent and to ensure the shelf life of the cosmetics.

  • Measuring range: 0.00 … 14.00 pH
  • Resolution: 0.01 pH
  • Waterproof (IP 67)
  • Data-Hold function
  • Calibration: automatic, pH 4, 7, or 10
  • Applications: Shampoo, pastes, paints, cosmetics

Environmental Tester PCE-EM 890
329,90 €
Price excl. VAT &. delivery
The environmental tester PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this environmental tester is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
  • Humidity / temperature
  • UV
  • Air pressure
  • Volume flow
  • Dew point
  • Wet bulb temperature
  • Windchill
  • Heat stress index
  • Height above sea level
  • External temperature over Pt1000
Air Flow Meter PCE-EM 890
329,90 €
Price excl. VAT &. delivery
The air flow meter PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this air flow meter is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
  • Humidity / temperature
  • UV
  • Air pressure
  • Volume flow
  • Dew point
  • Wet bulb temperature
  • Windchill
  • Heat stress index
  • Height above sea level
  • External temperature over Pt1000
Wind Speed Meter PCE-EM 890
329,90 €
Price excl. VAT &. delivery
The wind speed meter PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this wind speed meter is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
  • Humidity / temperature
  • UV
  • Air pressure
  • Volume flow
  • Dew point
  • Wet bulb temperature
  • Windchill
  • Heat stress index
  • Height above sea level
  • External temperature over Pt1000
UV Meter / UV Tester PCE-EM 890
329,90 €
Price excl. VAT &. delivery
The UV Meter / UV Tester  is an instrument for measuring environmental conditions. Thus, this UV Meter / UV Tester is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
  • Humidity / temperature
  • UV
  • Air pressure
  • Volume flow
  • Dew point
  • Wet bulb temperature
  • Windchill
  • Heat stress index
  • Height above sea level
  • External temperature over Pt1000
UV measuring device / UV Light Meter PCE-EM 890
329,90 €
Price excl. VAT &. delivery
The UV measuring device / UV Light Meter PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this UV measuring device / UV Light Meter is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
  • Humidity / temperature
  • UV
  • Air pressure
  • Volume flow
  • Dew point
  • Wet bulb temperature
  • Windchill
  • Heat stress index
  • Height above sea level
  • External temperature over Pt1000
Climate Meter PCE-EM 890
329,90 €
Price excl. VAT &. delivery
The Climate Meter PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this climate meter is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
  • Humidity / temperature
  • UV
  • Air pressure
  • Volume flow
  • Dew point
  • Wet bulb temperature
  • Windchill
  • Heat stress index
  • Height above sea level
  • External temperature over Pt1000
Wind Measurer PCE-EM 890
329,90 €
Price excl. VAT &. delivery
The wind measurer PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this wind measurer is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
  • Humidity / temperature
  • UV
  • Air pressure
  • Volume flow
  • Dew point
  • Wet bulb temperature
  • Windchill
  • Heat stress index
  • Height above sea level
  • External temperature over Pt1000
HVAC Meter PCE-EM 890
329,90 €
Price excl. VAT &. delivery
The HVAC Meter PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this HVAC meter is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
  • Humidity / temperature
  • UV
  • Air pressure
  • Volume flow
  • Dew point
  • Wet bulb temperature
  • Windchill
  • Heat stress index
  • Height above sea level
  • External temperature over Pt1000
Environmental Meter PCE-EM 890
329,90 €
Price excl. VAT &. delivery
The environmental meter is an instrument for measuring environmental conditions. Thus, this environmental meter is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
  • Humidity / temperature
  • UV
  • Air pressure
  • Volume flow
  • Dew point
  • Wet bulb temperature
  • Windchill
  • Heat stress index
  • Height above sea level
  • External temperature over Pt1000
Environmental Tester PCE-RCM 11
356,90 €
Price excl. VAT &. delivery
The environmental tester PCE-RCM 11 serves as an indicative test of environmental parameters. The environmental tester PCE-RCM 11 enables the measurement of fine dust, temperature and relative humidity. The bright display of the environmental tester provides information about the already mentioned parameters. 

  • Fine dust, formaldehyde, humidity, temperature, TVOC
  • Particle size channels : PM 2.5 / PM 10
  • Measuring range TVOC: 0.00 … 9.99 mg / m³ (volatile organic compounds)
  • Measuring range temperature: -20 … 70°C / -4 … 158°F
  • Measuring range humidity: 0 … 100% RH
  • Measuring range formaldehyde: 0.00 … 5.00 mg / m³
  • Interface: USB
  • For indicative measurements