NDT Test Instruments PCE-VE 355N3
2.284,90 €
Price excl. VAT &. delivery

The NDT test instrument PCE-VE 355N3 is a two-way articulating videoscope, inspection camera, industrial endoscope or borescope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


  • 2-way camera probe
  • Diameter camera head: Ø 4.5mm / 0.18"
  • Interface: Mini-USB 1.1 und AV out/in
  • Memory: 8 GB SD memory card (incl.)
  • Cable length: 3 m /  9ft 10"

Data Logger / Data Logging Instrument PCE-SLM 50
2.494,90 €
Price excl. VAT &. delivery
The Data Logger / Data Logging Instrument is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Data Logger / Data Logging Instrument also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

  • Measuring range: 21 ... 143 dBA
  • Resolution: 0.1 dB
  • Class 1 accuracy IEC61672-1:2013
  • Frequency range: 10 Hz ... 20 kHz
  • Frequency weighting: A, C, Z
  • Time weighting: S, F, I
  • Ethernet, WiFi, USB Type-C
  • Internal memory: 8 GB
  • External SD card support: 32 GB / 64 GB
  • Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
  • 4-inch TFT touch display
  • PC software
Data Logger / Data Logging Instrument PCE-SLM 50-ICA incl. ISO-Calibration Certificate
2.589,90 €
Price excl. VAT &. delivery
ISO Calibration
The Data Logger / Data Logging Instrument is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Data Logger / Data Logging Instrument also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

  • Measuring range: 21 ... 143 dBA
  • Resolution: 0.1 dB
  • Class 1 accuracy IEC61672-1:2013
  • Frequency range: 10 Hz ... 20 kHz
  • Frequency weighting: A, C, Z
  • Time weighting: S, F, I
  • Ethernet, WiFi, USB Type-C
  • Internal memory: 8 GB
  • External SD card support: 32 GB / 64 GB
  • Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
  • 4-inch TFT touch display
  • PC software
  • incl. ISO-Calibration Certificate
NDT Test Instruments PCE-IGM 100-ICA incl. ISO calibration certificate
2.552,90 €
Price excl. VAT &. delivery
ISO Calibration

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.


  • Measuring geometries: 20° / 60° / 85°
  • Measuring range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Clamp Meter PCE-830-2
2.699,90 €
Price excl. VAT &. delivery

The PCE-830-2 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


  • PCE-830 + PCE-6802 amp clamp (1000 A)
  • Electrical conductor pick-up: 55 mm / 2.1 in diameter
  • Range selection: manual (10 A, 100 A, 1000 A)
  • Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
  • Sampling rate: 2 sec.
  • Memory size: 512 kB (max. 52,000 values (single phase)

Clamp on Tester PCE-830-2
2.699,90 €
Price excl. VAT &. delivery

The PCE-830-2 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp on Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


  • PCE-830 + PCE-6802 amp clamp (1000 A)
  • Electrical conductor pick-up: 55 mm / 2.1 in diameter
  • Range selection: manual (10 A, 100 A, 1000 A)
  • Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
  • Sampling rate: 2 sec.
  • Memory size: 512 kB (max. 52,000 values (single phase)

Data Logger PCE-830-2
2.699,90 €
Price excl. VAT &. delivery

The PCE-830-2 Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logger also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


  • PCE-830 + PCE-6802 amp clamp (1000 A)
  • Electrical conductor pick-up: 55 mm / 2.1 in diameter
  • Range selection: manual (10 A, 100 A, 1000 A)
  • Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
  • Sampling rate: 2 sec.
  • Memory size: 512 kB (max. 52,000 values (single phase)

Power Meter PCE-830-2
2.699,90 €
Price excl. VAT &. delivery

The PCE-830-2 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


  • PCE-830 + PCE-6802 amp clamp (1000 A)
  • Electrical conductor pick-up: 55 mm / 2.1 in diameter
  • Range selection: manual (10 A, 100 A, 1000 A)
  • Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
  • Sampling rate: 2 sec.
  • Memory size: 512 kB (max. 52,000 values (single phase)

Electrical Tester PCE-830-2
2.699,90 €
Price excl. VAT &. delivery

The PCE-830-2 Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


  • PCE-830 + PCE-6802 amp clamp (1000 A)
  • Electrical conductor pick-up: 55 mm / 2.1 in diameter
  • Range selection: manual (10 A, 100 A, 1000 A)
  • Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
  • Sampling rate: 2 sec.
  • Memory size: 512 kB (max. 52,000 values (single phase)