The PCE-CRM 40 is a portable handheld photometer or spectrophotometer used to accurately measure the correlated color temperature (CCT - in Kelvin), illuminance, chromaticity, excitation purity (Pe), luminous flux (in lumens - lm), RGB and dominant wavelength of light sources such as LED, organic LED (OLED) and other forms of organic electroluminescence (EL).

• Measuring range: 0.1 … 150,000 lux / 0.01 … 15,000 foot-candle
• Spectral wavelength range: 360 … 780 nm
• Display: 3.2" colour LCD
• Chromaticity: Ev xy, Ev u'v'

The weighbridge is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated weighbridge are the standard EU size (1200 x 800 mm).

• Weighing range: 0 … 1500 kg
• Readability: 0.5 kg
• Calibration value: 0.5 kg
• Verifiable M III

PCE-CRM 40 is a portable handheld colorimeter or spectrophotometer used to accurately measure the correlated color temperature (CCT - in Kelvin), illuminance, chromaticity, excitation purity (Pe), luminous flux (in lumens - lm), RGB and dominant wavelength of light sources such as LED, organic LED (OLED) and other forms of organic electroluminescence (EL).

• Measuring range: 0.1 … 150,000 lux / 0.01 … 15,000 foot-candle
• Spectral wavelength range: 360 … 780 nm
• Display: 3.2" colour LCD
• Chromaticity: Ev xy, Ev u'v'

The weighbridge is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the weighbridge is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

• Weighing range : 600 kg
• Readability: 0.2 kg
• Calibration value: 0.2 kg
• Verifiable M III

The weighbridge is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the weighbridge is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

• Weighing range : 300 kg
• Readability: 0.1 kg
• Calibration value: 0.1 kg
• Verifiable M III

The PCE-830 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-6801 amp clamp (100 A)
• Electrical conductor pick-up: 30 mm / 1.1 in diameter
• Range selection: manual (1 A, 10 A, 100 A)
• Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values (single phase)

The 4-channel PCE-VM 5000 Accelerometer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.

• 4 channels / inputs
• Frequency range: 10 Hz … 1 kHz
• Measurement of acceleration, velocity and displacement
• Connection of up to 4 sensors simultaneously, 2 included
• Data storage on SD card
• Sampling rate: min. 1 sec.