The infrared HVAC meter is suitable for private and industrial use because of its price-performance ratio. An infrared HVAC meter is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

• Optical resolution 30:1
• Measuring range of -50 … 1000 °C / -58 … 1832 °F
• Maximum value display
• Adjustable emissivity

HVAC Meter to test leakage / RMS measurement / continuity and resistance test.

• Measures current up to 100 A
• Measures voltage up to 600 V
• Measures resistance up to 400 O
• Test cables are included

The HVAC meter has a measuring range of 0 … 1000 A AC/DC. The current is measured inductively using the clamp on the measuring device. Live supply lines with a diameter of up to 32 mm (1.2") can be connected to the HVAC meter.

• Measuring range: 0 … 1000 A AC/DC
• Bluetooth interface
• Inrush current measurement
• LC color display
• Not Connected Voltage function

• Flow rate: 113 ... 135 l/min
• Connection: 1/4 inch and 3/8 inch
• For common refrigerants e.g. R12, R22, R134a ...etc.
• High torque and efficient motor
• Motor output: 0.51 hp (370 W)
• Filter element to reduce oil mist
• Two-stage

The HVAC differential pressure meter PCE-P05 is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The HVAC differential pressure meter is particularly suitable for the complete documentation of your measuring tasks.

• Measuring range from -344 … +344 mbar
• Parameters:inH2O, psi, mbar, kPa, inHg, mmHg,   ozin², ftH2O, cmH2O, kgcm², bar
• Backlight can be switched on/off
• Software with USB cable included

• measurement range -125 ... +125 Pa (-1.25 ... +1.25 bar)
• resolution 0.01 Pa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• Cable length: 1 m / 3.3 ft
• Camera head: Ø 6.2 mm / 0.24 in
• 2-way camera probe
• Image and video recording
• Max. resolution 1920 x 1080
• 32 GB micro SD card
• Integrated microphone in the device

• Flow rate: 56 ... 68 l/min
• Connection: 1/4 inch
• For common refrigerants, e.g. R12, R22, R134a, etc.
• High torque and efficient motor
• Motor power: 0.34 HP (250 W)
• Filter element to reduce oil mist - Two-stage

• measurement range -1 ... +1 kPa (-10 ... +10 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -100 ... +100 kPa (-1 ... +1 bar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -2 ... +2 kPa (-20 ... +20 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

This HVAC meter is a two-channel measuring instrument. The HVAC meter offers a wide range of measurement options.

• K-type thermometer with dual input
• Temperature range: -210 … 1372 °C / -346 … 2501 °F
• Direct measurement / differential measurement (T1-T2)
• Electronic zero offset
• Readings in °C, °F or Kelvin (K)
• incl. ISO Calibration Certificate

The PCE-ST 1 HVAC Meter is a handheld digital device to measure temperature in the HVAC sector, as for instance in heating ducts, air conditioning vents, insulation, crawl spaces, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The HVAC Meter is very easy to use, with small dimensions and short response time.

• Measuring range:  -40 … 250°C / -40 … 482°F
• Indication of max. and min. values
• Data function
• Lock for continuous operation
• Measured value in ºC or ºF
• incl. ISO-Calibration Cerificate

• direct voltage: 0.1 mV ... 1000 V
• alternating voltage: 0.1 mV ... 750 V
• alternating current: 0.1 ... 1000 A
• resistance: 0.1 Ω ... 60 MΩ
• capacitance: 1 nF ... 100 mF
• frequency: 0 Hz ... 10 MHz
• temperature sensor: -20 ... +1000 °C
• non-contact voltage detection (NCV)
• automatic and manual measurement range selection
• incl. ISO-Calibration Certificate

Salt meter for EC and TDS (amount of salts and dissolved solid materials). Auto ranges up to 20,000 PPM.

• EC conductivity: 0…2000 µS/cm  /  0…20 mS/cm
• Salt content TDS: 0…2000 mg/l (ppm)  /  20,000 mg/l (PPM)
• Temperature: 0.0 … 60 °C / 32 … 140 °F
• Water resistant (IP 67)

With the Water Analysis Meter PCE-CM 41, it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. The Conductivity Tester is very easy to carry everywhere thanks to its small size.

• EC conductivity: 0…2000 µS/cm  /  0…20 mS/cm
• Salt content TDS: 0…2000 mg/l (ppm)  /  20000 mg/l (ppm)
• Temperature: 0.0 … 60 °C / 32 … 140 °F
• Water resistant (IP 67)

With our conductivity meter PCE-CM 41 it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. Our conductivity meter PCE-CM 41 is very easy to carry everywhere thanks to its small size. Auto ranges up to 20,000 PPM.

• EC conductivity: 0…2,000 µS/cm  /  0…20 mS/cm
• Salt content TDS: 0…2,000 mg/l (ppm)  /  20,000 mg/l (ppm)
• Temperature: 0.0…60 °C / 32 … 140 °F
• Water resistant (IP 67)

The pressure meter PCE-P05 is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure meter is particularly suitable for the complete documentation of your measuring tasks.

• Measuring range from -344 … +344 mbar
• Parameters:inH2O, psi, mbar, kPa, inHg, mmHg,   ozin², ftH2O, cmH2O, kgcm², bar
• Backlight can be switched on/off
• Software with USB cable included

The differential pressure meter PCE-P05 is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure meter is particularly suitable for the complete documentation of your measuring tasks.

• Measuring range from -344 … +344 mbar
• Parameters:inH2O, psi, mbar, kPa, inHg, mmHg,   ozin², ftH2O, cmH2O, kgcm², bar
• Backlight can be switched on/off
• Software with USB cable included

The clamp meter has a measuring range of 0 … 1000 A AC/DC. The current is measured inductively using the clamp on the measuring device. Live supply lines with a diameter of up to 32 mm (1.2") can be connected to the clamp meter.

• Measuring range: 0 … 1000 A AC/DC
• Bluetooth interface
• Inrush current measurement
• LC color display
• Not Connected Voltage function

The IoT meter has a measuring range of 0 … 1000 A AC/DC. The current is measured inductively using the clamp on the measuring device. Live supply lines with a diameter of up to 32 mm (1.2") can be connected to the IoT meter.

• Measuring range: 0 … 1000 A AC/DC
• Bluetooth interface
• Inrush current measurement
• LC color display
• Not Connected Voltage function

The environmental meter is a handheld digital device to measure temperature in the HVAC sector, as for instance in heating ducts, air conditioning vents, insulation, crawl spaces, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The environmental meter is very easy to use, with small dimensions and short response time.

• Measuring range:  -40 … 250°C / -40 … 482°F
• Indication of max. and min. values
• Data function
• Lock for continuous operation
• Measured value in ºC or ºF
• incl. ISO-Calibration Cerificate

Clamp Meter to test leakage / RMS measurement / continuity and resistance test. With the leakage Clamp Meter it is possible to measure leakage current with a range up to 100 A. The Clamp Meter can measure leakage current while current flows through electrical conductors that are not designed for conduction current. The leakage Clamp Meter is delivered manufacturer calibrated and can additionally be certified to ISO.

• Measures current up to 100 A
• Measures voltage up to 600 V
• Measures resistance up to 400 Ohms
• Test cables are included

With the relative humidity meter you can ensure the right climate in your office. The relative humidity meter measures the CO2 content of the air, the relative humidity and the room temperature. The relative humidity meter shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

• Large CO2 measuring range up to 9999 ppm
• Traffic light function for carbon dioxide
• Measures temperature and humidity
• Network operation
• Suitable for classrooms, offices, lecture halls