Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / Triple alarm-signaling / No service or calibration necessary / Self-testing function / CO, H2S or O2.

• Single-use Gas Leak Detector for CO
• 24 months continuous operation time / detection time
• Optic, acoustic, and haptic alarm
• Adjustable alarm levels
• 0 … 300 ppm

Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / Triple alarm-signaling / No service or calibration necessary / Self-testing function / CO, H2S or O2.

• Single-use Gas Leak Detector for CO
• 24 months continuous operation time / detection time
• Optic, acoustic, and haptic alarm
• Adjustable alarm levels
• 0 … 300 ppm

Single-use Carbon Dioxide Meter Clip and Clip+ with 24- or 36-month lifetime / Triple alarm-signaling / No service or calibration necessary / Self-testing function / CO, H2S or O2.

• Single-use Gas Leak Detector for CO
• 24 months continuous operation time / detection time
• Optic, acoustic, and haptic alarm
• Adjustable alarm levels
• 0 … 300 ppm

The humidity sensor was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the humidity sensor are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.

• Humidity measuring range: 0 … 100% RH
• Temperature measuring range: -20 … 60 °C
• Output: 4 … 20 mA
• Special Feature: Manual switchable analog value output

The humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the humidity sensor via the RS485 interface. In this compact humidity sensor, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

• Measuring range: 0.8 m / s … 50 m / s
• Measurement from: ≤0.8 m / s
• Output: pulses (reed contact)
• IP 65 protection
• mA, V, pulse or Modbus output

• Laboratory pH electrode (refillable)
• Measuring range: 0 ... 14 pH
• Diameter: 4.3 mm
• Temperature range: 0 ... 80 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application: Suitable for small liquid volumes

• pH electrode (refillable)
• Measuring range: 0 ... 14 pH
• Diameter: 12 mm
• Temperature range: 0 ... 80 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application: Soil and mud

With the IoT meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the climate meter. The IoT meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function
• incl. sinter filter

Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / triple alarm-signaling / no service or calibration necessary / self-testing function / CO, H2S or O2.

• Single-use Gas Leak Detector for O₂
• 24 months continuous operation time / detection time
• Optic, acoustic, and haptic alarm
• Adjustable alarm levels
• 0 … 30 % Vol.

Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / triple alarm-signaling / no service or calibration necessary / self-testing function / CO, H2S or O2.

• Single-use Gas Leak Detector for O₂
• 24 months continuous operation time / detection time
• Optic, acoustic, and haptic alarm
• Adjustable alarm levels
• 0 … 30 % Vol.

Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / triple alarm-signaling / no service or calibration necessary / self-testing function / CO, H2S or O2.

• Single-use Gas Leak Detector for O₂
• 24 months continuous operation time / detection time
• Optic, acoustic, and haptic alarm
• Adjustable alarm levels
• 0 … 30 % Vol.

This gas leak detector is a compact and reliable measuring device which serves to guarantee the safety of workers in companies. The gas leak detector has a lifespan of 2 years and is prepared for all environmental conditions that occur in industry.

• Measuring range sensor H2S: 0 … 100 ppm
• Alarm 1: 5 ppm
• Alarm 2: 10 ppm
• Robust housing
• Self test function
• 24 months operating time / detection time

This gas leak detector is a compact and reliable measuring device which serves to guarantee the safety of workers in companies. The gas leak detector has a lifespan of 2 years and is prepared for all environmental conditions that occur in industry.

• Measuring range sensor H2S: 0 … 100 ppm
• Alarm 1: 5 ppm
• Alarm 2: 10 ppm
• Robust housing
• Self test function
• 24 months operating time / detection time

The PCE-S 41 Vibration Meter is battery powered and easy to use. This Vibration Meter can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• headphones, 70 mm sensor, 290 mm sensor
• Weight: 240 g, with battery
• Dimensions:  206 mm x 50 mm x 32 mm

The car measuring device is battery powered and easy to use. This car measuring device can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• headphones, 70 mm sensor, 290 mm sensor
• Weight: 240 g, with battery
• Dimensions:  206 mm x 50 mm x 32 mm

The Condition Monitoring Stethoscope is battery powered and easy to use. This Condition Monitoring Stethoscope can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• Headphones, 70 mm long sensor, 290 mm long sensor
• Weight: 240 g, with battery
• Dimensions: 206 x 50 x 32 mm

The humidity detector is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the humidity detector via the RS485 interface. In this compact humidity detector, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

• Diameter camera head: 8.5 mm / 0.33 in
• Cable length: ca. 90 cm / 2ft 11 in
• 3.5" TFT LC-Display
• 4x optical zoom
• Viewing angle 60°
• 6 white, dimmable LEDs on the camera head
• Memory option on Micro SD card

The hygrometer is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the hygrometer via the RS485 interface. In this compact hygrometer, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

PCE-PMI 2 is a nondestructive concrete moisture meter or dampness instrument that measures the moisture content of concrete and other building materials. It offers many preset characteristic curves based on alternative material densities. This digital moisture device gives quick and accurate moisture measurement without causing any damage to the test material.

• Offers high-frequency penetration up to 50 mm / 1.96 inches in depth
• Features an alarm function when exceeding threshold levels
• Includes a metallic sphere or ball sensor   

PCE-PMI 2 is a nondestructive wood moisture meter or dampness instrument that measures the moisture content of concrete and other building materials. It offers many preset characteristic curves based on alternative material densities. This digital moisture device gives quick and accurate moisture measurement without causing any damage to the test material.

• Offers high-frequency penetration up to
  50 mm / 1.96 inches in depth
• Features an alarm function when exceeding threshold levels
• Includes a metallic sphere or ball sensor 

The HVAC meter is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the HVAC meter via the RS485 interface. In this compact HVAC meter, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus