142,90 €
Price excl. VAT &. delivery
The Condition Monitoring Infrared Thermometer has a measuring range of -50 … +500 °C and an adjustable emission value between 0.10 … 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.
The digital thermometer has a measuring range of -50 … +500 °C and an adjustable emission value between 0.10 … 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.
Mechanical shore durometer for measuring hardness of soft elastomer with drag needle. The shore durometer is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero.
Mechanical hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero.
The HVAC meter has a measuring range of -50 … +500 °C and an adjustable emission value between 0.10 … 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.
The infrared thermometer has a measuring range of -50 … +500 °C and an adjustable emission value between 0.10 … 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.
Mechanical hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero.
The pyrometer has a measuring range of -50 … +500 °C and an adjustable emission value between 0.10 … 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.
The pyrometer has a measuring range of -50 … +500 °C and an adjustable emission value between 0.10 … 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.
The Refrigerant Gauges has a measuring range of -50 … +500 °C and an adjustable emission value between 0.10 … 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.
The surface testing - temperature meter has a measuring range of -50 … +500 °C and an adjustable emission value between 0.10 … 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.
The temperature meter has a measuring range of -50 … +500 °C and an adjustable emission value between 0.10 … 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.
The thermometer has a measuring range of -50 … +500 °C and an adjustable emission value between 0.10 … 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.
The calibration frequency for the class II decibel meter calibrator is 1000 Hz and is a sinusoidal shape. Compared to other calibrators, this class II decibel meter calibrator has three adjustable sound pressure levels. 94 dB, 104 dB and 114 dB are available and can be selected by pressing a button on the class II decibel meter calibrator.
The calibration frequency for the class II sound level calibrator is 1000 Hz and is a sinusoidal shape. Compared to other calibrators, this class II sound level calibrator has three adjustable sound pressure levels. 94 dB, 104 dB and 114 dB are available and can be selected by pressing a button on the class II sound level calibrator.
The calibration frequency for the class II sound level meter calibrator is 1000 Hz and is a sinusoidal shape. Compared to other calibrators, this class II sound level meter calibrator has three adjustable sound pressure levels. 94 dB, 104 dB and 114 dB are available and can be selected by pressing a button on the class II sound level meter calibrator.
The heating mantle PCE-HM 100 is used in applications where samples or liquids must be quickly heated in the laboratory. The flask may have a volume of up to 100 ml and it is placed in the crocheted net of the heating mantle. Here it is heated by the heating elements with a power of 100 W, and the temperature can be continuously adjusted up to 450 °C using the rotary switch on the heating mantle.
The heating mantle PCE-HM 250 is an auxiliary device, which is used in laboratories. The heating mantle helps to heat or control the temperature of different samples or chemicals in the laboratory. The device has a crocheted net inside, in which you can hang the round bottom flask to heat it.
The humidity sensor was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the humidity sensor are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.
The HVACR tester was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the HVACR tester are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.
The hygrometer was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the hygrometer are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.
The relative humidity meter was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the relative humidity meter are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.
The thermo hygrometer was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the thermo hygrometer are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.
With the air humidity meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the air humidity meter. The air humidity meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.
Measuring ranges:
With the climate meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the climate meter. The climate meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.
Measuring ranges:
With the environmental meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental meter. The environmental meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.
Measuring ranges:
With the environmental tester it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental tester. The environmental tester can therefore be used universally because of its various measuring functions to determine the ambient conditions.
Measuring ranges:
