A belt tension meter measures the belt tension of a belt when it is stationary. The maintenance kit includes a vibration accelerometer for checking vibrating parts, machines and systems. It is also possible to measure the surface speed with a tachometer up to 99,999 revolutions per minute.

Belt Tension Meter

• Measurement of the vibration frequency of the belt
• Measuring range: 10 … 900 Hz
• Accuracy: ± (1% of reading + 4 digits)Vibration Meter
• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 inTachometer
• Contactless measurement: 5 … 99,999 rpm
• Contact measurement: 0.5 … 19,999 rpm
• Surface measurement: 0.05 … 1,999.9 m/min

Verifiable waterproof benchtop scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable waterproof compact balance in stainless steel with separate indicator (no corrosion). The multifunctional compact calance is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable waterproof industrial scale in stainless steel with separate indicator (no corrosion). The industrial scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable waterproof Laboratory Balance in stainless steel with separate indicator (no corrosion). The multifunctional Laboratory Balance is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable waterproof Laboratory Scale in stainless steel with separate indicator (no corrosion). The multifunctional Laboratory Scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Legal for Trade Balance in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable waterproof livestock scale in stainless steel with separate indicator (no corrosion). The livestock scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

NTEP Certified Scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable waterproof Precision Balances in stainless steel with separate indicator (no corrosion). The Precision Balances are manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable waterproof shipping scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable waterproof Stainless Steel scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable waterproof tabletop scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Trade Approved Scale in stainless steel with separate indicator (no corrosion). The trade approved scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable washdown scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable waterproof scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

Verifiable waterproof Weighing Platform in stainless steel with separate indicator (no corrosion). The Weighing Platform is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

• Weighing capacity: 30 kg
• Readability: 10 g
• Calibration value: 10 g
• Weighing surface: 400 x 500 mm
• Verifiable M III

The Xgard-1-O3 is a single-gas Gassensor used to warn for gases (Ozone, O₃, 0 … 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Ozone, O₃, 0 … 1 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O₃, 0 … 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Ozone, O₃, 0 … 1 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Ozone Meter Xgard-1-O3 is a single-gas gas sensor used to warn for gases (Ozone, O₃, 0 … 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Ozone, O₃, 0 … 1 ppm)
• Additional display and alarm station
• ATEX or UL approval

The accelerometer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the accelerometer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display

PCE-ATP 1 is a food safety / hygiene - ATP tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

The condition monitoring vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the condition monitoring vibration meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display

• Cable length: 1000 mm / 3ft 3"
• Movable camera head Ø 4.5 mm
• Image transmission via wifi
• For iOS and Android
• Camera resolution / image sensor: 1024 x 768 Px

The PCE-DDM 3 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 3 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

• Measurement range: 3,000 kg / 30 kN / 6,614 lbs
• Resolution: 1 kg / 10 N
• Units of measurement: kg / t / lbs / N / kN
• Comes with remote control indicator

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN40 (35 ... 43 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN40 (46 ... 54 mm)

PCE-ATP 1 is a food safety / hygiene - ATP tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

PCE-ATP 1 is a food safety / hygiene - ATP test instrument, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 3,000 kg / 30 kN / 6,614 lbs
• Resolution: 1 kg / 10 N
• Minimum load: 10 kg
• Supplied with remote control indicator