The PCE-N20U is a power indicator used for signal processing. Designed for quick and easy system integration, the digital power indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The power indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a panel meter used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The panel meter also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

PCE-N20U is a frequency indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a digital temperature indicator used for signal processing. Designed for quick and easy system integration, the digital temperature indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The temperature indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The digital universal indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the digital universal indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the digital universal indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The PCE-N20U is a panel indicator used for signal processing. Designed for quick and easy system integration, the digital panel indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The panel indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a pressure indicator used for signal processing. Designed for quick and easy system integration, the digital pressure indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The pressure indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a process indicator used for signal processing. Designed for quick and easy system integration, the digital process indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The process indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a voltage indicator used for signal processing. Designed for quick and easy system integration, the digital voltage indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The voltage indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

PCE-KLM 1 is a screw-on luminance adaptor for the PCE-L 100 lux or light meter.

• Lens: 100 mm, f / 2.5
• Dimensions: 126 x 169 x 44 mm
• Weight: Approx. 550 g

This clamp meter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp meter.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function

The digital panel meter is used for processing signals from Pt100 temperature sensors or thermocouples (type J, K). The measurement results are shown on the large 5-digit LED-display of the panel meter. Depending on the actual values, the temperature can be shown in three different colors, which makes it easier to evaluate them.

• Input: Pt100, thermocouple type J or type K
• Accuracy: ± (0.2 % FS + 1 dgt.)
• two open collector outputs
• 24 V power supply sytem for sensors and transducers
• 5-digit, three-coloured LED display

This clamp on tester was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp on tester.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function

The digital panel indicator is used for processing signals from Pt100 temperature sensors or thermocouples (type J, K). The measurement results are shown on the large 5-digit LED-display of the panel indicator. Depending on the actual values, the temperature can be shown in three different colors, which makes it easier to evaluate them.

• Input: Pt100, thermocouple type J or type K
• Accuracy: ± (0.2 % FS + 1 dgt.)
• two open collector outputs
• 24 V power supply sytem for sensors and transducers
• 5-digit, three-coloured LED display

This digital multimeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this digital multimeter.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function

This voltmeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this voltmeter.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function

This voltmeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this voltmeter.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function

This HVAC meter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this HVAC meter.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function

This current clamp was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this current clamp.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function

• CO2: 400 ... 5,000 ppm
• formaldehyde: 0 ... 1.999 mg/m³
• TVOC: 0 ... 9.999 mg/m³
• temperature: 0 ... 50 °C
• relative humidity: 0 ... 99 % RH
• particulate matter: PM1 / PM 2.5 / PM 10
• interface: USB-C
• WiFi connection
• app with live data transmission

This electrical tester was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this electrical tester.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function

• measurement range -40 ... +40 kPa (-400 ... +400 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

The 2-point process controller / temperature controller is a compact temperature controller for use in a wide range of tasks. This 2-point temperature controller PCE-RE22P processes the process signals 0 … 20mA, 4 … 20 mA, 0 … 5 V and 0 … 10 V as input signals. Different operating modes can be selected to optimally regulate the controlled variable to the reference variable.

• Power supply: 230 V AC, 110 V AC, 24 V AC (selectable)
• Process signals: 0/4 … 20 mA, 0 … 5/10 V
• Output: Relay / SSR (selectable)
• Manual control mode

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in