Query results | PCE Instruments

1.170,00 €

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Automotive Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Automotive Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Car Measuring Device LM-MCDX-5F

1.170,00 €

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Car Measuring Device. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Car Measuring Device allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Coating Thickness Gauge LM-MCDX-5F

1.170,00 €

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Coating Thickness Gauge. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Coating Thickness Gauge allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Material Tester LM-MCDX-5F

1.170,00 €

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Material Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Material Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Material Thickness Meter LM-MCDX-5F

1.170,00 €

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Material Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Material Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Paint Gauge / Paint Tester LM-MCDX-5F

1.170,00 €

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Paint Gauge / Paint Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Paint Gauge / Paint Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Paint Test Equipment / Paint Testing Equipment LM-MCDX-5F

1.170,00 €

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Paint Test Equipment / Paint Testing Equipment. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Paint Test Equipment / Paint Testing Equipment allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Surface Testing LM-MCDX-5F

1.170,00 €

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Surface Testing. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Surface Testing allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Thickness Gauge LM-MCDX-5F

1.170,00 €

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Gauge. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Thickness Gauge allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Thickness Meter LM-MCDX-5F

1.170,00 €

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Dynamometer PCE-DFG 5K X

1.159,90 €

Price excl. VAT &. delivery

The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The dynamometer is supplied with an external measuring cell and can measure forces of up to 5,000 N.

Measuring range: 0 … 5 kN
Resolution: 1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 … 7,200 Hz

Electrical Tester 2-Channel PCE-PA 7500

1.159,90 €

Price excl. VAT &. delivery

The electrical tester is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The electrical tester has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

Power range: 0.1 … 5000 W
Current range: 0.001 … 20 A AC
Frequency, power factor, energy
Accuracy: ±(0.4% of reading + 0.1)
2 input channels
Color display

Force Gauge PCE-DFG 5K X

1.159,90 €

Price excl. VAT &. delivery

The force measuring device records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The force gauge is supplied with an external measuring cell and can measure forces of up to 5,000 N.

Measuring range: 0 … 5 kN
Resolution: 1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 … 7,200 Hz

HVAC Meter 2-Channel PCE-PA 7500

1.159,90 €

Price excl. VAT &. delivery

The HVAC meter is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

Power range: 0.1 … 5000 W
Current range: 0.001 … 20 A AC
Frequency, power factor, energy
Accuracy: ±(0.4% of reading + 0.1)
2 input channels
Color display

Portable Power Analyzer 2-Channel PCE-PA 7500

1.159,90 €

Price excl. VAT &. delivery

The portable power analyzer is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

Power range: 0.1 … 5000 W
Current range: 0.001 … 20 A AC
Frequency, power factor, energy
Accuracy: ±(0.4% of reading + 0.1)
2 input channels
Color display

Power Analyzer 2-Channel PCE-PA 7500

1.159,90 €

Price excl. VAT &. delivery

The power analyzer is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

Power range: 0.1 … 5000 W
Current range: 0.001 … 20 A AC
Frequency, power factor, energy
Accuracy: ±(0.4% of reading + 0.1)
2 input channels
Color display

Power Meter 2-Channel PCE-PA 7500

1.159,90 €

Price excl. VAT &. delivery

The power meter is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

Power range: 0.1 … 5000 W
Current range: 0.001 … 20 A AC
Frequency, power factor, energy
Accuracy: ±(0.4% of reading + 0.1)
2 input channels
Color display

Tensile Tester PCE-DFG 5K X

1.159,90 €

Price excl. VAT &. delivery

The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Tensile Tester is supplied with an external measuring cell and can measure forces of up to 5,000 N.

Measuring range: 0 … 5 kN
Resolution: 1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 … 7,200 Hz

Tension Dynamometer / Tension Load Cell PCE-DFG 5K X

1.159,90 €

Price excl. VAT &. delivery

The Tension Dynamometer / Tension Load Cell records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Tension Dynamometer / Tension Load Cell is supplied with an external measuring cell and can measure forces of up to 5,000 N.

Measuring range: 0 … 5 kN
Resolution: 1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 … 7,200 Hz

Digital Universal Indicator PCE-BPD-U-41A

1.151,90 €

Price excl. VAT &. delivery

The digital universal indicator is designed in such a way that the measured values displayed can be read from a large distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for digital universal indicator is 25 m or 50 m (82 ft or 164 ft).

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 100 mm / 3.9"
Number of outputs: 2
Voltage supply: 85 … 265 V AC / 120 … 370 V DC

Digital Universal Indicator PCE-BPD-U-41D

1.151,90 €

Price excl. VAT &. delivery

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 100 mm / 3.9"
Number of outputs: 2
Voltage supply: 11 … 36 V DC

Panel Meter PCE-BPD-U-41A

1.151,90 €

Price excl. VAT &. delivery

The panel meter is designed in such a way that the measured values displayed can be read from a large distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for panel meter is 25 m or 50 m (82 ft or 164 ft).

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 100 mm / 3.9"
Number of outputs: 2
Voltage supply: 85 … 265 V AC / 120 … 370 V DC

Panel Meter PCE-BPD-U-41D

1.151,90 €

Price excl. VAT &. delivery

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 100 mm / 3.9"
Number of outputs: 2
Voltage supply: 11 … 36 V DC

Accelerometer PCE-VT 3750S

1.149,90 €

Price excl. VAT &. delivery

The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This accelerometer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Colored graphic display

incl. headset

Accelerometer PCE-VT 3850

1.149,90 €

Price excl. VAT &. delivery

The accelerometer is the ideal companion for checking vibrating parts, machines and systems. With the external vibration sensor on the accelerometer, the vibration displacement up to 3.9 mm, the vibration velocity up to 399.9 mm/s and the vibration acceleration up to 399.9 m/s² can be determined.

Measuring ranges

Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Data logger: 50 memory locations with 43200 measured values each
Rechargeable battery
Color graphic display
incl. headset

Aerosol meter PCE-MPC 25

1.149,90 €

Price excl. VAT &. delivery

The Aerosol meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the Aerosol meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Aerosol particle counter PCE-MPC 25

1.149,90 €

Price excl. VAT &. delivery

The Aerosol particle counter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the Aerosol particle counter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Air Humidity Meter PCE-DPM 3

1.149,90 €

Price excl. VAT &. delivery

The air humidity meter is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This air humidity meter measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

Air Quality Meter PCE-MPC 25

1.149,90 €

Price excl. VAT &. delivery

The air quality meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air quality meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Air Sampler PCE-MPC 25

1.149,90 €

Price excl. VAT &. delivery

The air sampler is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air sampler determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Climate Meter PCE-DPM 3

1.149,90 €

Price excl. VAT &. delivery

The climate meter is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This climate meter measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

Dew point, H2O, temperature, humidity measurement
Data memory for approx. 50,000 measurement data
CSV data export
With G1 / 2" connection thread
For inline measurement of pressure pipes
Sensor protected with a cap
Left connection has NO function

Coating Thickness Gauge PCE-CT 80HP-F5N3-ICA incl. ISO-Calibration Certificate

1.149,90 €

Price excl. VAT &. delivery

The paint gauge can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the paint gauge covers a wide range of measuring tasks.

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(1.5 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads
incl. ISO-Calibration Certificate

Condition Monitoring Sound Level Meter (Badge Type) PCE-MND 10

1.149,90 €

Price excl. VAT &. delivery

The Condition Monitoring Sound Level Meter (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC 61252:2002 standard. With a measuring range of 70 … 140 dB and a frequency weighting of A, B and Z, the Condition Monitoring Sound Level Meter is ideal for this.

Measuring range: 70 … 140 dB
Frequency weighting: A, B and Z
Battery life: >15 hours
LEQ measurement
Memory
USB interface
Battery / power supply
Software download
Standards: IEC 61252:2002, ANSI S1.25-1991

Condition Monitoring Stroboscope PCE-LES 400

1.149,90 €

Price excl. VAT &. delivery

A Condition Monitoring Stroboscope is a device for permanent installation that generates rapid flashes of light with energy-efficient and long-lasting LEDs. With a wide measurement range of 50 ... 36,000 FPM, a high resolution of 0.1 FPM and an accuracy of 0.01 %, it offers precise and reliable measurements. Our Condition Monitoring Stroboscope can be triggered both internally and externally and supports four external trigger modes.

frequency: 50 ... 36000 FPM
resolution: 0.1 FPM
accuracy: ±0.01 % of Rd.
frequency: 1 ... 600 Hz
resolution: 0.01 Hz
accuracy: ±0.01 % of Rd.
flash duration 1 ... 3 %, max. 100 µs
trigger input

Condition Monitoring Vibration Meter PCE-VT 3750S

1.149,90 €

Price excl. VAT &. delivery

The condition monitoring vibration meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This condition monitoring vibration meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Colored graphic display

incl. headset

Condition Monitoring Vibration Meter PCE-VT 3850

1.149,90 €

Price excl. VAT &. delivery

The condition monitoring vibration meter is the ideal companion for checking vibrating parts, machines and systems. With the external vibration sensor on the condition monitoring vibration meter, the vibration displacement up to 3.9 mm, the vibration velocity up to 399.9 mm/s and the vibration acceleration up to 399.9 m/s² can be determined.

Measuring ranges

Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Data logger: 50 memory locations with 43200 measured values each
Rechargeable battery
Color graphic display
incl. headset