The frequency indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the frequency indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the frequency indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The panel indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the panel indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the panel indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The pressure indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the pressure indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the pressure indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The process indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the process indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the process indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The digital temperature indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the digital temperature suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the digital temperature.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The voltage indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the voltage indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the voltage indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The digital universal indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the digital universal indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the digital universal indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The PCE-N20U is a power indicator used for signal processing. Designed for quick and easy system integration, the digital power indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The power indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a panel meter used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The panel meter also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The digital temperature indicator is used for processing signals from Pt100 temperature sensors or thermocouples (type J, K). The measurement results are shown on the large 5-digit LED-display of the temperature indicator. Depending on the actual values, the temperature can be shown in three different colors, which makes it easier to evaluate them.

• Input: Pt100, thermocouple type J or type K
• Accuracy: ± (0.2 % FS + 1 dgt.)
• two open collector outputs
• 24 V power supply sytem for sensors and transducers
• 5-digit, three-coloured LED display

PCE-N20U is a frequency indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a panel indicator used for signal processing. Designed for quick and easy system integration, the digital panel indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The panel indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a pressure indicator used for signal processing. Designed for quick and easy system integration, the digital pressure indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The pressure indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a process indicator used for signal processing. Designed for quick and easy system integration, the digital process indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The process indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a digital temperature indicator used for signal processing. Designed for quick and easy system integration, the digital temperature indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The temperature indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The PCE-N20U is a voltage indicator used for signal processing. Designed for quick and easy system integration, the digital voltage indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The voltage indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

With the temperature meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the temperature meter. The temperature meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Wireless
• MIN / MAX / HOLD function

The power indicator is used for the signal processing of 4 .. 20 mA. The power indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The frequency indicator is used for the signal processing of 4 .. 20 mA. The frequency indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The panel indicator is used for the signal processing of 4 .. 20 mA. The panel indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The pressure indicator is used for the signal processing of 4 .. 20 mA. The pressure indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The process indicator is used for the signal processing of 4 .. 20 mA. The process indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The temperature indicator is used for the signal processing of  4…20 mA. The temperature indicator offers a wide field of application due to the fact that its signal can be freely scaled. The temperature indicator has a 5-digit LED display to allow the user to directly read current measured values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The voltage indicator is used for the signal processing of 4 .. 20 mA. The voltage indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

With the air humidity meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the air humidity meter. The air humidity meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

With the climate meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the climate meter. The climate meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

With the dew point thermometer it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the dew point thermometer. The dew point thermometer can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

With the environmental meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental meter. The environmental meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

With the environmental tester it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental tester. The environmental tester can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

With the humidity detector it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the humidity detector. The humidity detector can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

With the hygrometer it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the hygrometer. The hygrometer can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

• Temperature: -20 … 60 °C / -4 … 140 °F
• Humidity: 0 … 100%
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

With the relative humidity meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the relative humidity meter. The relative humidity meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

With the thermo hygrometer it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the thermo hygrometer. The thermo hygrometer can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

With the thermometer it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the thermometer. The thermometer can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

The concrete moisture meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the concrete moisture meter. This guarantees a non-destructive measurement with the concrete moisture meter. The concrete moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

• Measuring range: 0.0 … 100.0%
• Resolution: 0.1%
• Measuring depth: 20 … 40 mm / 0.78 … 1.57"
• Interface: Bluetooth 4.0
• Free Android and iOS app