The PCE-TG 300-NO2 is a condition monitoring thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring thickness meter. Wall thicknesses under a coating can also be measured with the condition monitoring thickness meter.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO2 is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO2 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO2 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO2 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO2 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO2 is a thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. Wall thicknesses under a coating can also be measured with the thickness gauge.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO2 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO2 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO2 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO2 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-NO2 is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The Xgard-1-CO is a single-gas Carbon Monoxide Meter used to warn for gases (Carbon Monoxide, CO, 0 … 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Carbon Monoxide, CO, 0 … 250 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-CO is a single-gas gas detector used to warn for gases (Carbon Monoxide, CO, 0 … 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Carbon Monoxide, CO, 0 … 250 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 … 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Hydrogen sulfide, H₂S, 0 … 25 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-CO is a single-gas Gas Leak Detector used to warn for gases (Carbon Monoxide, CO, 0 … 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Carbon Monoxide, CO, 0 … 250 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 … 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Hydrogen sulfide, H₂S, 0 … 25 ppm)
• Additional display and alarm station
• ATEX or UL approval

• AC voltage: 0 … 600 V
• Resolution 0.1 V 
• Accuracy ±1 % of Mw. ±5 digits
• Alternating current: 0 … 1000 A
• Resolution 0.1 A 
• Accuracy 1.5 % v.Mw.
• Active power
• Power factor
• Active energy
• Frequency
• Adjustable alarms
• Memory and software
• incl. ISO-Calibration Certificate

• AC voltage: 0 … 600 V
• Resolution 0.1 V 
• Accuracy ±1 % of Mw. ±5 digits
• Alternating current: 0 … 1000 A
• Resolution 0.1 A 
• Accuracy 1.5 % v.Mw.
• Active power
• Power factor
• Active energy
• Frequency
• Adjustable alarms
• Memory and software
• incl. ISO-Calibration Certificate

• AC voltage: 0 … 600 V
• Resolution 0.1 V 
• Accuracy ±1 % of Mw. ±5 digits
• Alternating current: 0 … 1000 A
• Resolution 0.1 A 
• Accuracy 1.5 % v.Mw.
• Active power
• Power factor
• Active energy
• Frequency
• Adjustable alarms
• Memory and software
• incl. ISO-Calibration Certificate

• AC voltage: 0 … 600 V
• Resolution 0.1 V 
• Accuracy ±1 % of Mw. ±5 digits
• Alternating current: 0 … 1000 A
• Resolution 0.1 A 
• Accuracy 1.5 % v.Mw.
• Active power
• Power factor
• Active energy
• Frequency
• Adjustable alarms
• Memory and software
• incl. ISO-Calibration Certificate

• AC voltage: 0 … 600 V
• Resolution 0.1 V 
• Accuracy ±1 % of Mw. ±5 digits
• Alternating current: 0 … 1000 A
• Resolution 0.1 A 
• Accuracy 1.5 % v. Mw.
• Active power
• Power factor
• Active energy
• Frequency
• Adjustable alarms
• Memory and software
• incl. ISO-Calibration Certificate

• AC voltage: 0 … 600 V
• Resolution 0.1 V 
• Accuracy ±1 % of Mw. ±5 digits
• Alternating current: 0 … 1000 A
• Resolution 0.1 A 
• Accuracy 1.5 % v.Mw.
• Active power
• Power factor
• Active energy
• Frequency
• Adjustable alarms
• Memory and software
• incl. ISO-Calibration Certificate

• AC voltage: 0 … 600 V
• Resolution 0.1 V 
• Accuracy ±1 % of Mw. ±5 digits
• Alternating current: 0 … 1000 A
• Resolution 0.1 A 
• Accuracy 1.5 % v.Mw.
• Active power
• Power factor
• Active energy
• Frequency
• Adjustable alarms
• Memory and software
• incl. ISO-Calibration Certificate

• AC voltage: 0 … 600 V
• Resolution 0.1 V 
• Accuracy ±1 % of Mw. ±5 digits
• Alternating current: 0 … 1000 A
• Resolution 0.1 A 
• Accuracy 1.5 % v.Mw.
• Active power
• Power factor
• Active energy
• Frequency
• Adjustable alarms
• Memory and software
• incl. ISO-Calibration Certificate

• AC voltage: 0 … 600 V
• Resolution 0.1 V 
• Accuracy ±1 % of Mw. ±5 digits
• Alternating current: 0 … 1000 A
• Resolution 0.1 A 
• Accuracy 1.5 % v.Mw.
• Active power
• Power factor
• Active energy
• Frequency
• Adjustable alarms
• Memory and software
• incl. ISO-Calibration Certificate

• AC voltage: 0 … 600 V
• Resolution 0.1 V 
• Accuracy ±1 % of Mw. ±5 digits
• Alternating current: 0 … 1000 A
• Resolution 0.1 A 
• Accuracy 1.5 % v.Mw.
• Active power
• Power factor
• Active energy
• Frequency
• Adjustable alarms
• Memory and software
• incl. ISO-Calibration Certificate

The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This accelerometer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

• Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Colored graphic display
• Incl. ISO calibration certificate

The PCE-TG 300-NO7 is a condition monitoring thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring thickness meter. Wall thicknesses under a coating can also be measured with the condition monitoring thickness meter.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth

• Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Colored graphic display
• Incl. ISO calibration certificate

The HVAC meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This HVAC meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

• Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Colored graphic display
• Incl. ISO calibration certificate

The PCE-TG 300-NO7 is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth

The PCE-TG 300-NO7 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth

The PCE-TG 300-NO7 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth

The PCE-TG 300-NO7 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth