Products for 'Material Prüfstand PCE UTU 10 '

884,90 €

Price excl. VAT &. delivery

Due to its compact design, the PCE-2550 material tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the material tester PCE-2550 is versatile.

Measurement according to Leeb Rebound method
Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
Accuracy: ± 0.4%, Repeatability: ± 0.6%
Impact Device: Type D
Measuring Direction: 360°
Internal measured value memory

Material Tester PCE-2000N

891,90 €

Price excl. VAT &. delivery

The PCE Instruments PCE-2000N material tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

Measurement according to Leeb Rebound method
Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
External impact device on 1.5 m / 4.9 ft cable
Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
Storage data measurements on a USB stick
Color display, Measurement in different angles possible, Various other impactors as accessories

Material Thickness Meter PCE-TG 300-NO5

1.026,90 €

Price excl. VAT &. delivery

The PCE-TG 300-NO5 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Material Tester PCE-TG 300-NO5

1.026,90 €

Price excl. VAT &. delivery

The PCE-TG 300-NO5 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Material Tester PCE-TG 300-NO5/90

1.005,90 €

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Material Thickness Meter PCE-TG 150A HT

956,90 €

Price excl. VAT &. delivery

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C

Material Tester PCE-CT 80-FN3

887,90 €

Price excl. VAT &. delivery

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Tester PCE-CT 80-FN2

867,90 €

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Tester PCE-CT 80-FN2D5

879,90 €

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"