The Xgard-1-O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O₂, 0 … 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Oxygen, O₂, 0 … 25 vol%)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-O2 is a single-gas gas sensor used to warn for gases (Oxygen, O₂, 0 … 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Oxygen, O₂, 0 … 25 vol%)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-O2 is a single-gas Oxygen Meter used to warn for gases (Oxygen, O₂, 0 … 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Oxygen, O₂, 0 … 25 vol%)
• Additional display and alarm station
• ATEX or UL approval

The PCE Instruments PCE-2000N durometer uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

• Measurement according to Leeb Rebound method
• Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
• Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
• External impact device on 1.5 m / 4.9 ft cable
• Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
• Storage data measurements on a USB stick
• Color display, Measurement in different angles possible, Various other impactors as accessories

Due to its compact design, the PCE-2550 durometer is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the durometer PCE-2550 is versatile.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.4%, Repeatability: ± 0.6%
• Impact Device: Type D
• Measuring Direction: 360°
• Internal measured value memory

PCE-2500N-ICA is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

• Measuring principle: Leeb Rebound method
• Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
• Accuracy: ± 0.5%; Repeatability: ± 0.8%
• Type D impact device
• Includes ISO calibration certificate

The Metal Hardness Testing Durometer PCE-900-ICA measures the hardness of nine different metals using the Leeb rebound method. This means that with the material hardness tester a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The Metal Hardness Testing Durometer measures the metal hardness in 6 different hardness scales. 

• Measurement according to Leeb Rebound method
• Testing of HRC, HRB, HV, HB, HSD
• Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
• Accuracy: 0.80% / Repeatability: 1.10%
• Incl. type D Leeb probe
• Optional Software Available
• incl. ISO Calibration Certificate