The Concrete tester is a damp meter for wood used to perform noninvasive, nondestructive moisture measurements of wood, timber and other construction or building materials. An ideal tool for assessing everything from lumber to floors and more, this Concrete tester uses electromagnetic waves that penetrate approximately 50 mm / 1.96 inches to 60 mm / 2.36 inches deep (depending on substrate) to return a mean-value moisture content percentage.

• Moisture content measuring range: 4% … 60% wood, 0% … 10% building  materials
• Resolution: 0.1%
• Accuracy: ±0.7%

The manometer PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The manometer PCE-PDA 1L has many different pressure measuring functions. 

• Measuring range: ± 2000 Pa  / ± 0.29 psi / ± 0.02 bar
• Resolution: 1 Pa / 0.000145 psi / 0.00001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory 
• Data logger and leak test 
• Temperature measurement, flow measurement

The relative pressure manometer PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this pressure manometer in the range between -100 … 2000 kPa. The relative pressure manometer PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.

• Measuring range pressure: -100 … 2000 kPa relative/ -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

The manometer PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The manometer PCE-PDA 1L has many different pressure measuring functions.

• Measuring range: ± 2000 Pa  / ± 0.29 psi / ± 0.02 bar
• Resolution: 1 Pa / 0.000145 psi / 0.00001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory 
• Data logger and leak test 
• Temperature measurement, flow measurement

• Measuring range: -200 ... 1800°C / -328 ... 3272°F
• High accuracy: ± (0.04 % v.Mw. + 0.3 K) for type K
• Thermocouple types: K, J, S, R, E, T, N, B
• Memory for 10 million measured values
• Alarm limits adjustable
• 12 input channels
• PC software

The dual infrared digital thermometer is used for fast surface temperature measurement. The two laser points of the infrared digital thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

• Temperature measurement up to 1600°C / 2912°F
• Cross laser thermometer
• K-Type or infrared measurement
• Optical resolution: 60:1- Adjustable emissivity
•  Can be calibrated
•  Suitable for long-term measurements

The dual infrared pyrometer is used for fast surface temperature measurement. The two laser points of the pyrometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

• Temperature measurement up to 1600°C / 2912°F
• Cross laser thermometer
• K-Type or infrared measurement
• Optical resolution: 60:1- Adjustable emissivity
•  Can be calibrated
• Suitable for long-term measurements

The dual infrared temperature meter is used for fast surface temperature measurement. The two laser points of the infrared temperature meter PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

• Temperature measurement up to 1600°C / 2912°F
• Cross laser thermometer
• K-Type or infrared measurement
• Optical resolution: 60:1- Adjustable emissivity
•  Can be calibrated
• Suitable for long-term measurements

The dual infrared thermometer is used for fast surface temperature measurement. The two laser points of the infrared thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

• Temperature measurement up to 1600°C / 2912°F
• Cross laser thermometer
• K-Type or infrared measurement
• Optical resolution: 60:1- Adjustable emissivity
• Can be calibrated
•  Suitable for long-term measurements

The dual infrared pyrometer is used for fast surface temperature measurement. The two laser points of the pyrometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

• Temperature measurement up to 1600°C / 2912°F
• Cross laser thermometer
• K-Type or infrared measurement
• Optical resolution: 60:1- Adjustable emissivity
•  Can be calibrated
• Suitable for long-term measurements

The manometer PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The manometer PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The manometer PCE-PDA 100L is a reliable differential pressure gauge for pressure measurement of gases in the range of -100 to +200 kPa. The manometer PCE-PDA 100L has many different pressure measuring functions.

• Measuring range: -100 … 200 kPa / -14.5 …  29 psi / -1 … 2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement

The dual infrared thermometer is used for fast surface temperature measurement.The two laser points of the infrared thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement.

• Temperature measurement up to 1600 °C / 2912 °F
• Cross laser thermometer
• K-Type or infrared measurement
• Optical resolution 60:1
• Adjustable emissivity
• Can be calibrated
• Suitable for long-term measurements