The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

- Measuring range (with sensor): 1.20 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of the weight. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing

- High temperature probe: -10 ... 350 °C

The PCE Instruments PCE-2000N material tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

- Measurement according to Leeb Rebound method
- Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
- Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
- External impact device on 1.5 m / 4.9 ft cable
- Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
- Storage data measurements on a USB stick
- Color display, Measurement in different angles possible, Various other impactors as accessories
- Incl. ISO calibration certificate

 

The material thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the material thickness meter.

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

- Measuring range (with sensor): 1.20 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of the weight. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing

- High temperature probe: -10 ... 350 °C

The PCE Instruments PCE-2000N metal hardness tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

- Measurement according to Leeb Rebound method
- Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
- Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
- External impact device on 1.5 m / 4.9 ft cable
- Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
- Storage data measurements on a USB stick
- Color display, Measurement in different angles possible, Various other impactors as accessories
- Incl. ISO calibration certificate

 

The NDT tester - thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the NDT tester - thickness meter.

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

- Measuring range (with sensor): 1.20 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of the weight. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing

- High temperature probe: -10 ... 350 °C

The PCE Instruments PCE-2000N NDT tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

- Measurement according to Leeb Rebound method
- Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
- Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
- External impact device on 1.5 m / 4.9 ft cable
- Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
- Storage data measurements on a USB stick
- Color display, Measurement in different angles possible, Various other impactors as accessories
- Incl. ISO calibration certificate

 

The paint thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness gauge.

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

- Measuring range (with sensor): 1.20 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of the weight. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing

- High temperature probe: -10 ... 350 °C

The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

- Measuring range (with sensor): 1.20 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of the weight. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing

- High temperature probe: -10 ... 350 °C

The thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness gauge.

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

- Measuring range (with sensor): 1.20 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of the weight. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing

- High temperature probe: -10 ... 350 °C

The thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness meter.

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

- Measuring range (with sensor): 1.20 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of the weight. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing

- High temperature probe: -10 ... 350 °C

The ultrasonic thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic thickness tester.

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

- Measuring range (with sensor): 1.20 ... 300.0 mm

- Resolution: 0.01 mm at ≤99.99 mm

- Accuracy: ±0.5 % of the weight. + 0.05 mm

- Memory capacity: 1500 measured values

- Calibration reference on housing

- High temperature probe: -10 ... 350 °C