- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter

- Relative scale: 0.0 ... 99.9%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measurements on wood and concrete
- Individually adjustable alarm limits
- Setting in CM% possible
- Numerical and graphical view
- Results are delivered by Carbit method

- Relative scale: 0.0 ... 99.9%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measurements on wood and concrete
- Individually adjustable alarm limits
- Setting in CM% possible
- Numerical and graphical view
- Results are delivered by Carbide method

- Relative scale: 0.0 ... 99.9%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measurements on wood and concrete
- Individually adjustable alarm limits
- Setting in CM% possible
- Numerical and graphical view
- Results are delivered by Carbit method

- Relative scale: 0.0 ... 99.9%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measurements on wood and concrete
- Individually adjustable alarm limits
- Setting in CM% possible
- Numerical and graphical view
- Results are delivered by Carbit method

- Relative scale: 0.0 ... 99.9%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measurements on wood and concrete
- Individually adjustable alarm limits
- Setting in CM% possible
- Numerical and graphical view
- Results are delivered by Carbit method

- Relative scale: 0.0 ... 99.9%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measurements on wood and concrete
- Individually adjustable alarm limits
- Setting in CM% possible
- Numerical and graphical view
- Results are delivered by Carbit method

- Relative scale: 0.0 ... 99.9%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measurements on wood and concrete
- Individually adjustable alarm limits
- Setting in CM% possible
- Numerical and graphical view
- Results are delivered by Carbit method

- Relative scale: 0.0 ... 99.9%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measurements on wood and concrete
- Individually adjustable alarm limits
- Setting in CM% possible
- Numerical and graphical view
- Results are delivered by Carbit method

The cable fault meter PCE-CLT 10 is a multifunctional device which enables high accuracy and fast measurement results. If used appropriately, the cable fault meter can be used to measure cables that have already been installed and are still to be installed.

- Measuring range cable length: 5 ... 3000 m / 16.4 ... 9842.5 ft
- Measurement Units: m, ft
- Resolution: 0.1 m / 0.3 ft
- Measuring principle: time domain reflectometer
- 20 pre-set cable types

- Measuring range cable length: 5 ... 3000 m / 16.4 ... 9842.5 ft
- Measurement Units: m, ft
- Resolution: 0.1 m / 0.3 ft
- Measuring principle: time domain reflectometer
- 20 pre-set cable types

This clamp meter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp meter.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
- Incl. ISO Calibration Certificate

This clamp on tester was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp on tester.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
- Incl. ISO Calibration Certificate

- Noise level range: Auto 30 ... 130 dB
- Resolution: 0.1dB
- Accuracy: ±1.4dB
- Frequency range: 31.5 Hz...8 kHz
- Frequency Rating: A and C
- Data interface: USB, Bluetooth 4.0
- Free app
- Accuracy class: IEC61672-1 Class 2