The flat miniature force gage has a height of only 4 mm. With a diameter of 12 mm, this miniature force gauge is very compact. This force gauge achieves a measurement uncertainty of only 0.5%. 

• Rated load / force F.S.: 5-50 kg / 50-500 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force sensor nominal load selectable!

The flat miniature Force Gage has a height of only 11 mm. With a diameter of 20 mm, this miniature Force Gage is very compact. This Force Gage achieves a measurement uncertainty of only 0.5%. 

• Rated load / force F.S.: 5-2000 kg / 50 N - 20 kN
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gage nominal load selectable!

A Force Gage made of stainless steel with a measurement uncertainty of only 0.5%. With the dimensions of Ø 13 mm and a height of 7 mm, the Force Gage is very versatile. 

• Rated load / force F.S.: 5-100 kg / 50-1000 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gage nominal load selectable!

The force gage measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our force gages.

Dynamometer PCE-DFG N 5K

• Measuring range: 0 … 5000 N / 500 kg / 1100 lbs
• Resolution: 1N / 0.22 lbs
• Accuracy: ± 0.1% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic displayTest Stand PCE-MTS500
• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel path: max. 300 mm / 11.8"
• Feed speed: 30 mm/min … 230 mm/min / 1.18 … 9.05 in/min

Thanks to its small dimensions, the miniature Force Gage is easy to use on hard-to-reach measuring points. The height in particular is something special with this Force Gage. With a diameter of only 10 mm, this Force Gage is smaller in diameter than a 1 cent coin.

• Rated load / force F.S.: 5-100 kg / 50-1000 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gage nominal load selectable!

The miniature Force Gage can be used in many applications due to its compact dimensions. With a small force application surface, the miniature force transducer enables force measurement at small contact surfaces.

• Rated load / force F.S.: 10-50 kg / 100-500 N
• Limit load / force: 150 %
• Breaking load / force: 200 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gage nominal load selectable!