Products for 'Draaimomentmeter PCE FB 2TW '

83,90 €

Price excl. VAT &. delivery

The hygrometer PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the hygrometer PCE-HT 72 to use up to several months. The PCE-HT 72 hygrometer is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Panel Meter PCE-N25S

84,90 €

Price excl. VAT &. delivery

The panel meter is used for processing standardised signals. Depending on your specific needs, the panel meter can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the panel meter is freely scalable, which increases its application possibilities.

IP65 protected at the front
6 different standardised signal inputs available
configuration via software
5-digit LED display

Voltmeter PCE-CBA 20

80,90 €

Price excl. VAT &. delivery

The Voltmeter tests 12V and 24V starter batteries. The voltmeter checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling.

Measurement object: 12V / 24V starter batteries
Battery standards: DIN, JIS, EN, SAE
Power supply: 9 … 35V DC via test voltage

Voltmeter PCE-DC1

76,90 €

Price excl. VAT &. delivery

Mini Voltmeter for measuring AC current, AC voltage, DC current and frequency.

AC current (50/60 Hz): 200 A / 0.1 A or 100 mA / ±3.0% + 8 digits
DC current: 200 A / 0.1 A or 100 mA / ±2.8% + 8 digits
AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

Manometer PCE-MPM 10

84,90 €

Price excl. VAT &. delivery

The manometer is a small and handy measuring device for determining the differential air pressure. The manometer has a measuring range of ±5000 Pa. The manometer is connected via two hose connections with a diameter of 8 mm.

Measuring range: ±5000 Pa
11 different pressure units:Pa, hPa, mBar, mmH2O, mmHg, inH2O, inHg, psi, ozin², bar, kPa
Medium: gaseous
Zero point calibration

Manometer PCE-PME 10

84,90 €

Price excl. VAT &. delivery

The digital Manometer is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The Manometer is suitable for measuring non-aggressive and non-explosive gases.

measurement range -10 ... +10 kPa (-100 ... +100 mbar)
resolution 0.01 kPa
accuracy: ±1 % FS
MAX, MIN, AVG value, HOLD
audible alarm
13 selectable pressure units
USB-C with data transfer
PC software

Clamp on Tester PCE-DC1

76,90 €

Price excl. VAT &. delivery

Clamp on Tester for measuring AC current, AC voltage, DC current and frequency. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. The Clamp on Tester (as all the test instruments) comes manufacturer calibrated - ISO certification is available as an option.

AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
DC current: 200 A / 100-mA / ±2.8% + 8 digits
AC test voltage (without contact):100 VAC to 600 VAC at 50 / 60 Hz
Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz / 0.51 to 1 kHz

HVAC Meter PCE-DC1

76,90 €

Price excl. VAT &. delivery

The HVAC Meter has been designed to detect, indirectly, AC/DC current and frequency. The HVAC Meter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
DC current: 200 A / 100-mA / ±2.8% + 8 digits
AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

Current Clamp PCE-DC1

76,90 €

Price excl. VAT &. delivery

The Current Clamp has been designed to detect, indirectly, AC/DC current and frequency. The Current Clamp has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

AC current (50/60 Hz): 200 A / 100-mA / ±3.0% + 8 digits
DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz