Our Moisture Meter was specially developed for light and bulky materials. maximum weighing capacity of 400 g, a sample volume of 360 cm³ and a high measuring resolution of 0.001 g, it guarantees precise and reliable moisture measurements. The Moisture Meter works on the principle of drying with simultaneous weight recording whereas the weight loss is continuously measured and displayed as a percentage of the total mass.

• weighing range: 0 ...400 g
• resolution: 0.001 g
• absolute moisture: 0 ... 100 %
• resolution: 0.01 %
• heating temperature: 105 ... 360 °C
• % moisture
• % dry matter
• % moisture bd
• g residual weight / kg
• residual weight
• data interface: RS232, USB, V24
• GLP data management
• Data Bridge software (optional)

Our Moisture Meter is a precise device for determining dry matter content in samples. It is suitable for applications in raw material extraction, production, processing, storage, trade, research and recycling. With a maximum sample weight of 200 g and a high resolution of 0.001 g, the Moisture Meter enables exact measurements of the moisture content and the ash residue.

• weighing range: 0 ... 200 g
• resolution: 0.001 g
• absolute moisture: 0 ... 100 %
• resolution: 0.01 %
• heating temperature: 105 ... 600 °C
• % moisture
• % dry matter
• % moisture bd
• g residual weight / kg
• residual weight
• % residue on ignition
• % loss on ignition
• data interface: RS232, USB, V24
• GLP data management
• Data Bridge software (optional)
• with built-in printer

• Weighing range: 0 ...400 g
• Resolution: 0.001 g
• Absolute moisture: 0 ... 100 %
• Resolution: 0.01 %
• Heating temperature: 105 ... 360 °C
• % moisture
• % dry matter
• % moisture ATRO
• g Residual weight / kg
• Residual weight
• Data interface: RS232, USB, V24
• GLP data management
• Data Bridge software (optional)
• incl. ISO-Calibration Certificate

Our Moisture Meter is a high-precision device that has been specially plaster / gypsum analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.001 g, it enables exact and reliable moisture measurements. The Moisture Meter works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass.

• weighing range: 0 ... 220 g
• resolution: 0.001 g
• absolute moisture: 0 ... 100 %
• resolution: 0.01 %
• heating temperature 1: 40 ... 180 °C
• heating temperature 2: 105 ... 360 °C
• % moisture
• % dry matter
• % moisture bd
• g residual weight / kg
• residual weight
• data interface: RS232, USB, V24
• GLP data management
• Data Bridge software (optional)

Our Moisture Meter is a special device for temperature-insensitive materials with drying temperature of up to 360 °C. It is ideal for applications in raw material extraction, production, processing, research and recycling, as well as especially for building materials such as cement, concrete and gravel and the chemical industry, including powders, granulates and pastes. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, our Moisture Meter enables precise moisture measurement.

• weighing range: 0 ... 220 g
• resolution: 0.001 g
• absolute moisture: 0 ... 100 %
• resolution: 0.01 %
• heating temperature: 105 ... 360 °C
• % moisture
• % dry matter
• % moisture bd
• g residual weight / kg
• residual weight
• data interface: RS232, USB, V24
• GLP data management with Data Bridge
• software (optional)
• with built-in printer

The FMD 6 is a handy and versatile wood moisture meter for reliable measurement of the moisture content of paper, wood and construction materials. The wood moisture meter has preset characteristic curves for the moisture measurement of specific materials. 

• Measuring range:
  5-99% for wood / 0-99% for building materials
• Resolution: 0.1%
• Accuracy: ±0.2%
• Memory stores up to 1,000 measurement values
  for transfer to PC using  included software

• Weighing range: 0 ... 220 g
• Resolution: 0.001 g
• Absolute moisture: 0 ... 100 %
• Resolution: 0.01 %
• Heating temperature 1: 40 ... 180 °C
• Heating temperature 2: 105 ... 360 °C
• % moisture
• % dry matter
• % moisture ATRO
• g Residual weight / kg
• Residual weight
• Data interface: RS232, USB, V24
• GLP data management
• Data Bridge software (optional)
• with built-in printer
• incl. ISO-Calibration Certificate

• wet and dry density, % compaction, % moisture
• measuring depth: 50 ... 300 mm
• measurement within 5 seconds
• internal data memory for 4200 values
• status bar for GPS signal, memory and battery
• 5-inch touch screen
• location determination via GPS
• software
• standard(s) ASTM D4318, ASTM D422, ASTM D4698, ASTM D1557

The Wood Moisture Meter is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The Wood Moisture Meter determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw.

• Fast moisture control
• Electrical resistance method
• For biomasses:
  such as straw, hay, sawdust, etc.
• Sample size up to approx. 120 cm³