PCE-HT 225E is a durometer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• Data processing software included

PCE-HT 225E is a hardness test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• Data processing software included

PCE-HT 225E is a material test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• Data processing software included

PCE-HT 225E is a concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• Data processing software included

PCE-HT 225E is a roll hardness test hammer, also called a rolled paper rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with rolled paper, concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• Data processing software included

PCE-HT 225E is a surface testing concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• Data processing software included

The Anemometer PCE-WSAC 50-120 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 0 … 10 V
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

Concrete tester / concrete measuring device, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• Data processing software included

The Air Flow Meter PCE-WSAC 50-120 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 0 … 10 V
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The Air Velocity Meter PCE-WSAC 50-120 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

• Wind measuring device with adjustable alarms
• 2 alarm types
• Supply voltage: 230 V AC
• Input signal: 0 … 10 V
• Sensor supply via evaluation device
• Degree of protection: IP66
• Incl. ISO calibration certificate

The motorized tension-compression Universal Testing Machine is a motorized test station with a force range of up to 500 N. With the help of the horizontal Universal Testing Machine, it is possible to to carry out tension-compression tests.

• Force range: 500 N / 50 kg / 110 lb
• Distance display resolution: 0.02 mm
• Resolution: 1 mm/min
• Tensile and compression testing
• Travel: 270 mm / 10.6"

The PCE-HT-75 durometer for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This durometer in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.

• Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
• Measuring range: 10 … 70 N/mm²
• Energy: 0.735 J / 0.54 ft-lbs
• Low strength concrete testing or Type L
• Indication of measurement: 0 to 100 (without dimensions)
• Maximum thickness of concrete (of the material): 70 cm