Surface Testing - Ultrasonic Thickness Gauge PCE-FD 20
4.598,90 €
Price excl. VAT &. delivery

PCE-FD 20 is a portable ultrasonic tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


  • Operating frequency range: 1 … 10 MHz
  • Measured time interval range: 6 … 1000 microseconds (µs)
  • Sound velocity: 1000 … 9999 m/s 

Ultrasonic Thickness Gauges PCE-FD 20
4.598,90 €
Price excl. VAT &. delivery

PCE-FD 20 is a portable ultrasonic thickness gauges or ultrasonic wall thickness gauges with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based ultrasonic thickness gauges uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


  • Operating frequency range: 1 … 10 MHz
  • Measured time interval range: 6 … 1000 microseconds (µs)
  • Sound velocity: 1000 … 9999 m/s

Ultrasonic Thickness Gauge PCE-FD 20
4.598,90 €
Price excl. VAT &. delivery

PCE-FD 20 is a portable ultrasonic tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


  • Operating frequency range: 1 … 10 MHz
  • Measured time interval range: 6 … 1000 microseconds (µs)
  • Sound velocity: 1000 … 9999 m/s 

Surface Testing - Ultrasonic Thickness Gauge PCE-UFD 50
2.685,90 €
Price excl. VAT &. delivery
The surface testing - ultrasonic thickness gauge is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the surface testing - ultrasonic thickness gauge considerably easier.

  • Test range: 0 … 10000 mm
  • Pulse shift: -20 … +3400 µs
  • Single or dual probe measurement
  • AVG and DAC evaluation methods
  • Speed of sound 1000 … 15000 m/s
  • USB interface and software
  • Memory for up to 100 data records
Ultrasonic Thickness Tester PCE-FD 20
4.598,90 €
Price excl. VAT &. delivery

PCE-FD 20 is a portable ultrasonic thickness tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


  • Operating frequency range: 1 … 10 MHz
  • Measured time interval range: 6 … 1000 microseconds (µs)
  • Sound velocity: 1000 … 9999 m/s 

Surface Testing - Conductivity Meter for Metals PCE-COM 20
5.879,90 €
Price excl. VAT &. delivery

PCE-COM 20 is a portable handheld non-destructive surface testing - conductivity meter for metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

  • Operating frequency: 60 kHz
  • Sine wave probe: Ø 14 mm / ≈ 0.55 in
  • Memory: Up to 500 groups of measurements
  • Lift-off and temperature compensation
  • Automatic calibration

Ultrasonic testing device PCE-FD 20
4.598,90 €
Price excl. VAT &. delivery

PCE-FD 20 is a Ultrasonic testing device or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


  • Operating frequency range: 1 … 10 MHz
  • Measured time interval range: 6 … 1000 microseconds (µs)
  • Sound velocity: 1000 … 9999 m/s 

 

Ultrasonic Thickness Gauges PCE-UFD 50
2.685,90 €
Price excl. VAT &. delivery
The ultrasonic thickness gauges is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the ultrasonic thickness gauges considerably easier.

  • Test range: 0 … 10000 mm
  • Pulse shift: -20 … +3400 µs
  • Single or dual probe measurement
  • AVG and DAC evaluation methods
  • Speed of sound 1000 … 15000 m/s
  • USB interface and software
  • Memory for up to 100 data records
Surface Testing - Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Cal.
6.034,90 €
Price excl. VAT &. delivery
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive surface testing - conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

  • Operating frequency: 60 kHz
  • Sine wave probe: Ø 14 mm / ≈ 0.55 in 
  • Memory: Up to 500 groups of measurements
  • Lift-off and temperature compensation
  • Automatic calibration
  • incl. ISO Calibration Certificate