• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

The stainless steel immersion pressure / fill level sensor is suitable for measuring the level in the process. The immersion probe is particularly suitable for level measurement of waste water, contaminated or highly viscous media.

• Nominal pressures up to 200 mH2O
• Accuracy ± 0.35% of the measuring range
• 39.5 mm diameter
• Suitable for drinking water production
• Ceramic sensor
• Suitable for dirty and viscous media
• Different configurations possible

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

The pressure gauge PCE-P50-ICA with highest accuracy and best performance. With this pressure gauge you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure gauge is ideal for use in industry, in service and in the laboratory.

• Range: ± 6900mbar / ± 100 psi
• Resolution: 4mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

The pressure meter PCE-P50-ICA with highest accuracy and best performance. With this pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure meter is ideal for use in industry, in service and in the laboratory.

• Range: ± 6900mbar / ± 100 psi
• Resolution: 4mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

The differential pressure meter PCE-P50-ICA with highest accuracy and best performance. With this differential pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The differential pressure meter is ideal for use in industry, in service and in the laboratory.

• Range: ± 6900mbar / ± 100 psi
• Resolution: 4mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

The pressure gauge records the air temperature as well as the relative humidity and the barometric pressure and saves them internally on an SD card. The compact device with a large memory (up to max. 16 GB SDHC card) is primarily used for long-term registration in the food sector (refrigerated counters in department stores, refrigerated transports, warehouses) as well as for measurement and recording in industry (heating and cooling processes, machine temperatures, product storage, etc.).

Measuring ranges

• Temperature: 0 … 50 °C /  32 … 122 °F
• Relative humidity: 10 … 90% r.h.
• Barometric pressure: 10 … 1100 hPa (mbar)
• Selectable pressure unit: hPa, mmHg and inHg
• Real-time data storage
• incl. ISO Calibration Certificate

PCE-910 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
• Resolution: 100 Pa / 0.0145 psi / 0.001 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory
• Incl. ISO calibration certificate

PCE-910 is a portable handheld digital differential pressure meter, gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
• Resolution: 100 Pa / 0.0145 psi / 0.001 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory
• Incl. ISO calibration certificate

The pressure gauge PCE-P15-ICA with highest accuracy and best performance. With this pressure gauge you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure gauge is ideal for use in industry, in service and in the laboratory.

• Range: ± 1000mbar / ± 15 psi
• Resolution: 1mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

The pressure gauge PCE-P30-ICA with highest accuracy and best performance. With this pressure gauge you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure gauge is ideal for use in industry, in service and in the laboratory.

• Range: ± 2000mbar / ± 30 psi
• Resolution: 2mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

The IoT sensor measures α-,β-,γ- and X-rays and offers a high measurement accuracy and convenient design. Using the integrated Bluetooth interface in the IoT sensor, the measured values can be sent in real time to a PC and analyzed with the included software.

• Α-,β-,γ-and X-rays
• Bluetooth interface
• Internal memory
• Software Included

The pressure meter PCE-P15-ICA with highest accuracy and best performance. With this pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure meter is ideal for use in industry, in service and in the laboratory.

• Range: ± 1000mbar / ± 15 psi
• Resolution: 1mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

The pressure meter PCE-P30-ICA with highest accuracy and best performance. With this pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The pressure meter is ideal for use in industry, in service and in the laboratory.

• Range: ± 2000mbar / ± 30 psi
• Resolution: 2mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

PCE-910 is a portable handheld digital differential pressure meter, gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
• Resolution: 100 Pa / 0.0145 psi / 0.001 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory
• Incl. ISO calibration certificate

The differential pressure meter PCE-P15-ICA with highest accuracy and best performance. With this differential pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The differential pressure meter is ideal for use in industry, in service and in the laboratory.

• Range: ± 1000mbar / ± 15 psi
• Resolution: 1mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

The differential pressure meter PCE-P30-ICA with highest accuracy and best performance. With this differential pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The differential pressure meter is ideal for use in industry, in service and in the laboratory.

• Range: ± 2000mbar / ± 30 psi
• Resolution: 2mbar
• Accuracy: ± 0.3% of full scale
• RS-232 interface
• Handheld measuring device
• Incl. ISO calibration certificate

• Measurement range: 0 … 500 °C / 32 … 932 °F
• Accuracy: ± 1.5 °C or ± 1 %
• Optical resolution: 15:1
• Output signal: 4 … 20-mA standard signal
• For fixed installation (mounting bracket incl.)
• incl. ISO Calibration Certificate

The Barometric Pressure Meter records the air temperature as well as the relative humidity and the barometric pressure and saves them internally on an SD card. The compact device with a large memory (up to max. 16 GB SDHC card) is primarily used for long-term registration in the food sector (refrigerated counters in department stores, refrigerated transports, warehouses) as well as for measurement and recording in industry (heating and cooling processes, machine temperatures, product storage, etc.).

Measuring ranges

• Temperature: 0 … 50 °C /  32 … 122 °F
• Relative humidity: 10 … 90% r.h.
• Barometric pressure: 10 … 1100 hPa (mbar)
• Selectable pressure unit: hPa, mmHg and inHg
• Real-time data storage
• incl. ISO Calibration Certificate

• radiation: 0 µSv/h ... 9999.9 µSv/h
• resolution: 0.001 µSv/h
• accuracy: <10 % of Rd
• units µSv and mrem
• pulse counting in cps and cpm
• 32 GB memory with data logger
• adjustable alarm

The sound sensor consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the sound sensor is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (night clubs, public festivals, kart tracks …).

• Measuring range: 30 … 130 dB in three ranges
• Resolution: 0.1 dB
• Power supply: 24 V DC
• Relay output and control output
• Handle and wall bracket
• Analog output signal
• incl. ISO Calibration Certificate