• pH electrode (refillable)
• Measuring range: 0 ... 14 pH
• Diameter: 7 mm
• Temperature range: 0 ... 70 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application: General applications (liquids)

Additional small air flow meter KWG 1 for PCE-Wind logger. Cup anemometer with impulse output.

• Output: 0… 100 Hz
• Measurement reading range: 0.9 … 40 m/s
• Accuracy: ± 0.5 m/s or 5 % v. M

The digital panel meter is used for processing signals coming from temperature sensors. Depending on your specific needs, the panel meter can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the panel meter is freely scalable, which increases its application possibilities.

• IP65 protected front
• For thermocouples and resistance thermometers
• Configuration via software
• 5-digit LED display

The power indicator is used for the signal processing of 4 .. 20 mA. The power indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The panel meter is used for the signal processing of 4 .. 20 mA. The panel meter has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The frequency indicator is used for the signal processing of 4 .. 20 mA. The frequency indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The panel indicator is used for the signal processing of 4 .. 20 mA. The panel indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The pressure indicator is used for the signal processing of 4 .. 20 mA. The pressure indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The process indicator is used for the signal processing of 4 .. 20 mA. The process indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The voltage indicator is used for the signal processing of 4 .. 20 mA. The voltage indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

• Sound level: 35 ... 130 dBA
• Air velocity: 0.5 ... 30 m/s
• Volume flow: 150 ... 9000 CMM
• Light intensity: 0 ... 200 klux
• Temperature: -20 ... 60°C / -4 ... 140°F
• Humidity: 35 ... 80% r. h.
• Adjustable alarm for lux measurement
• Colored bar display

The digital temperature indicator is used for processing signals coming from temperature sensors. Depending on your specific needs, the temperature indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the temperature indicator is freely scalable, which increases its application possibilities.

• IP65 protected front
• For thermocouples and resistance thermometers
• Configuration via software
• 5-digit LED display

The temperature indicator is used for the signal processing of  4…20 mA. The temperature indicator offers a wide field of application due to the fact that its signal can be freely scaled. The temperature indicator has a 5-digit LED display to allow the user to directly read current measured values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The PCE-HT 71N Environmental Tester detects air temperature and humidity and stores readings in its internal memory. The Environmental Tester has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a Environmental Tester in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

• Measurement range: 0 … 100% RH / -35 … 70°C / -31 … 176°F
• Accuracy: ± 3% RH (20 … 80%) and  ± 5% / ± 1°C (1.8°F)
• Resolution: 0.5% RH / 0.1°C (0.18°F)
• Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

The HVACR tester detects air temperature and humidity and stores readings in its internal memory. The HVACR tester has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a HVACR tester in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

• Measurement range: 0 … 100% RH / -35 … 70°C / -31 … 176°F
• Accuracy: ± 3% RH (20 … 80%) and  ± 5% / ± 1°C (1.8°F)
• Resolution: 0.5% RH / 0.1°C (0.18°F)
• Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

PCE-IR 100 is both an infrared thermometer for measuring surface temperature and a contact thermometer with probe for measuring core temperature of food. This food-grade thermometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.

• Infrared temperature range: -33 … +250 ºC / -27 … 428 ºF
• Probe temperature range: -55 … 330 ºC / -67 … 626 ºF
• Resolution: 0.2 ºC / 0.36 ºF
• IP 65 ingress protection rating allows hygienic cleaning

• 2-channel Digital Multimeter
• bandwidth: 10 MHz, sampling rate: 50 MS/s
• voltage: 0 ... 1000 V DC, 0 ... 750 V AC
• current: 0 ... 9.999 A AC/DC
• resistance, capacitance, temperature
• non-contact voltage detection
• signal generator: 1 Hz ... 2 MHz