Products for 'NDT Tester PCE GM 55 ICA incl. ISO Calibration Certificate '

999,90 €

Price excl. VAT &. delivery

The NDT tester PCE-GM 55 is a 3-angle gloss meter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the NDT tester to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

Range : 0 … 200 gloss units / highlights
Accuracy: ± 1 gloss units
Repeatability: ± 0.5 gloss units
Optical angle: 20°, 45°, 75°
For medium and high gloss
Measurements on textiles and paper possible

NDT Test Instruments PCE-COM 20-ICA incl. ISO Calibration Certificate

6.034,90 €

Price excl. VAT &. delivery

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

NDT Tester - Gloss Meter PCE-GM 80-ICA incl. ISO Calibration Certificate

756,90 €

Price excl. VAT &. delivery

The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

Measurement geometry: 60°
Measuring range up to 1000 GU
Measuring surface: Ø 4.5 mm
Data storage: 1245 measured values
Interface: Micro USB
Incl. ISO calibration certificate

NDT Tester - Gloss Meter PCE-GM 75-ICA Incl. ISO Calibration Certificate

619,90 €

Price excl. VAT &. delivery

The NDT tester - gloss meter has a measuring surface of Ø 4.5 mm. Thanks to this small measuring surface, the gloss meter enables measurements on particularly small surfaces. With a maximum inaccuracy of 1%, the gloss meter is a high-precision measuring instrument for fast and easy measurements on surfaces.

Measuring range up to 1000 GU
For measurements on small surfaces
Precise measurements thanks to high accuracy
Micro-USB interface for the PC connection
Data memory for later evaluations
Data memory: 1,245 measured values- Incl. ISO calibration certificate

Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate

6.034,90 €

Price excl. VAT &. delivery

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate

6.034,90 €

Price excl. VAT &. delivery

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration
incl. ISO Calibration Certificate

Gloss Meter PCE-GM 55

999,90 €

Price excl. VAT &. delivery

The Gloss Meter PCE-GM 55 is a 3-angle glossmeter. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the gloss meter to be used for gloss measurements in the high gloss and medium gloss ranges. The special measuring angle of 75° allows, among other things, measurements of the degree of gloss on paper and textiles.

Range : 0 … 200 gloss units / highlights
Accuracy: ± 1 gloss units
Repeatability: ± 0.5 gloss units
Optical angle: 20°, 45°, 75°
For medium and high gloss
Measurements on textiles and paper possible

NDT Tester - Gloss Meter PCE-GM 60Plus-ICA incl. ISO calibration certificate

566,90 €

Price excl. VAT &. delivery

The PCE-GM 60Plus NDT tester or gloss meter is a portable handheld 60 degree gloss meter. This coating and paint gloss meter measures the gloss units (GU) on a material's surface. The rechargeable gloss meter or gloss tester uses reflected light for gloss measurement per ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.

Measuring geometry: 60° degree angle
Measuring range: 0 … 200 GU
Measuring accuracy ±1.5 GU
3.5" TFT touchscreen display
Light source: D65
Wave length: 400-700 nm
Incl. ISO calibration certificate

NDT Tester - Surface Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate

1.668,90 €

Price excl. VAT &. delivery

The coating thickness NDT Tester - surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the NDT tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate