• 3 high-power UVA LEDs
• light colour: 380 ... 390 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift: -360 ° ... +360 °
• quick setting using x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

• 3 bright high-power LEDs
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• 6160 lux at 30 cm / 1000 Hz
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment using x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

• 3 high-power UVA LEDs
• light colour: 380 ... 390 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift: -360 ° ... +360 °
• quick setting using x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

• 3 bright high-power LEDs
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• 6160 lux at 30 cm / 1000 Hz
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment using x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

• 3 bright high-power LEDs
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• 6160 lux at 30 cm / 1000 Hz
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment using x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

The multifunction pH meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction pH meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

• Measuring range: pH value: 0.00 … 14.00 pH
• Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
• TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
• Oxygen: 0 … 20.0 mg/l 
• Temperature: 0 … 60.0 °C / 32 … 140 ºF
• 2 point calibration, pH4 + pH7

The Multifunction Conductivity Meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction conductivity meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

• Measuring range: pH value: 0.00 … 14.00 pH
• Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
• TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
• Oxygen: 0 … 20.0 mg/l 
• Temperature: 0 … 60.0 °C / 32 … 140 ºF
• 2 point calibration, pH4 + pH7

FME is a handheld multifunction moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.

• Measuring range: 5-99% for wood / 0-99% for building materials
• Resolution: 0.1%
• Accuracy: ±0.2%