PCE-MFM 3000 is a handheld electromagnetic radiation detector or gauss meter that detects both static (DC) permanent magnet (rare earth) magnetic and dynamic (AC) electromagnetic fields (EMFs) and displays measurement results in gauss (G) or milli Tesla (mT). This portable magnetic field measuring device comes with an external sensor and features an RS-232 port for downloading data to a PC.

• Measurement range: 0 … 30,000 Gauss DC fields, 0 … 15,000 Gauss AC 50/60 Hz fields
• Accuracy: ± 5%; + 20 digits (static) / + 10 digits (dynamic)
• Resolution: 0.1 G / 0.01 mT
• Measures both AC (50/60 Hz) and DC magnetic fields, permanent magnets are DC fields 
• Single axis Hall sensor (Transverse)with auto temp. compensation
• Incl. ISO calibration certificate

The PCE-VA 20-SET is a multi-functional humidity detector including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• incl. ISO Calibration Certificate

PCE-WMM 50-ICA is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.

• CO2 gas measurement range: 0 … 50,000 ppm
• Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
• IP54-rated enclosure on sensor and remote display units
• 2 adjustable alarm thresholds
• 3- to 4-digit remote display (depends on range)
• incl. ISO Calibration Certificate

PCE-WMM 50-ICA is a wall-mounted carbon dioxide gas leak detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor carbon dioxide gas leak detector features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.

• CO2 gas measurement range: 0 … 50,000 ppm
• Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
• IP54-rated enclosure on sensor and remote display units
• 2 adjustable alarm thresholds
• 3- to 4-digit remote display (depends on range)
• incl. ISO Calibration Certificate

PCE-MFM 3000 is a handheld environmental electromagnetic field detector or gauss meter that detects both static (DC) permanent magnet (rare earth) magnetic and dynamic (AC) electromagnetic fields (EMFs) and displays measurement results in gauss (G) or milli Tesla (mT). This portable magnetic field measuring device comes with an external sensor and features an RS-232 port for downloading data to a PC.

• Measurement range: 0 … 30,000 Gauss DC fields, 0 … 15,000 Gauss AC 50/60 Hz fields
• Accuracy: ± 5%; + 20 digits (static) / + 10 digits (dynamic)
• Resolution: 0.1 G / 0.01 mT
• Measures both AC (50/60 Hz) and DC magnetic fields, permanent magnets are DC fields 
• Single axis Hall sensor (Transverse)with auto temp. compensation
• Incl. ISO calibration certificate

PCE-123 is a multifunction calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multifunction calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multifunction calibrator useful in a wide range of applications.

• DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
• DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
• K, J, E, T type thermocouples (°C or °F)
• Frequency: 1 - 62,500 Hz
• Incl. ISO Calibration Certificate

PCE-123 is a current calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use current calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the current calibrator useful in a wide range of applications.

• DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
• DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
• K, J, E, T type thermocouples (°C or °F)
• Frequency: 1 - 62,500 Hz
• Incl. ISO Calibration Certificate

PCE-123 is a process calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use process calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the process calibrator useful in a wide range of applications.

• DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
• DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
• K, J, E, T type thermocouples (°C or °F)
• Frequency: 1 - 62,500 Hz
• Incl. ISO Calibration Certificate