Humidity detector for waste paper. The humidity detector can detect absolute humidity in waste paper in order to determine the exact humidity content in the collection centre or in the paper-making factory. All test instruments come manufacturer calibrated. ISO certification can be ordered as an option.

• Test / Measurement range: 6 … 30 %
• Resolution: 0.1 %
• Accuracy: ±10 % of the measurement value
• Long probes
• Accurate measurement

• 3 high-power UVA LEDs
• light colour: 380 ... 390 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift: -360 ° ... +360 °
• quick setting using x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode

PCE-WMH-3 is a portable handheld digital humidity detector used to measure the moisture content of wood. This hammer-style humidity detector features preset characteristic curves for measuring moisture in 270 different wood types.

• Measuring range: 6 … 60 % moisture content
• Accuracy: ±1 % (within 6 … 12 % range), ±2 % (13 … 28 %), ±2 % (29 … 60 %)
• Resolution: 0.1 %

PCE-MFM 3000 is a handheld electromagnetic radiation detector or gauss meter that detects both static (DC) permanent magnet (rare earth) magnetic and dynamic (AC) electromagnetic fields (EMFs) and displays measurement results in gauss (G) or milli Tesla (mT). This portable magnetic field measuring device comes with an external sensor and features an RS-232 port for downloading data to a PC.

• Measurement range: 0 … 30,000 Gauss DC fields, 0 … 15,000 Gauss AC 50/60 Hz fields
• Accuracy: ± 5%; + 20 digits (static) / + 10 digits (dynamic)
• Resolution: 0.1 G / 0.01 mT
• Measures both AC (50/60 Hz) and DC magnetic fields, permanent magnets are DC fields 
• Single axis Hall sensor (Transverse)with auto temp. compensation
• Incl. ISO calibration certificate

PCE-WMM 50-ICA is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.

• CO2 gas measurement range: 0 … 50,000 ppm
• Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
• IP54-rated enclosure on sensor and remote display units
• 2 adjustable alarm thresholds
• 3- to 4-digit remote display (depends on range)
• incl. ISO Calibration Certificate

The PCE-DDA 10 Shore A durometer is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).

• Portable handheld digital device
• For Shore A hardness testing
• Single and serial measurements
• Data transfer to PC

• Measuring range: 0 … 10 m / 0 … 32.8 ft
• Accuracy: 0.5%
• Resolution: 0.001 m
• With display for setting and reading
• Stable M60 connection thread
• incl. external digital display PCE-N24S:
• Voltage supply: selectable
• Input signal: selectable
• Display: 4 digits, red
• Digit height: 20 mm / 0.78"