• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN80 (72 ... 80 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN80 (83 ... 91 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN65 (59 ... 67 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN65 (72 ... 80 mm)

• Flow velocity: 0.01 ... 10 m/s
• Accuracy: 1.5% v.Mw.
• Volume flow calculation
• Extension rods and directional vane
• Adjustable timer
• Sensor with 5 m / 16.4 ft cable

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN50 (46 ... 54 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN50 (59 ... 67 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN40 (35 ... 43 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN40 (46 ... 54 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN32 (28 ... 36 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN32 (35 ... 43 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN25 (21 ... 29 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN25 (28 ... 36 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN20 (21 ... 29 mm)

• measurement range: 0 ... 160 km/h
• accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
• 5 m cable with 4-pin M12 connection
• RS485 Modbus RTU communication
• measurement of wind speed and direction
• protection class IP65 for outdoor areas

The Flow Meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The Flow Meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The PCE-VA 20-SET is a multi-functional air flow meter including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• Incl. ISO Calibration Certificate

The PCE-HVAC 2 is a Flow Meter that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile Flow Meter. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter
• Includes ISO calibration certificate

Compact air flow meter for weather monitoring. Basic air flow meter with 4 … 20 mA output. Measurement of the horizontal wind direction with an analogue output signal. The wind vane is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 360°
• Output signal: 4 … 20 mA
• Assembly: pipe assembly / assembly via PG screw connection
• Heating: yes

The PCE-VA 20 is a versatile multifunction air flow meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±  (3% of measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1
• Incl. ISO Calibration Certificate

This flow meter is very economical. With this flow meter you can measure wind speed and air temperature.

• Speed measurement up to 45 m/s or 100 mph
• Wind speed: 0.01 m/s, accuracy ±3% ±0.1
• Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
• Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
• Incl. ISO calibration certificate

PCE-VA 20-SET is a multifunction air flow meter with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the air flow device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3" Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)

The Flow Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.

• Air speed range: 0.4 … 30 m/s / 0.9 … 67 mph
• Air flow range: 0 … 9999 CFM / CMM
• Air temperature range: -10 … 60°C / 14 … 140°F
• IR temperature range: -50 … 500°C / -58 … 932°F
• USB interface
• Incl. ISO Calibration Certificate

The air flow meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the air flow meter can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement
• incl. ISO Calibration Certificate (wind speed function only)

Air flow meter with 4 … 20 mA output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the air flow meter is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 4 … 20 mA
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Air flow meter with 0 … 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

• Output signal: 4 … 20-mA  
• Operating voltage: 12 … 36V DC
• Measurement reading range: 0.5 m/s … 50 m/s (1.1 … 111.8 mph)