• torque: 0.1 ... 2000 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

With the PCE-DLT 10 test stand, the water vapour resistance of samples is tested according to AMK-MB-005 Issued on 04/2015 Humidity and Climatic Resistance Test Module 1 (water vapour loading).

• Steam test according to AMK-MB-05
• Max. 5 test specimens
• Automatic test sequence with constant temperature
• Data logger
• Determination of moisture expansion
• Checking of joint formation and edge release

• torque: 0.01 ... 500 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

• torque: 0.01 ... 100 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• incl. software
• incl. force gauge PCE-DFG N 5K (0 … 5000 N)
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

• temperature range: 5 ... 1000 °C
• resolution: 0.01 °C
• accuracy: ±5 °C
• 8-inch capacitive touch screen
• cylindrical heating chamber
• programmable temperature control
• measures according to ISO 3451 and GB / T9345.1-2008

• measurement range: 0 ... 500 N
• resolution: 0.1 N
• accuracy: ±0.05 % FS
• sampling rate: 2 ... 100 Hz
• traverse speed: 100 mm/min, 300 mm/min
• traverse distance: 150 mm 
• Measurable edge thickness: 0.4...3.5 mm
• Measurable board thickness: 10...64 mm
• graphical display
• data logger

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***