Products for 'pce hvac 2' | PCE Instruments

5.906,90 €

Price excl. VAT &. delivery

PCE-5000 is a Ultrasonic testing device that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
Memory size: 1,000 groups for measurement data and 20 groups for calibration data
Different probe types (also automatic motorized probes) available

Ultrasonic testing device PCE-LDC 15

3.849,90 €

Price excl. VAT &. delivery

The Ultrasonic testing device is used in various areas of industry. For example, the Ultrasonic testing device is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

Working frequency: 40 kHz (± 2 kHz)
Operating time: >10 hours
Various attachments
Color display: 3.5" touch panel TFT
Soundproof headphones

Ultrasonic testing device PCE-UCD 100

5.249,90 €

Price excl. VAT &. delivery

The Ultrasonic testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this Ultrasonic testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative Ultrasonic testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

Measurement range: -1677700 µs to +1677700 µs
Resolution: 0.05 µs
Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
Includes a camera for measuring crack width
Bandwidth: 1 to 500 kHz
Display: 10.1" TFT touchscreen display
Internal storage: 8 GB

Ultrasonic testing device PCE-TDS 200+ MR incl. ISO Calibration Certificate

3.559,90 €

Price excl. VAT &. delivery

The Ultrasonic testing device has a measuring range of ±32 m/s. To perform flow measurement with the Ultrasonic testing device, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameters DN 50 … 700 / 57 … 720 mm
Temperature resistance: -30 … 160 °C
Temperature measurement up to 1800 °C
for different media
for different pipe materials
Measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 32 GB memory capacity (10 million measuring points)

LiPo battery
incl. ISO Calibration Certificate

Ultrasonic testing device PCE-UFM 15

929,90 €

Price excl. VAT &. delivery

With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN15 / 1/2" and various pipe materials such as steel, copper, aluminum, and plastics.

Measurement Range: 0.1 … 5 m/s
Resolution: 0.001 m/s
Accuracy: 2%
Pipe Size:DN15 / 1/2"
Display Type: OLED
Analog Output: 4 … 20mA

Ultrasonic testing device PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificat

715,90 €

Price excl. VAT &. delivery

The Ultrasonic testing device can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic testing device.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

Ultrasonic testing device PCE-TG 300-NO2

1.066,90 €

Price excl. VAT &. delivery

The PCE-TG 300-NO2 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
Diameter: 14 mm / 0.55"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 2.5 MHz
Bluetooth

Ultrasonic testing device PCE-TG 150 F2.5

595,90 €

Price excl. VAT &. delivery

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F

Ultrasonic testing device PCE-UFM 20

929,90 €

Price excl. VAT &. delivery

With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN20 / 3/4" and various pipe materials such as steel, copper, aluminum, and plastics.

Measurement Range: 0.1 … 5 m/s
Resolution: 0.001 m/s
Accuracy: 2%
Pipe Size:DN20 / 3/4"
Display Type: OLED
Analog Output: 4 … 20mA