Grain Moisture Analyzer PCE-A-315
£ 6,444.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-A-315 inline moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


- Boasts a measurement range of 5% to 40% for moisture content during
  continuous mass flow
with an error of just ±0.5% from 5% to 18% grain
  moisture
- Lowers energy costs by enabling shorter drying times and reduces labor costs
  by automating the moisture monitoring process
- Provides nearly maintenance-free operation, delivering consistently accurate
  moisture readings over time
- Analog output of 4 to 20 mA can be converted to digital for dryer control

 

Liquid Material Moisture Analyzer PCE-MWM 220
£ 5,206.00
Price excl. VAT &. delivery
2 year Warranty

Moisture analyzers for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture analyzer for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Limits of permissible absolute error of the measurements: Δ= 0,035 +0,05·W
- Temperature measurement range: -40 ... +150 °C

Bulk Material Moisture Analyzer PCE-MWM 240-A
£ 4,442.00
Price excl. VAT &. delivery
2 year Warranty

Designed specifically for use real-time measurement of percent moisture measurement of bulk materials. Material in flowing mass, such as granular materials, sand, sawdust, fly ash (mineral), wood chips (surface to 5 cm), grain, powders, seed, and pastes is continuously measurable. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. 

 

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

 

Bulk Material Moisture Analyzer PCE-MWM 240-B
£ 5,073.00
Price excl. VAT &. delivery
2 year Warranty

Suitable for determining the humidity of bulk substances, this bulk material moisture analyser can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Wood Moisture Analyzer PCE-MWM 210
£ 3,960.00
Price excl. VAT &. delivery
2 year Warranty

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)
- Questionnaire starts evaluation process

Oil and Sand Moisture Analyzer PCE-MWM 200
£ 3,822.00
Price excl. VAT &. delivery
2 year Warranty

The moisture analyzer is a sensor for measuring moisture of sand and liquids consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture analyzer is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, and fuels (CWF).


- Readability mass fraction of water: 0 ... 100%
- Moisture measurement range: ± 0.1 ... 10% (water mass fraction))
- Maximum permissible absolute error moisture measurement: Varies by material, lab test required
- Temperature range: +5 ... +80 °C

Wood Moisture Analyzer PCE-MWM 300P
£ 3,783.00
Price excl. VAT &. delivery
2 year Warranty

For industrial continuous production of wood pellets, chips, sawdust and similar materials when on-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 300P moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: -40 ... +150 °C  (-40 ... +302 °F)
- Current consumption: 200 mA
- Power supply : 24 (18 ... 36) VDC
- Questionnaire starts evaluation process
- Application: pellets, wood chips

Soil and Gravel Moisture Analyzer PCE-MWM 230
£ 3,515.00
Price excl. VAT &. delivery
2 year Warranty

VHF-Band Moisture Analyzer Crushed Stone, Gravel, Ore (conveyor). The device is resistant to corrosion (stainless steel and dielectric materials) and can operate in the conditions deviating from the norm, for example, at temperatures of 145 °C. The moisture Analyzer probe can be mounted on the walls in the hoppers, in pipelines or on trays in conveyors. Due to pluggable design this version of the moisture analyzer can also be used for soil moisture control.


- Measurement range: 0 ... 100 %
- Limits of error: <0.5% below 10% moisture
- Range of working temperatures:
  0 ... +90 °C (industrial version)
  0 ... +115 °C (extended temperature range) 
  0 ... +250 °C (drying kilns)

Waste Paper Moisture Analyzer PCE-W3
£ 569.00
Price excl. VAT &. delivery
2 year Warranty

PCE-W3 is a portable handheld digital moisture analyzer used to measure the moisture content of waste paper. This resistance-based moisture analyzer can measure the moisture content of waste paper in compressed stacks and bales. In addition, this moisture analyzer can measure the moisture content of a single piece or sheet of waste paper.


- Moisture content measurement range: 6 ... 30 %
- Resolution: 0.1 %
- Accuracy: ±10 % of measurement value

 

High Precision Moisture Analyzer PCE-MA 60XT
£ 2,180.00
Price excl. VAT &. delivery
2 year Warranty
The high precision moisture analyzer balance enables moisture determinations with a resolution of 0.001 %. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.

- Weighing range: 60 g
- Readability: 0.1 mg = 0.0001 g / 0.001%.
- Drying temperature up to 160°C
- Live graph of moisture content
- Moisture content %
- Dry content %
- ATRO %
- Weight
- Product database for drying parameters
- RS232 / USB interface
- Storage on USB stick possible

- Attention to the power supply when ordering!
Paper Moisture Meter FMD 6
£ 885.00
Price excl. VAT &. delivery
2 year Warranty

The FMD 6 is a handy and versatile paper moisture meter for reliable measurement of the moisture content of paper, wood and construction materials. The paper moisture meter has preset characteristic curves for the moisture measurement of specific materials. The moisture meter needs external sensors (sold separately - please see accessory list) to operate. The sensors can be positioned on the surface of a material or inserted into a material, thereby permitting either non-destructive or destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%
- Memory stores up to 1,000 measurement values for transfer to PC using
  included software

Paper Moisture Meter FME
£ 627.00
Price excl. VAT &. delivery
2 year Warranty

FME is a handheld paper moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%

High Precision Moisture Analyzer PCE-MA 60XT-ICA incl. ISO calibration certificate
£ 2,296.00
Price excl. VAT &. delivery
2 year Warranty
The high precision moisture analyzer balance enables moisture determinations with a resolution of 0.001 %. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.

- Weighing range: 60 g
- Readability: 0.1 mg = 0.0001 g / 0.001%.
- Drying temperature up to 160°C
- Live graph of moisture content
- Moisture content %
- Dry content %
- ATRO %
- Weight
- Product database for drying parameters
- RS232 / USB interface
- Storage as TXT file directly on USB stick possible
incl. ISO calibration certificate

- Attention to the power supply when ordering!
Moisture Analyzing Balance PCE-MA 60XT
£ 2,180.00
Price excl. VAT &. delivery
2 year Warranty
The moisture analyzer balance enables moisture determinations with a resolution of 0.001 %. The operation of this moisture analyzer balance is very simple. Set the drying temperature, place the sample and start drying.

- Weighing range: 60 g
- Readability: 0.1 mg = 0.0001 g / 0.001%.
- Drying temperature up to 160°C
- Live graph of moisture content
- Display: Moisture content % / Dry content % / ATRO % / Weight
- Product database for drying parameters
- RS232 / USB interface
- Storage as TXT file directly on USB stick possible

Attention to the power supply when ordering!
Moisture Analyzer PCE-MA 110TS
£ 930.00
Price excl. VAT &. delivery
2 year Warranty
The moisture analyzer has a moisture measuring range of 0 … 100%. The moisture analyzer is operated via the 5" touchscreen. To determine the moisture content with the moisture analyzer, a sample is evenly distributed on the sample pan.

Weighing range: 0 ... 110 g / 0 ... 3.88 oz
- Resolution: 0.001 g
- Memory for 32 drying parameters
- 5" touch screen for easy operation
- RS-232 interface for connection to a PC
Multifunction Moisture Analyzer FMD 6
£ 885.00
Price excl. VAT &. delivery
2 year Warranty

The FMD 6 is a handy multifunction moisture analyzer  for reliable measurement of the moisture content of paper, wood and construction materials. The multifunction moisture analyzer has preset characteristic curves for the moisture measurement of specific materials. The moisture analyzer needs external sensors (sold separately - please see accessory list) to operate. The sensors can be positioned on the surface of a material or inserted into a material, thereby permitting either non-destructive or destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%
- Memory stores up to 1,000 measurement values for transfer to PC using
  included software

Multifunction Moisture Analyzer PCE-MA 200
£ 1,090.00
Price excl. VAT &. delivery
2 year Warranty

The Multifunction Moisture Analyzer PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The multifunction moisture analyzer dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.


- Weighing range: 200 g / 7.05 oz
- Resolution: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
Accuracy to 0.01 %

Moisture Analyzer PCE-MA 200TS
£ 842.00
Price excl. VAT &. delivery
2 year Warranty
Our moisture analyzer enables easy determination of absolute moisture in various materials. A significant advantage of an moisture analyzer over devices using capacitive measuring methods is that the moisture analyzer operates independently of characteristic curves and provides more accurate results.

- Weighing range: 200 g
- Measurement range from 0 ... 100 %
- High resolution of 0.01 g
- Heating temperature from 40 ... 165 °C
- Memory for 32 measurements
- LC Touch Display
- Data interface: RS232