Tabletop Scale PCE-MA 100
£ 1,019.00
Price excl. VAT &. delivery
2 year Warranty

The tabletop scale PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the benchtop scale dries the material to be weighed, and then calculates the moisture content from the weight difference.


- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time

Benchtop Scale PCE-MA 100
£ 1,019.00
Price excl. VAT &. delivery
2 year Warranty

The benchtop scale PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the benchtop scale dries the material to be weighed, and then calculates the moisture content from the weight difference.


- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time

LAB Scale PCE-MA 100
£ 1,019.00
Price excl. VAT &. delivery
2 year Warranty

The LAB Scale PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the laboratory balance dries the material to be weighed, and then calculates the moisture content from the weight difference.


- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time

Inspection Camera PCE-VMM 100
£ 4,431.00
Price excl. VAT &. delivery
2 year Warranty
The full HD inspection camera is used to zoom in on components, assemblies and many other items. The inspection camera is a reflected-light microscope with an enlargement of up to 206x

- Magnification: 32x ... 206x
- Resolution: 1920 x 1080 pixels
- Autofocus
- HDMI output
Material Tester PCE-UCD 100
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The material testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative material testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
- Includes a camera for measuring crack width
- Bandwidth: 1 to 500 kHz
- Display: 10.1" TFT touchscreen display
- Internal storage: 8 GB
Tabeltop Scale PCE-MA 100-ICA incl. ISO Calibration Certificate
£ 1,095.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Tabletop Scale PCE-MA 100-ICA allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the Tabletop  Scale dries the material to be weighed, and then calculates the moisture content from the weight difference.


- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
- incl. ISO Calibration Certificate

LAB Scale PCE-MA 100-ICA incl. ISO Calibration Certificate
£ 1,095.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The LAB Scale PCE-MA 100-ICA allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the LAB Scale dries the material to be weighed, and then calculates the moisture content from the weight difference.


- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
- incl. ISO Calibration Certificate

Benchtop Scale PCE-MA 100-ICA incl. ISO Calibration Certificate
£ 1,095.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Benchtop Scale PCE-MA 100-ICA allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the Benchtop Scale dries the material to be weighed, and then calculates the moisture content from the weight difference.


- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
- incl. ISO Calibration Certificate

Data Logger PCE-CPC 100
£ 4,138.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The state-of-the-art data logger enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the data logger is done by an internal pump.

Real-time measurement from 0.3 μm ... 10 μm
Output in particles/28.3L or particles/m³
- Visual and audible alarm
  when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement
Real-time display of clean room class
  ISO 14644-1
Air Sampler PCE-CPC 100
£ 4,138.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The state-of-the-art air sampler enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air sampler is done by an internal pump.

Real-time measurement from 0.3 μm ... 10 μm
Output in particles/28.3L or particles/m³
- Visual and audible alarm
  when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement
Real-time display of clean room class
  ISO 14644-1
Dust Monitor PCE-CPC 100
£ 4,138.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the dust monitor is done by an internal pump.

Real-time measurement from 0.3 μm ... 10 μm
Output in particles/28.3L or particles/m³
- Visual and audible alarm
  when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement
Real-time display of clean room class
  ISO 14644-1
Particle Counter PCE-CPC 100
£ 4,138.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The state-of-the-art particle counter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter is done by an internal pump.

Real-time measurement from 0.3 μm ... 10 μm
Output in particles/28.3L or particles/m³
- Visual and audible alarm
  when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement
Real-time display of clean room class
  ISO 14644-1
Illuminometer PCE-LMD 100
£ 3,320.00
Price excl. VAT &. delivery
2 year Warranty
The illuminometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The illuminometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

- Measurement range: 0.00 ... 50000 cd/m²
- Resolution: 0.01 cd/m²
- Accuracy class:
  A in accordance with DIN 5032-7
- External sensor with multifunction button
- 8 GB measured value memory
Photometer PCE-LMD 100
£ 3,320.00
Price excl. VAT &. delivery
2 year Warranty
The photometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The photometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

- Measurement range: 0.00 ... 50000 cd/m²
- Resolution: 0.01 cd/m²
- Accuracy class:
  A in accordance with DIN 5032-7
- External sensor with multifunction button
- 8 GB measured value memory
Full HD Microscope PCE-VMM 100
£ 4,431.00
Price excl. VAT &. delivery
2 year Warranty
The full HD microscope is used to zoom in on components, assemblies and many other items. The microscope is a reflected-light microscope with an enlargement of up to 206x.

- Magnification: 32x ... 206x
- Resolution: 1920 x 1080 pixels
- Autofocus
- HDMI output
NDT Test Instruments PCE-UCD 100
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The NDT test instrument sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative NDT test instrument not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
- Includes a camera for measuring crack width
- Bandwidth: 1 to 500 kHz
- Display: 10.1" TFT touchscreen display
- Internal storage: 8 GB
Ultrasonic Tester / Ultrasonic Testing PCE-UCD 100
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic tester / ultrasonic testing sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this ultrasonic tester / ultrasonic testing enables accurate verification of concrete piles, concrete beams, and other components. This innovative ultrasonic tester / ultrasonic testing not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
- Includes a camera for measuring crack width
- Bandwidth: 1 to 500 kHz
- Display: 10.1" TFT touchscreen display
- Internal storage: 8 GB
Environmental Meter PCE-LMD 100
£ 3,320.00
Price excl. VAT &. delivery
2 year Warranty
The environmental meter is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The environmental meter guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

- Measurement range: 0.00 ... 50000 cd/m²
- Resolution: 0.01 cd/m²
- Accuracy class:
  A in accordance with DIN 5032-7
- External sensor with multifunction button
- 8 GB measured value memory