Motion analysis of rotating machines is quick and easy with our car measuring device. The car measuring device is equipped with 3 UVA high-power LEDs, which together generate a light intensity of 202 μW/cm² at a distance of 30 cm.
Motion analysis of rotating machines is quick and easy with our car measuring device. The car measuring device is equipped with 3 high-power UVA LEDs (385 nm), which together generate a light intensity of 317 μW/cm² at a distance of 30 cm.
- Flash frequency 60 ... 300000 FPM
- Light colour: UV light (380 ... 390 nm)
- Accuracy: 0.001 %
- Digital pulse width modulation
- Phase shift - 360 ° ... + 360 °
- Quick adjustment with x2 and ÷2 button - 3 UVA high-power LEDs
With the car measuring device AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the car measuring device.
Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement
The car measuring device is battery powered and easy to use. This car measuring device can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.
- Frequency range: 100 Hz to 10 kHz - headphones, 70 mm sensor, 290 mm sensor - Weight: 240 g, with battery - Dimensions: 206 mm x 50 mm x 32 mm
PCE-VE 1000 is a car measuring device, borescope, videoscope or inspection camera display featuring an exceptionally large 7" high-resolution LCD screen for impressive on-screen viewing capabilities.
- Stores photos and saves videos with sound to the included 8 GB SD memory card (max. compatibility 32 GB) for quick and easy transfer to a computer - 360° image rotation (in 90° steps) - Digital zoom on camera
Display only. Camera cables (from diam. 5.5 mm / 0.22 in, 2-way, 4-way articulation) are sold separately. See accessories to customize.
The multiway car measuring device with a cable length of one metre and a camera head diameter of 6 mm is the ideal tool for endoscopy. The LED illuminance on the camera head can be adjusted in 5 steps up to 25,000 lux.
The two-way optics is a great advantage of the car measuring device or inspection camera. There is easy control of the camera head with the car measuring device.
The car measuring device allows you to capture images and videos, and the videos are also stored with an audio recording.
The car measuring device PCE-VE 1030N is a versatile videoscope or video borescope inspection camera with a large 7" high-resolution display. This car measuring device captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.
- Cable length: 30 m / 98 ft - Camera head diameter: 28 mm / 1.1 in - SD card memory included - Waterproof cable and camera
The two-way optics is a great advantage of the car measuring device. There is easy control of the camera head with the car measuring device.
The car measuring device allows you to capture images and videos, and the videos are also stored with an audio recording.
The PCE-VE 1036HR-F is a versatile car measuring device. Various videoscope or endoscope cables with different characteristics can be connected to the car measuring device. A special advantage of the car measuring device is the large display, which offers the user the best possible overview of the area to be viewed due to its dimensions and resolution. The endoscope camera allows the recording of pictures and videos, whereby the videos are additionally stored with an audio recording.
- 3 m / 9.8 ft endoscope cable with 2-way camera cable - Stores images and video - 8 GB Memory Card incl.
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Diameter: Ø2.2mm / 0.08" - Cable length: 1m / 3.2 ft - Camera direction: 90° - Resolution: 160,000 pixels - Focusing range: 5 ... 50 mm / 0.19 ... 1.96" - 7" touch screen for easy operation - replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Diameter: Ø2.8mm / 0.11" - Cable length: 2m / 6.5 ft - Camera direction: 0° - Resolution: 160,000 pixels - Focusing range: 5 ... 50 mm / 0.19 ... 1.96" - 7" touch screen for easy operation - Replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Endoscope cable length: approx. 2 m / 6.5 ft - Diameter: 3.8mm / 0.15" - Front camera with resolution: 1,000,000 pixels - Front camera viewing angle 120° - Focus 10 … 100 mm / 0.39 … 3.9" - Movable camera head 46 mm / 1.8" long - Bending radius approx. 35 mm / 1.3" at 90° - 7" touch screen for easy operation - replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Endoscope cable length: approx. 2 m / 6.5 ft - Diameter: 3.8mm / 0.15" - Camera resolution 160,000 pixels each - Viewing angle front camera 120°, side camera 90° - Focusing distance 5 … 50 mm / 0.19 ... 1.96" each - Camera head length: 42 mm / 1.6" - Bending radius at 90° 35 mm / 1.3" - Live images from both cameras side by side - 7" touch screen for easy operation - Replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Borescope camera cable length: 2 m / 6.5 ft - Cable diameter: 6mm / 0.23" - Direction of view of the camera frontal - Camera resolution 1 million pixels - Camera viewing angle 120° - Focusing distance 10 … 100 mm / 0.39 … 3.9" - Flexible camera head length 60 mm / 2.3" - Radius at 90° bend 50 mm / 1.9" - 7" touch screen for easy operation - replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Diameter: Ø6mm / 0.23" - Cable length: 5m / 16.4 ft - Camera direction: 0° - Resolution: 1MP - Focusing range: 5 ... 50 mm / 0.19 ... 1.96" - 7" touch screen for easy operation - replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
The car measuring device PCE-VE 180 is a rechargeable handheld pistol-grip videoscope or video borescope inspection camera with video recording and image capture functionality. Equipped with built-in LED lighting on the waterproof camera tip, the car measuring device features a detachable remote control with integrated 3.5" LCD for easy viewing and navigation. The remote control communicates using radio transmission at 2.4 GHz.
- Semi-flexible gooseneck cable - 1 m / 3.28 ft cable length - 3.9 mm / .16 in camera cable diameter - Includes detachable 4.5 mm / .18 in mirror, hook and magnet
PCE-VE 200 is a car measuring device, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This car measuring device provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.
- 4.5 mm / 0.18 in diameter, semi-rigid - 1 m / 3.28 ft cable length - 180° image rotation
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
