The car measuring device PCE-DC 50-ICA is a meter for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the car measuring device can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.
- Current measurement up to 1000 A - Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
- incl. ISO Calibration Certificate
This car measuring device was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this car measuring device.
- AC/DC current, AC voltage and frequency measurement - AC voltage test (contactless test): 100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz - DCA zero point function
This car measuring device was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this car measuring device.
- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
PCE-DRA 1 is an antifreeze car measuring device used to determine the percentage or content and freezing point of propylene glycol- and ethylene glycol-based solutions. This waterproof IP65-rated car measuring device features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.
Measurement parameters: - Ethylene glycol %, propylene glycol %, temperature °C - Measuring range: 0 ... 60 % ethylene glycol - Resolution: 0.1 % / 0.1 ° - Accuracy: ±0.5 % / ±0.5 °C - Automatic temperature compensation (ATC) - Easy calibration with distilled water
The car measuring device uses the so-called "stroboscope effect" to analyse fast movements, vibrations or periodic processes. With the help of 9 high-intensity LEDs, the car measuring device generates short flashes of light with an illuminance of up to 1500 lx. These flashes of light are emitted in synchronisation with the frequency of the movement to be monitored until the object appears to stand still to the observer.
The car measuring device is a handy device for measuring the rotational speed of objects with a measuring range of 60 to 20,000 rpm. The car measuring device is suitable for inspecting objects with periodic movements and for detecting faults.
The car measuring device is a handy device for measuring the rotational speed of objects with a measuring range of 60 to 20,000 rpm. The car measuring device is suitable for inspecting objects with periodic movements and for detecting faults.
- Measuring range: 60 ... 20000 RPM
- Coarse adjustment: +10, +100 RPM
- Fine adjustment: +0.1, +1 RPM
- Accuracy: 0.05 %
- 2.1" LC display with illumination
- Data storage function up to 10 values - incl. ISO-calibrartion-certificate
The car measuring device PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This car measuring device has a small design and has a low weight. Thus, the car measuring device can be conveniently used even in measurements in hard to reach places.
The car measuring device PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This car measuring device has a small design and has a low weight. Thus, the car measuring device can be conveniently used even in measurements in hard to reach places.
Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
- Incl. ISO calibration certificate
Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special car measuring devices are required to check the function, the protective devices and the insulation.
- CP and PP simulation - Direct connection for wallboxes - Adapter with charging plugs Type 1 and Type 2 - CP simulation (communication line) A, B, C, D, error
The Car Measuring Device is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.
The Car Measuring Device is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.
- PE pre-test
- Proximity-Pilot PP / Control-Pilot CP
- Simulation CP error "E" / PE error
- Mains socket for measuring purposes
- Safety measuring sockets - incl. type 2 plug and adapter to type 1
The car measuring device PCE-HVAC 6 was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6 car measuring device is ideal for many inspection and maintenance jobs in this area.
- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
PCE-IVE 300 is a car measuring device or video borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the car measuring device captures both picture and video and saves the files to an SD card memory (included).
- Telescopic pole extends up to 1 m / 3.3 ft
- Gooseneck camera head diameter of 28 mm / 1.11 in
- Waterproof and dustproof IP68 ingress protection rating
The car measuring device PCE-IVE 320 is a borescope, inspection camera, videoscope or industrial endoscope that comes with a rigid telescoping pole that extends up to 2.3 m (7.6 ft) in length (3 m / 9.8 ft long total with camera connection). Plus, the car measuring device has a 0.3 megapixel camera with a 23 mm (0.91 in) diameter flexible head with microphone and 12 white LEDs offering adjustable brightness. Includes wheel attachment for under vehicle inspection.
- Telescopic pole extends up to 2.3 m / 7.6 ft (3 m /9.8 ft long total with camera connection) - 12.7 cm / 5" LCD monitor with 800 x 480 pixel resolution - Video recording capability - Accommodates SD memory cards from 2 ... 32 GB - Spare battery to allow all day operation
The PCE-IVE 330 car measuring device or inspection camera is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment.
Thanks to the 3 m / 9.8 ft telescopic rod of the car measuring device, it is also possible to view areas that are difficult to access. Visual monitoring with the car measuring device is supported by the flexible camera head.
- Camera length: 320 mm / 12.5" - Camera diameter: 23 mm / 0.9" - Flexible camera head - 8" LCD monitor - Memory function
The motion analysis of rotating machines is quick and easy with our car measuring device. The car measuring device is equipped with 3 high-power LEDs, collectively producing a light intensity of 11,730 Lux at 20 cm / 1000 Hz. With the car measuring device, you can adjust the flash frequency in both FPM and Hz. Additionally, it is compact, portable, and operates independently thanks to the built-in battery.
The motion analysis of rotating machines is quick and easy with our car measuring device. The car measuring device is equipped with 3 high-power LEDs, collectively producing a light intensity of 11,730 Lux at 20 cm / 1000 Hz. With the car measuring device, you can adjust the flash frequency in both FPM and Hz. Additionally, it is compact, portable, and operates independently thanks to the built-in battery.
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
